Analysis and modeling of a piezoelectric energy harvester for powering a wireless sensor

The work presented aims at modeling, designing and implementing an energy harvesting system capable of generating electricity from environmental vibrations. Subject of the analysis is a piezoelectric bimorph; this particular transducer, composed of two layers of piezoceramic material, is clamped in a cantilever configuration and is dynamically bent due to vibrations. The resulting deformation ensures enough current to power the electronic circuit of a wireless sensor. An analytical model is adopted, that describes the dynamics of the mechanical system using an electrical duality. In particular the coupling of the variables is represented by an equivalent transformer. The obtainable voltage and power are investigated, focusing on the influence of the electric load on the performance of the conversion process. In addition, to overcome the limitations related to the analytical study, a finite element model is provided, capable of simulating the behavior of the system more accurately. Finally, both models are validated by means of experimental tests, showing the mutual influence between the mechanical and the electrical domain.

[1]  Seth R. Sanders,et al.  Fundamental limits on energy transfer and circuit considerations for piezoelectric transformers , 1998 .

[2]  Daniel J. Inman,et al.  Energy Harvesting Technologies , 2008 .

[3]  David L. Churchill,et al.  Power management for energy harvesting wireless sensors , 2005, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[4]  Publication and Proposed Revision of ANSI/IEEE Standard 176-1987 "ANSI/IEEE Standard on Piezoelectricity" , 1996, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[5]  W. P. Mason,et al.  An Electromechanical Representation of a Piezoelectric Crystal Used as a Transducer , 1935, Proceedings of the Institute of Radio Engineers.

[6]  J. M. Gilbert,et al.  Comparison of energy harvesting systems for wireless sensor networks , 2008, Int. J. Autom. Comput..

[7]  Ferruccio Resta,et al.  A test rig and numerical model for investigating truck mounted concrete pumps , 2011 .

[8]  Ferruccio Resta,et al.  Vibration reduction on a nonlinear flexible structure through resonant control and disturbance estimator , 2012, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[9]  D. Peroulis,et al.  Low-frequency meandering piezoelectric vibration energy harvester , 2012, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[10]  Ferruccio Resta,et al.  Linear and non-linear systems identification for adaptive control in mechanical applications vibration suppression , 2012, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[11]  Jan M. Rabaey,et al.  A study of low level vibrations as a power source for wireless sensor nodes , 2003, Comput. Commun..

[12]  Siyuan He,et al.  Finite element modeling of beam bimorph piezoelectric power harvesters including visco-elasticity , 2009, International Conference on Smart Materials and Nanotechnology in Engineering.

[13]  Ferruccio Resta,et al.  Overview on the truck mounted concrete boom pump: a dynamic numerical model for active control logic definition , 2011 .

[14]  Henry A. Sodano,et al.  A review of power harvesting using piezoelectric materials (2003–2006) , 2007 .

[15]  Paul K. Wright,et al.  A piezoelectric vibration based generator for wireless electronics , 2004 .

[16]  Daniel J. Inman,et al.  Piezoelectric Energy Harvesting , 2011 .

[17]  Meiling Zhu,et al.  Analyses of power output of piezoelectric energy-harvesting devices directly connected to a load resistor using a coupled piezoelectric-circuit finite element method , 2009, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[18]  The Truck Mounted Concrete Boom Pump : A Dynamic Numerical Model , .