论文信息 - Inverse thermal mold design for injection molds

Inverse thermal mold design for injection molds

The thermal mold design and the identification of a proper cooling channel design for injection molds becomes more and more complex. To find a suitable cooling channel system with objective rules based on the local cooling demand of the part a new methodology for the thermal mold design based on an inverse heat transfer problem was introduced. Based on a quality function regarding production efficiency as well as part quality, additional aspects to model the injection molding process are discussed. Aim of those extensions is the improvement of the inverse optimization of the problem.

Christian Hopmann | Philipp Nikoleizig

[1] W. Michaeli,et al. Einführung in die Kunststoffverarbeitung , 2015 .

[2] Yvon Jarny,et al. Optimal cooling design in injection moulding process – A new approach based on morphological surfaces , 2013 .

[3] Hamdy Hassan,et al. Effect of cooling system on the polymer temperature and solidification during injection molding , 2009 .

[4] Karl-Heinz Küfer,et al. Optimal Cooling in Injection Molding and Die Casting , 2008 .

[5] Yvon Jarny,et al. Uniform Cooling and Part Warpage Reduction in Injection Molding Thanks to the Design of an Effective Cooling System , 2013 .

[6] Jörn Mehnen,et al. Evolutionary optimization of mould temperature control strategies: Encoding and solving the multiobjective problem with standard evolution strategy and kit for evolution algorithms , 2004 .

[7] Walter Michaeli,et al. Spritzgießwerkzeuge: Auslegung, Bau, Anwendung , 2007 .

[8] Jalal Faraj,et al. Modeling of the thermal contact resistance time evolution at polymer–mold interface during injection molding: Effect of polymers' solidification , 2015 .