The effect of ammonia addition on soot nanostructure and composition in ethylene laminar flames

[1]  Xiaobei Cheng,et al.  Effects of ammonia on morphological characteristics and nanostructure of soot in the combustion of diesel surrogate fuels. , 2023, Journal of hazardous materials.

[2]  H. Pitsch,et al.  Probing the influence of hydrogen cyanide on PAH chemistry , 2022, Proceedings of the Combustion Institute.

[3]  Xiaobei Cheng,et al.  Analysis of Inhibitory Mechanisms of Ammonia Addition on Soot Formation: A Combined ReaxFF MD Simulations and Experimental Study , 2022, Energy & Fuels.

[4]  Nick A. Eaves,et al.  Experimental and numerical investigation of soot growth and inception in an ammonia-ethylene flame , 2022, Proceedings of the Combustion Institute.

[5]  B. Tian,et al.  Measurements of Soot Particulate Emissions of Ammonia-Ethylene Flames Using Laser Extinction Method , 2022, Energies.

[6]  Tengyu Ma,et al.  Occurrence, partition behavior, source and ecological risk assessment of nitro-PAHs in the sediment and water of Taige Canal, China. , 2022, Journal of environmental sciences.

[7]  Can Shao,et al.  Effects of ammonia addition on soot formation in ethylene laminar premixed flames , 2021, Combustion and Flame.

[8]  Xiaobei Cheng,et al.  Study of effects of ammonia addition on soot formation characteristics in n-heptane co-flow laminar diffusion flames , 2021, Combustion and Flame.

[9]  Xiaobei Cheng,et al.  Effects of ammonia addition on soot formation in ethylene laminar diffusion flames , 2021, Fuel.

[10]  M. Marcus,et al.  Quantification of the carbon bonding state in amorphous carbon materials: A comparison between EELS and NEXAFS measurements , 2021, Carbon.

[11]  A. Masri,et al.  Soot formation in laminar flames of ethylene/ammonia , 2020, Combustion and Flame.

[12]  M. Thomson,et al.  The effect of elevated reactant temperatures on soot nanostructures in a coflow diffusion ethylene flame , 2020 .

[13]  M. García-Pérez,et al.  Deconvoluting the XPS spectra for nitrogen-doped chars: An analysis from first principles , 2020 .

[14]  A. Rocca,et al.  Quantifying soot nanostructures: Importance of image processing parameters for lattice fringe analysis , 2020, Combustion and Flame.

[15]  G. D. da Rocha,et al.  Occurrence of the potent mutagens 2- nitrobenzanthrone and 3-nitrobenzanthrone in fine airborne particles , 2019, Scientific Reports.

[16]  A. Ciajolo,et al.  HRTEM and EELS investigations of flame-formed soot nanostructure , 2018, Fuel.

[17]  Ashwani Kumar Thakur,et al.  The Toxicological Mechanisms of Environmental Soot (Black Carbon) and Carbon Black: Focus on Oxidative Stress and Inflammatory Pathways , 2017, Front. Immunol..

[18]  Kentaro Yoshida,et al.  Diamond-like carbon coating under oleic acid lubrication: Evidence for graphene oxide formation in superlow friction , 2017, Scientific Reports.

[19]  Anton D. Sediako,et al.  Comparison of multiple diagnostic techniques to study soot formation and morphology in a diffusion flame , 2017 .

[20]  Seth B. Dworkin,et al.  CoFlame: A refined and validated numerical algorithm for modeling sooting laminar coflow diffusion flames , 2016, Comput. Phys. Commun..

[21]  E. Müller,et al.  Practical aspects of the quantification of sp2-hybridized carbon atoms in diamond-like carbon by electron energy loss spectroscopy , 2016 .

[22]  Yi Luo,et al.  Unraveling the formation mechanism of graphitic nitrogen-doping in thermally treated graphene with ammonia , 2016, Scientific Reports.

[23]  R. Niessner,et al.  Nitro-PAH formation studied by interacting artificially PAH-coated soot aerosol with NO2 in the temperature range of 295–523 K , 2010 .

[24]  Song-Charng Kong,et al.  Demonstration of Compression-Ignition Engine Combustion Using Ammonia in Reducing Greenhouse Gas Emissions , 2008 .

[25]  B. Rand,et al.  Investigating carbonization and graphitization using electron energy loss spectroscopy (EELS) in the transmission electron microscope (TEM) , 2007 .

[26]  R. V. Vander Wal,et al.  Carbon Nanostructure Examined by Lattice Fringe Analysis of High-Resolution Transmission Electron Microscopy Images , 2004, Applied spectroscopy.

[27]  David B. Williams,et al.  Quantitative near‐edge structure analysis of diamond‐like carbon in the electron microscope using a two‐window method , 1995 .

[28]  S. G. Chang,et al.  Formation of pollution particulate nitrogen compounds by NO-soot and NH3-soot gas-particle surface reactions , 1975 .

[29]  M. Thomson,et al.  The temperature dependence of soot formation in laminar coflow aromatic flames , 2022, Combustion and Flame.

[30]  J. Akroyd,et al.  On the thermophoretic sampling and TEM-based characterisation of soot particles in flames , 2021 .

[31]  Nick A. Eaves,et al.  Experimental and numerical study of the evolution of soot primary particles in a diffusion flame , 2019, Proceedings of the Combustion Institute.

[32]  Jochen A. H. Dreyer,et al.  Internal structure of soot particles in a diffusion flame , 2019, Carbon.

[33]  Itf.  Decarbonising Maritime Transport: Pathways to zero-carbon shipping by 2035 , 2018 .

[34]  Markus Kraft,et al.  HRTEM evaluation of soot particles produced by the non-premixed combustion of liquid fuels , 2016 .

[35]  R. Bilbao,et al.  Impact of nitrogen oxides (NO, NO2, N2O) on the formation of soot , 2014 .

[36]  Hai Wang.  Formation of nascent soot and other condensed-phase materials in flames , 2011 .

[37]  Andrea D’Anna,et al.  Combustion-formed nanoparticles , 2009 .

[38]  M. Frenklach,et al.  Detailed modeling of soot particle nucleation and growth , 1991 .