Hearing protection devices (HPD) are commonly used to protect workers exposed to dangerous levels of noise, and their effective attenuation can now be routinely assessed using fit testing system, also known as Field Attenuation Estimation Systems (FAES). FAES typically rely on the use of the Noise Level Reduction Statistics (NRSA), a single number factoring in the attenuation obtained at the seven octave band frequencies from 125 to 8000 Hz, and accounting for the spectrum uncertainty component resulting from different slopes in the HPD attenuation across these frequencies. In the current study, this spectrum uncertainty has been computed from the NIOSH Hearing Protector Device Compendium (NIOSH 2004), a large database of typical laboratory attenuations, for a large number of HPDs (n=340). The spectral uncertainty has been found to range from 0.4 dB to 4.8 dB. The study also includes a detailed spectrum uncertainty budget for the various categories of earplugs (roll-down foam, premolded), semi-inserts and earmuffs. These values could be used as reference values in the upcoming ANSI S12.71 standard on FAES.
[1]
Stephen Bertke,et al.
Trends in worker hearing loss by industry sector, 1981-2010.
,
2015,
American journal of industrial medicine.
[2]
J R Franks,et al.
Development of a new standard laboratory protocol for estimating the field attenuation of hearing protection devices. Part III. The validity of using subject-fit data.
,
1998,
The Journal of the Acoustical Society of America.
[3]
J. Voix.
Hearing protector fit-testing : no two ears are the same
,
2011
.
[4]
T. Morata,et al.
Hearing Impairment Among Noise-Exposed Workers - United States, 2003-2012.
,
2016,
MMWR. Morbidity and mortality weekly report.
[5]
Jérémie Voix,et al.
Individual Fit Testing of Hearing Protection Devices
,
2009,
International journal of occupational safety and ergonomics : JOSE.
[6]
L. Hager.
Fit-testing hearing protectors: an idea whose time has come.
,
2011,
Noise & health.