Sheet metal cutting and piercing operations planning and tools configuration by an expert system

This paper describes the development of an expert system for both process planning and die design of sheet metal cutting and piercing operations. Knowledge for the system is acquired from practical handbooks, theory and empirical knowledge from industrial partners and is expressed as “crude” rules, transformed by the knowledge engineer into production rules. These are then coded into constructs of the CLIPS expert system development environment. This process is explained using a number of examples. The expert system comprises of five modules: initial calculations (including data input), process planning, finishing operation, die and press selection, and tools selection. Each module draws upon one or more among 18 rule pools defined around the important notions characterising the problem studied. The results of the expert system can be used by both the designer deciding on the production feasibility (manufacturability) for a sheet metal component and by the manufacturer receiving advice either on the hardware needed or on the process plan.

[1]  K. Narasimhan,et al.  A Hybrid Intelligent Systems Approach for Die Design in Sheet Metal Forming , 2000 .

[2]  Morten Rikard Jensen,et al.  Optimization of the draw-die design in conventional deep-drawing in order to minimise tool wear , 1998 .

[3]  G. S. Sekhon,et al.  An expert system for optimal selection of a press for a sheet metal operation , 1999 .

[4]  Chul Kim,et al.  An Automated Progressive Process Planning and Die Design and Working System for Blanking or Piercing and Bending of a Sheet Metal Product , 1999 .

[5]  Sang B. Park.  An expert system of progressive die design for electron gun grid parts , 1999 .

[6]  Taylan Altan,et al.  Process and die design for multi-step forming of round parts from sheet metal , 1996 .

[7]  Rajender Singh,et al.  PROPLAN: an expert system for optimal planning of sheet metal operations , 2005 .

[8]  David Alan Bourne,et al.  Design and Manufacturing of Sheet Metal Parts: Using Features to Aid Process Planning and Resolve Manufacturability Problems , 1997 .

[9]  Peng Ying-hong,et al.  Research on hybrid expert system application to blanking technology , 2001 .

[10]  Andrew Y. C. Nee,et al.  Integrated Feature-Based Modelling and Process Planning of Bending Operations in Progressive Die Design , 2002 .

[11]  Chul Kim,et al.  A study on the development of computer-aided process planning system for electric product with bending and piercing operations , 2002 .

[12]  S. S. Kang,et al.  Application of computer-aided process planning system for non-axisymmetric deep drawing products , 2002 .

[13]  Yinghong Peng,et al.  Development of a Practical Blank Layout Optimisation System for Stamping Die Design , 2002 .