Effects of furniture and contents on peak cooling load

Abstract We assess the impact that furniture and contents (i.e. internal mass) have on zone peak cooling loads using a perimeter zone model in EnergyPlus across 5400 parametric simulation runs. The zone parameters were HVAC system type (overhead, underfloor, and thermally activated building system (TABS)), orientation, window to wall ratio, and building envelope mass. The internal mass parameters were the amount, area, and the material type used. We also evaluated a new internal mass modeling method, which models direct solar radiation on the internal mass surface, an effect that is missing in current methods. We show how each of these parameters affect peak cooling load, highlighting previously unpublished effects. Overall, adding internal mass changed peak cooling load by a median value of −2.28% (−5.45% and −0.67% lower and upper quartiles respectively) across the studied parameter space. Though the median is quite low, this study highlights the range of effects that internal mass can have on peak cooling loads depending on the parameters used, and the discussion highlights the lack of guidance on selecting reasonable values for internal mass parameters. Based on this we recommend conducting an experimental study to answer outstanding questions regarding improved specification of internal mass parameters.

[1]  Joseph Andrew Clarke,et al.  Energy Simulation in Building Design , 1985 .

[2]  Yi Jiang,et al.  Application of radiant floor cooling in a large open space building with high-intensity solar radiation , 2013 .

[3]  Rea,et al.  Lighting Handbook: Reference & Application , 1993 .

[4]  Fred Bauman,et al.  Cooling load differences between radiant and air systems , 2013 .

[5]  경대호,et al.  Radiant Floor Cooling Systems , 2008 .

[6]  Kwang Ho Lee,et al.  Thermal decay in underfloor air distribution (UFAD) systems: Fundamentals and influence on system performance , 2012 .

[7]  Michael J. Witte,et al.  Analytical and comparative testing of EnergyPlus using IEA HVAC BESTEST E100-E200 test suite , 2004 .

[8]  Kwang Ho Lee,et al.  Simplified calculation method for design cooling loads in underfloor air distribution (UFAD) systems , 2011 .

[9]  Shengwei Wang,et al.  Parameter estimation of internal thermal mass of building dynamic models using genetic algorithm , 2006 .

[10]  Xavier Py,et al.  Selection criteria of thermal mass materials for low-energy building construction applied to conventional and alternative materials , 2013 .

[11]  Lin-Shu Wang,et al.  A study of building envelope and thermal mass requirements for achieving thermal autonomy in an office building , 2014 .

[12]  Shengwei Wang,et al.  A simplified dynamic model for existing buildings using CTF and thermal network models , 2008 .

[13]  Daniel E. Fisher,et al.  EnergyPlus: creating a new-generation building energy simulation program , 2001 .

[14]  Hongfa Di,et al.  Ideal thermophysical properties for free-cooling (or heating) buildings with constant thermal physical property material , 2006 .

[15]  John E. Seem.  Modeling of Heat Transfer in Buildings , 1987 .

[16]  Jon Hand,et al.  CONTRASTING THE CAPABILITIES OF BUILDING ENERGY PERFORMANCE SIMULATION PROGRAMS , 2008 .

[17]  Lina Yang,et al.  Cooling load reduction by using thermal mass and night ventilation , 2008 .

[18]  Feng Jiang,et al.  Analytical optimization of specific heat of building internal envelope , 2012 .

[19]  Xin Wang,et al.  New concepts and approach for developing energy efficient buildings: Ideal specific heat for building internal thermal mass , 2011 .

[20]  M. R. Shaw,et al.  Effective use of building mass , 1994 .