Deposition temperature effect on sputtered hydroxyapatite coatings prepared on AZ31B alloy substrate

[1]  L. Petrik,et al.  Corrosion Improvement of 304L Stainless Steel by ZrSiN and ZrSi(N,O) Mono- and Double-Layers Prepared by Reactive Cathodic Arc Evaporation , 2021, Coatings.

[2]  C. Tardei,et al.  Biodegradable Mg alloys for orthopedic implants – A review , 2021, Journal of Magnesium and Alloys.

[3]  M. Surmeneva,et al.  Physical principles of radio-frequency magnetron sputter deposition of calcium-phosphate-based coating with tailored properties , 2021 .

[4]  C. Wen,et al.  HA coating on Mg alloys for biomedical applications: A review , 2020 .

[5]  A. Ficai,et al.  Controlling the Degradation Rate of Biodegradable Mg–Zn-Mn Alloys for Orthopedic Applications by Electrophoretic Deposition of Hydroxyapatite Coating , 2020, Materials.

[6]  Yip-Wah Chung,et al.  Commentary on using H/E and H/E as proxies for fracture toughness of hard coatings , 2019, Thin Solid Films.

[7]  M. Surmeneva,et al.  Bone marrow derived mesenchymal stem cell response to the RF magnetron sputter deposited hydroxyapatite coating on AZ91 magnesium alloy , 2019, Materials Chemistry and Physics.

[8]  I. Pană,et al.  Sputtered Si and Mg doped hydroxyapatite for biomedical applications , 2018, Biomedical materials.

[9]  M. Surmeneva,et al.  Influence of the electrolyte’s pH on the properties of electrochemically deposited hydroxyapatite coating on additively manufactured Ti64 alloy , 2017, Scientific Reports.

[10]  M. Matsukawa,et al.  Fabrication of oriented hydroxyapatite film by RF magnetron sputtering , 2017 .

[11]  M. Surmeneva,et al.  Tribological behaviour of RF-magnetron sputter deposited hydroxyapatite coatings in physiological solution , 2017 .

[12]  A. Kiss,et al.  Influence of the annealing treatment on the structure, morphology, and corrosion resistance of sputtered Zr‐Ti‐Si‐O coatings used for biomedical applications , 2017 .

[13]  A. Kiss,et al.  Effect of the deposition temperature on corrosion resistance and biocompatibility of the hydroxyapatite coatings , 2015 .

[14]  S. Dorozhkin.  Calcium orthophosphate deposits: Preparation, properties and biomedical applications. , 2015, Materials science & engineering. C, Materials for biological applications.

[15]  J. Musil.  Flexible hard nanocomposite coatings , 2015 .

[16]  S. Bull,et al.  Nanoindentation in studying mechanical properties of heterogeneous materials , 2015, Journal of Mining Science.

[17]  I. Pană,et al.  Effects of substrate temperature and carbon content on the structure and properties of (CrCuNbTiY)C multicomponent coatings , 2014 .

[18]  M. Noda,et al.  Thermal Stability, Formability, and Mechanical Properties of a High-Strength Rolled Flame-Resistant Magnesium Alloy , 2014 .

[19]  J. Procházka,et al.  Protective over-layer coating preventing cracking of thin films deposited on flexible substrates , 2014 .

[20]  E. Zalnezhad,et al.  Comparative investigation on the adhesion of hydroxyapatite coating on Ti–6Al–4V implant: A review paper , 2014 .

[21]  Jae-Young Jung,et al.  Biodegradability engineering of biodegradable Mg alloys: Tailoring the electrochemical properties and microstructure of constituent phases , 2013, Scientific Reports.

[22]  Sang Mok Lee,et al.  Surface roughness and the corrosion resistance of 21Cr ferritic stainless steel , 2012 .

[23]  J. Musil,et al.  Hard nanocomposite coatings: Thermal stability, oxidation resistance and toughness , 2012 .

[24]  R. Surmenev.  A review of plasma-assisted methods for calcium phosphate-based coatings fabrication , 2012 .

[25]  D. C. Agrawal,et al.  5 – Hydroxyapatite (HA) coatings for biomaterials , 2012 .

[26]  Andrej Atrens,et al.  Corrosion mechanism applicable to biodegradable magnesium implants , 2011 .

[27]  J. Musil,et al.  Properties of nanocrystalline Al–Cu–O films reactively sputtered by DC pulse dual magnetron , 2011 .

[28]  Dingfei Zhang,et al.  Effect of temperature and heating rate on mechanical properties of magnesium alloy AZ31 , 2010 .

[29]  Yang Song,et al.  Research on an Mg-Zn alloy as a degradable biomaterial. , 2010, Acta biomaterialia.

[30]  N. Dahotre,et al.  Calcium phosphate coatings for bio-implant applications: Materials, performance factors, and methodologies , 2009 .

[31]  G. Stan.  Adherent functional graded hydroxylapatite coatings produced by sputtering deposition techniques , 2009 .

[32]  Guang-Ling Song,et al.  Control of biodegradation of biocompatable magnesium alloys , 2007 .

[33]  C. Schuh.  Nanoindentation studies of materials , 2006 .

[34]  Tadashi Kokubo,et al.  How useful is SBF in predicting in vivo bone bioactivity? , 2006, Biomaterials.

[35]  Alexis M Pietak,et al.  Magnesium and its alloys as orthopedic biomaterials: a review. , 2006, Biomaterials.

[36]  Cheong Hoong Diong,et al.  RF plasma sputtering deposition of hydroxyapatite bioceramics : synthesis, performance, and biocompatibility , 2005 .

[37]  P. Schmutz,et al.  Microelectrochemical Studies of Pit Initiation on High Purity and Ultra High Purity Aluminum , 2005 .

[38]  G. O. Hofmann,et al.  Biodegradable implants in traumatology: a review on the state-of-the-art , 2004, Archives of Orthopaedic and Trauma Surgery.

[39]  J. Jacobs,et al.  Metal degradation products: a cause for concern in metal-metal bearings? , 2003, Clinical orthopaedics and related research.

[40]  Shuyan Xu,et al.  Structure, bonding state and in-vitro study of Ca–P–Ti film deposited on Ti6Al4V by RF magnetron sputtering , 2002 .

[41]  G. T. Burstein,et al.  Repetitive Nucleation of Corrosion Pits on Stainless Steel and the Effects of Surface Roughness , 2001 .

[42]  K. Khor,et al.  Influence of processing parameters in the plasma spraying of hydroxyapatite/Ti–6Al–4V composite coatings , 1999 .

[43]  J. Featherstone,et al.  Magnesium-containing carbonate apatites. , 1997, Journal of inorganic biochemistry.

[44]  G. Burstein,et al.  The generation of surface roughness during slurry erosion-corrosion and its effect on the pitting potential , 1996 .

[45]  D. Gabe,et al.  Porosity of Electrodeposited Coatings: Its Cause, Nature, Effect and Management , 1992 .