Study on texture evolution and properties of silver thin films prepared by sputtering deposition

Abstract By observing XRD profiles, the evolution of the crystallographic orientation of silver thin films was monitored. Sputtering process conditions such as working pressure, deposition power and substrate temperature significantly influenced the relative fraction of the grains with (1 1 1) orientation (lowest energy plane in FCC structure). Sputtering conditions for higher adatom mobility such as moderate range of sputtering pressure (0.14–0.71 Pa) and higher deposition power resulted in more (1 1 1)-preferred orientation. The Ag thin films deposited under those conditions showed lower resistivity, higher film density, and optical reflectance. These phenomena were explained from the change of adatom mobility with varied process parameters. Higher adatom mobility could be obtained under moderate range of sputtering pressure and higher sputtering power. Higher adatom mobility promoted the growth of (1 1 1)-oriented grains at the expense of other grains, and resulted in higher film density and improved electrical and optical film properties.

[1]  J. Thornton.  High Rate Thick Film Growth , 1977 .

[2]  M. Ohring.  The Materials Science of Thin Films , 1991 .

[3]  Nathan I. Croitoru,et al.  Reactive-sputter-deposited TiN films on glass substrates , 1991 .

[4]  G. Siddall,et al.  Handbook of thin film technology: Edited by Leon I. Maissel and Reinhard Glang. Published by McGraw-Hill, Maidenhead, Berks, UK, and New York, N. Y., 1970; ca. 1200 pages. Price £14.15. , 1971 .

[5]  R. M. Bradley,et al.  Theory of thin‐film orientation by ion bombardment during deposition , 1986 .

[6]  Hiroshi Komiyama,et al.  Initial growth and texture formation during reactive magnetron sputtering of TiN on Si(111) , 2002 .

[7]  S. Yalisove,et al.  Growth anisotropy and self-shadowing: A model for the development of in-plane texture during polycrystalline thin-film growth , 1997 .

[8]  D. Srolovitz,et al.  Texture development mechanisms in ion beam assisted deposition , 1998 .

[9]  M. Hong.  Metallic Multilayers and Epitaxy , 1987 .

[10]  Lars Hultman,et al.  Development of preferred orientation in polycrystalline TiN layers grown by ultrahigh vacuum reactive magnetron sputtering , 1995 .

[11]  Andrew G. Glen,et al.  APPL , 2001 .

[12]  Ramesh Chandra,et al.  Influence of the sputtering gas on the preferred orientation of nanocrystalline titanium nitride thin films , 2002 .

[13]  J. Cuomo,et al.  Alignment of thin films by glancing angle ion bombardment during deposition , 1985 .

[14]  K. Chiu,et al.  Texture development in silver films deposited by ionised magnetron sputter deposition , 2000 .