In the automotive industry, numerous expensive and time-consuming trials are used to “optimize” the ride and handling performance. Ideally, a reliable virtual prototype is a solution. The practical usage of a model is linked and restricted by the model complexity and reliability. The object of this study is development and analysis of a refined quarter car suspension model, which includes the effect of series stiffness, to estimate the response at higher frequencies; resulting Maxwell's model representation does not allow straightforward calculation of performance parameters. Governing equations of motion are manipulated to calculate the effective stiffness and damping values. State space model is arranged in a novel form to find eigenvalues, which is a unique contribution. Analysis shows the influence of suspension damping and series stiffness on natural frequencies and regions of reduced vibration response. Increase in the suspension damping coefficient beyond optimum values was found to reduce the modal damping and increase the natural frequencies. Instead of carrying out trial simulations during performance optimization for human comfort, an expression is developed for corresponding suspension damping coefficient. The analysis clearly shows the influence of the series stiffness on suspension dynamics and necessity to incorporate the model in performance predictions.
[1]
Michael J. Griffin,et al.
Discomfort from feeling vehicle vibration
,
2007
.
[2]
A. N. Thite,et al.
Suspension parameter estimation in the frequency domain using a matrix inversion approach
,
2011
.
[3]
Marc J. Richard,et al.
Safety and comfort analysis of a 3-D vehicle model with optimal non-linear active seat suspension
,
2006
.
[4]
S Duym.
An alternative force state map for shock absorbers
,
1997
.
[5]
T D Gillespie,et al.
Fundamentals of Vehicle Dynamics
,
1992
.
[6]
David Crolla,et al.
The Influence of Damper Properties on Vehicle Dynamic Behaviour
,
2002
.
[7]
Jörnsen Reimpell,et al.
The Automotive Chassis: Engineering Principles
,
1995
.
[8]
Mohamed Bouazara,et al.
An optimization method designed to improve 3-D vehicle comfort and road holding capability through the use of active and semi-active suspensions
,
2001
.