Optimization of block structure parameters of PEMFC novel block channels using artificial neural network

[1]  Yanzhou Qin,et al.  Numerical investigation of water droplet removal characteristics in novel block channels of PEMFC using dynamic wettability model , 2021, International Journal of Hydrogen Energy.

[2]  Hongwei Li,et al.  Multi-objective optimization of PEM fuel cell by coupled significant variables recognition, surrogate models and a multi-objective genetic algorithm , 2021 .

[3]  Yanzhou Qin,et al.  Numerical investigation of water droplet impact on PEM fuel cell flow channel surface , 2021 .

[4]  Hang Guo,et al.  A numerical study of baffle height and location effects on mass transfer of proton exchange membrane fuel cells with orientated-type flow channels , 2021 .

[5]  Yun Wang,et al.  Optimization of porous media flow field for proton exchange membrane fuel cell using a data-driven surrogate model , 2020 .

[6]  Yajuan Chen,et al.  Effect of superior mesenteric artery branch structure-based flow field on PEMFC performance , 2020 .

[7]  Lisa M. Jackson,et al.  Effectiveness of PEMFC historical state and operating mode in PEMFC prognosis , 2020 .

[8]  K. Mohammadzadeh,et al.  Numerical investigation of water droplet behavior in anode channel of a PEM fuel cell with partial blockage , 2020, Archive of Applied Mechanics.

[9]  Yujie Wang,et al.  Performance degradation prediction of proton exchange membrane fuel cell using a hybrid prognostic approach , 2020 .

[10]  Anthony D. Santamaria,et al.  Two-phase flow characterization in PEM fuel cells using machine learning , 2020 .

[11]  Yan Yin,et al.  Influence of corner structure of fuel cell serpentine channel on water removal , 2020 .

[12]  H. Mehnatkesh,et al.  Estimation of Water Coverage Ratio in Low Temperature PEM-Fuel Cell Using Deep Neural Network , 2020, IEEE Sensors Journal.

[13]  Yan Yin,et al.  Quantitative analysis of trapezoid baffle block sloping angles on oxygen transport and performance of proton exchange membrane fuel cell , 2020 .

[14]  Yanzhou Qin,et al.  Numerical and experimental investigation of baffle plate arrangement on proton exchange membrane fuel cell performance , 2020 .

[15]  Bowen Wang,et al.  AI-based optimization of PEM fuel cell catalyst layers for maximum power density via data-driven surrogate modeling , 2020 .

[16]  Majid Siavashi,et al.  Design optimization and thermal management of the PEMFC using artificial neural networks , 2019, Energy.

[17]  Hang Guo,et al.  Baffle shape effects on mass transfer and power loss of proton exchange membrane fuel cells with different baffled flow channels , 2019, International Journal of Energy Research.

[18]  Lisheng Cheng,et al.  Enhanced water removal performance of a slope turn in the serpentine flow channel for proton exchange membrane fuel cells , 2018, Energy Conversion and Management.

[19]  Guobin Zhang,et al.  Optimization design of the cathode flow channel for proton exchange membrane fuel cells , 2018, Energy Conversion and Management.

[20]  Yahya Erkan Akansu,et al.  Performance prediction of PEM fuel cell with wavy serpentine flow channel by using artificial neural network , 2017 .

[21]  Anthony D. Santamaria,et al.  Investigation of the performance improvement in decreasing aspect ratio interdigitated flow field PEMFCs , 2017 .

[22]  Chang-Bock Chung,et al.  A hybrid model combining a support vector machine with an empirical equation for predicting polarization curves of PEM fuel cells , 2017 .

[23]  Mohammad Jafar Kermani,et al.  Influences of bipolar plate channel blockages on PEM fuel cell performances , 2016 .

[24]  Dino Isa,et al.  Modeling of commercial proton exchange membrane fuel cell using support vector machine , 2016 .

[25]  M. Kermani,et al.  Enhancement of PEM fuel cell performance by flow channel indentation , 2016 .

[26]  S. Perng,et al.  A three-dimensional numerical investigation of trapezoid baffles effect on non-isothermal reactant transport and cell net power in a PEMFC , 2015 .

[27]  R. Chouikh,et al.  A numerical investigation of reactant transport in a PEM fuel cell with partially blocked gas channels , 2014 .

[28]  S. Perng,et al.  Effect of modified flow field on non-isothermal transport characteristics and cell performance of a PEMFC , 2014 .

[29]  Hui Wen Ku,et al.  Influences of operational factors on proton exchange membrane fuel cell performance with modified interdigitated flow field design , 2013 .

[30]  S. Therdthianwong,et al.  Mid-baffle interdigitated flow fields for proton exchange membrane fuel cells , 2011 .

[31]  Daniel Hissel,et al.  Diagnosis of polymer electrolyte fuel cells failure modes (flooding & drying out) by neural networks modeling , 2011 .

[32]  J. Kuo,et al.  Improvement of performance of gas flow channel in PEM fuel cells , 2008 .

[33]  Wei-Mon Yan,et al.  Humidity of reactant fuel on the cell performance of PEM fuel cell with baffle-blocked flow field designs , 2006 .

[34]  Hui Wen Ku,et al.  Effects of modified flow field on optimal parameters estimation and cell performance of a PEM fuel cell with the Taguchi method , 2012 .