Design of overload vehicle monitoring and response system based on DSP
暂无分享,去创建一个
The overload vehicles are making much more damage to the road surface than the regular ones. Many roads and bridges are equipped with structural health monitoring system (SHM) to provide early-warning to these damage and evaluate the safety of road and bridge. However, because of the complex nature of SHM system, it’s expensive to manufacture, difficult to install and not well-suited for the regular bridges and roads. Based on this application background, this paper designs a compact structural health monitoring system based on DSP, which is highly integrated, low-power, easy to install and inexpensive to manufacture. The designed system is made up of sensor arrays, the charge amplifier module, the DSP processing unit, the alarm system for overload, and the estimate for damage of the road and bridge structure. The signals coming from sensor arrays go through the charge amplifier. DSP processing unit will receive the amplified signals, estimate whether it is an overload signal or not, and convert analog variables into digital ones so that they are compatible with the back-end digital circuit for further processing. The system will also restrict certain vehicles that are overweight, by taking image of the car brand, sending the alarm, and transferring the collected pressure data to remote data center for further monitoring analysis by rain-flow counting method.
[1] Arthur M. B. Braga,et al. Monitoring surface breaking defects with piezoelectric active systems , 2005 .
[2] Alain Berry,et al. The Use of PVDF Strain Sensing in Active Control of Structural Intensity in Beams , 2004 .
[3] Werner Karl Schomburg,et al. Pressure sensor from a PVDF film , 2008 .