A capacitive humidity sensor integrated with micro heater and ring oscillator circuit fabricated by CMOS–MEMS technique

This study presents the fabrication of a humidity sensor with a micro heater and a ring oscillator circuit using the commercial 0.35 μm complementary metal oxide semiconductor (CMOS) process and a post-process. The micro heater is utilized to provide a super-ambient working temperature to the humidity sensor, which can avoid the humidity sensor to generate the signal drift. The humidity sensor is a capacitive type sensor. The structure of the humidity sensor consists of interdigital electrodes and a sensing film. The sensing film, which is polyimide, is coated on interdigital electrodes. The humidity sensor changes in capacitance when the sensing film absorbs or desorbs water vapor. The ring oscillator circuit is employed to convert the capacitance of the humidity sensor into the oscillation frequency output. Experimental results show that the sensitivity of the humidity sensor is about 25.5 kHz/% RH at 80 °C.

[1]  Geert Brokmann,et al.  Integrated multisensors for industrial humidity measurement , 2001, Conference Documentation International Conference on Multisensor Fusion and Integration for Intelligent Systems. MFI 2001 (Cat. No.01TH8590).

[2]  Sekwang Park,et al.  One-bodied humidity and temperature sensor having advanced linearity at low and high relative humidity range , 2001 .

[3]  C. Dai,et al.  A circular micromirror array fabricated by a maskless post-CMOS process , 2005 .

[4]  R. K. Nahar.  Study of the performance degradation of thin film aluminum oxide sensor at high humidity , 2000 .

[5]  W. Huang,et al.  Improvement of polyimide capacitive humidity sensor by reactive ion etching and novel electrode design , 2002, Proceedings of IEEE Sensors.

[6]  J. Groeneweg,et al.  A bulk micromachined humidity sensor based on porous silicon , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[7]  Hyung-Ki Hong,et al.  A micromachined robust humidity sensor for harsh environment applications , 2001, Technical Digest. MEMS 2001. 14th IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.01CH37090).

[8]  David Galipeau,et al.  A study of low-cost sensors for measuring low relative humidity , 1995 .

[9]  Ying-Zong Juang,et al.  An approach to fabricating microstructures that incorporate circuits using a post-CMOS process , 2005 .

[10]  Jan M. Rabaey,et al.  Digital Integrated Circuits , 2003 .

[11]  Zhen Fang,et al.  Integrated temperature and humidity sensor based MEMS , 2004, International Conference on Information Acquisition, 2004. Proceedings..

[12]  Claude Pellet,et al.  Fast response Humidity Sensors for a Medical Microsystem , 2003 .

[13]  Wolfgang Benecke,et al.  A novel surface-micromachined capacitive porous silicon humidity sensor , 2000 .

[14]  Hao Luo,et al.  A copper CMOS-MEMS Z-axis gyroscope , 2002, Technical Digest. MEMS 2002 IEEE International Conference. Fifteenth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.02CH37266).

[15]  C. Hagleitner,et al.  CMOS MEMS - present and future , 2002, Technical Digest. MEMS 2002 IEEE International Conference. Fifteenth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.02CH37266).

[16]  Lung-Jieh Yang,et al.  A Micromachined Microwave Switch Fabricated by the Complementary Metal Oxide Semiconductor Post-Process of Etching Silicon Dioxide , 2005 .

[17]  Ching-Liang Dai,et al.  Fabrication of Integrated Chip with Microinductors and Micro-Tunable Capacitors by Complementary Metal–Oxide–Semiconductor Postprocess , 2005 .