A review on the deformation mechanism and formability enhancement strategies in incremental sheet forming

[1]  Dongsheng Li,et al.  Fast simulation of incremental sheet metal forming by multi-tooling , 2022, Journal of Manufacturing Processes.

[2]  Shiteng Zhao,et al.  An anomalous compression-induced softening behavior of AA6014-T4P during cyclic loading , 2022, European Journal of Mechanics - A/Solids.

[3]  Dongsheng Li,et al.  Experimental and numerical investigation for sheet thickness thinning in two-point incremental forming (TPIF) , 2022, The International Journal of Advanced Manufacturing Technology.

[4]  Jinglong Li,et al.  Structural characterization of a composite joint prepared during laser welding of Ti–22Al–27Nb intermetallic alloy with an interlayer of Cu-Hf-Ni-Ti-Zr high entropy bulk metallic glass , 2022, Composites Part B: Engineering.

[5]  Wenbin Zhou,et al.  Review on residual stress and its effects on manufacturing of aluminium alloy structural panels with typical multi-processes , 2022, Chinese Journal of Aeronautics.

[6]  Xiaoqing Li,et al.  A review of electrically assisted heat treatment and forming of aluminum alloy sheet , 2022, The International Journal of Advanced Manufacturing Technology.

[7]  Zhengyuan Gao,et al.  A novel current-carrying lubrication in electric hot incremental forming of Ti–6Al–4V titanium sheet , 2022, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

[8]  L. Ben Said.  The incremental sheet forming; technology, modeling and formability: A brief review , 2022, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.

[9]  Yanle Li,et al.  Deformation characteristics and formability enhancement during ultrasonic-assisted multi-stage incremental sheet forming , 2022, Journal of Materials Research and Technology.

[10]  Yanle Li,et al.  A Review on Part Geometric Precision Improvement Strategies in Double-Sided Incremental Forming , 2022, Metals.

[11]  P. Meehan,et al.  Ultrasonic assisted incremental sheet forming: Constitutive modeling and deformation analysis , 2022, Journal of Materials Processing Technology.

[12]  Zhengyuan Gao,et al.  Numerical prediction of Joule heating effect in electric hot incremental sheet forming , 2021, The International Journal of Advanced Manufacturing Technology.

[13]  S. Gatea,et al.  Numerical and experimental investigation of formability in incremental sheet forming of particle-reinforced metal matrix composite sheets , 2021, The International Journal of Advanced Manufacturing Technology.

[14]  Yanle Li,et al.  A toolpath strategy for improving geometric accuracy in double-sided incremental sheet forming , 2021, Chinese Journal of Aeronautics.

[15]  Li Ma,et al.  The effects of through-thickness shear stress on the formability of sheet metal–A review , 2021, Journal of Manufacturing Processes.

[16]  Naif Alharbi.  Experimental study on designing optimal vibration amplitude in ultrasonic assisted incremental forming of AA6061-T6 , 2021, Engineering Science and Technology, an International Journal.

[17]  Jun Chen,et al.  Analytical modeling of fracture strain and experimental validation in incremental sheet forming , 2021 .

[18]  Jun Chen,et al.  Investigations on deformation mechanism of double-sided incremental sheet forming with synchronous thermomechanical steel-aluminum alloy bonding , 2021 .

[19]  X. Chu,et al.  Temperature Influence on Formability and Microstructure of AZ31B during Electric Hot Temperature-Controlled Incremental Forming , 2021, Materials.

[20]  Hongliang Su,et al.  Multi-point die electromagnetic incremental forming for large-sized sheet metals , 2021 .

[21]  A. Xiao,et al.  Electromagnetic partitioning forming and springback control in the fabrication of curved parts , 2021 .

[22]  Hongliang Su,et al.  Formability of AA 2219-O sheet under quasi-static, electromagnetic dynamic, and mechanical dynamic tensile loadings , 2020 .

[23]  Huijuan Ma,et al.  Inhomogeneous deformation behaviors of oblique hole-flanging parts during electromagnetic forming , 2020 .

[24]  Guoqun Zhao,et al.  Investigation on the material flow and deformation behavior during ultrasonic-assisted incremental forming of straight grooves , 2020 .

[25]  H. Long,et al.  Investigating formability enhancement in double side incremental forming by developing a new test method of tension under cyclic bending and compression , 2020 .

[26]  J. Twiefel,et al.  Constitutive modeling and deformation analysis for the ultrasonic-assisted incremental forming process , 2019, The International Journal of Advanced Manufacturing Technology.

[27]  M. J. Mirnia,et al.  Electric hot incremental sheet forming of Ti-6Al-4V titanium, AA6061 aluminum, and DC01 steel sheets , 2019, The International Journal of Advanced Manufacturing Technology.

[28]  H. Long,et al.  A review on material fracture mechanism in incremental sheet forming , 2019, The International Journal of Advanced Manufacturing Technology.

[29]  Parnika Shrivastava,et al.  Microstructure and texture based analysis of forming behavior and deformation mechanism of AA1050 sheet during Single Point Incremental Forming , 2019, Journal of Materials Processing Technology.

[30]  L. Bai,et al.  Influences of Vibration Parameters on Formability of 1060 Aluminum Sheet Processed by Ultrasonic Vibration-Assisted Single Point Incremental Forming , 2019, Advances in Materials Science and Engineering.

[31]  A. Becker,et al.  Double-Sided Incremental Forming: A Review , 2019, Journal of Manufacturing Science and Engineering.

[32]  Hui Liu,et al.  Review on strategies for geometric accuracy improvement in incremental sheet forming , 2019, The International Journal of Advanced Manufacturing Technology.

[33]  Joost Duflou,et al.  Single point incremental forming: state-of-the-art and prospects , 2018 .

[34]  S. Panda,et al.  Single point incremental forming of AA6061 thin sheet: calibration of ductile fracture models incorporating anisotropy and post forming analyses , 2018, International Journal of Material Forming.

[35]  S. Panda,et al.  Single point incremental forming of AA6061 thin sheet: calibration of ductile fracture models incorporating anisotropy and post forming analyses , 2018, International Journal of Material Forming.

[36]  L. Lachmann,et al.  Formability of titanium alloy sheets by friction stir incremental forming , 2018, The International Journal of Advanced Manufacturing Technology.

[37]  Jian Cao,et al.  Deformation mechanics and failure mode in stretch and shrink flanging by double-sided incremental forming , 2018, International Journal of Mechanical Sciences.

[38]  Jianfeng Li,et al.  Effects of process parameters on force reduction and temperature variation during ultrasonic assisted incremental sheet forming process , 2018 .

[39]  A. Basti,et al.  Effects of normal and through-thickness shear stresses on the forming limit curves of AA3104-H19 using advanced yield criteria , 2018 .

[40]  Markus Bambach,et al.  Dominant deformation mechanisms in single point incremental forming (SPIF) and their effect on geometrical accuracy , 2018 .

[41]  P. A. P. Pacheco,et al.  Numerical simulation of electric hot incremental sheet forming of 1050 aluminum with and without preheating , 2018 .

[42]  K. Hsu,et al.  Acoustic energy enabled dynamic recovery in aluminium and its effects on stress evolution and post-deformation microstructure , 2018 .

[43]  Carlos Felipe Guzmán,et al.  Damage prediction in single point incremental forming using an extended Gurson model , 2017, International Journal of Solids and Structures.

[44]  Joost Duflou,et al.  Flexibility in metal forming , 2018 .

[45]  Bernd Kuhlenkötter,et al.  Thermal modeling in electricity assisted incremental sheet forming , 2017 .

[46]  Mei Zhan,et al.  Electromagnetic incremental forming of integral panel under different discharge conditions , 2017 .

[47]  Christian Magnus,et al.  Joule heating of the forming zone in incremental sheet metal forming: Part 1 , 2017 .

[48]  Mohammad Javad Mirnia,et al.  Numerical prediction of failure in single point incremental forming using a phenomenological ductile fracture criterion , 2017 .

[49]  Giuseppe Ingarao,et al.  Single point incremental forming: An assessment of the progress and technology trends from 2005 to 2015 , 2017 .

[50]  Mehdi Vahdati,et al.  Investigation of the ultrasonic vibration effect in incremental sheet metal forming process , 2017 .

[51]  Saeid Amini,et al.  An investigation of conventional and ultrasonic-assisted incremental forming of annealed AA1050 sheet , 2017 .

[52]  H. Long,et al.  Evaluation of deformation stability and fracture mechanism in incremental sheet forming , 2017 .

[53]  T. Obikawa,et al.  Ultrasonic-Assisted Incremental Microforming of Thin Shell Pyramids of Metallic Foil , 2017, Micromachines.

[54]  Fangyi Li,et al.  A review on the recent development of incremental sheet-forming process , 2017 .

[55]  K. Ehmann,et al.  On the Fracture Characterization in Double-Sided Incremental Forming of Ti6Al4V Sheets at Elevated Temperatures , 2017 .

[56]  J. Jeswiet,et al.  Observations on Heat Generated in Single Point Incremental Forming , 2017 .

[57]  Zhou Bo,et al.  Large-scale sheet deformation process by electromagnetic incremental forming combined with stretch forming , 2016 .

[58]  Kornel Ehmann,et al.  An investigation into the mechanics of double-sided incremental forming using finite element methods , 2016 .

[59]  Haiping Yu,et al.  Electromagnetic forming facilitates the transition of deformation mechanism in 5052 aluminum alloy , 2016 .

[60]  Chuansong Wu,et al.  Modified constitutive equation for use in modeling the ultrasonic vibration enhanced friction stir welding process , 2016 .

[61]  J. Yoon,et al.  Stress based prediction of formability and failure in incremental sheet forming , 2016 .

[62]  Jian Cao,et al.  Preliminary investigations on Double Sided Incremental Forming of thermoplastics , 2016 .

[63]  Saeid Amini,et al.  Experimental and numerical investigation of the hot incremental forming of Ti-6Al-4V sheet using electrical current , 2016 .

[64]  Hengan Ou,et al.  Review on the influence of process parameters in incremental sheet forming , 2016 .

[65]  Dongkai Xu,et al.  Enhancement of process capabilities in electrically-assisted double sided incremental forming , 2016 .

[66]  Jian Cao,et al.  A hybrid mixed double-sided incremental forming method for forming Ti6Al4V alloy , 2016 .

[67]  Shuxia Lin,et al.  Experimental investigation on formability and microstructure of AZ31B alloy in electropulse-assisted incremental forming , 2015 .

[68]  Kornel Ehmann,et al.  A Mixed Double-Sided Incremental Forming Toolpath Strategy for Improved Geometric Accuracy , 2015 .

[69]  M. Honarpisheh,et al.  Experimental and numerical investigation of the hot incremental forming of Ti-6Al-4V sheet using electrical current , 2015, The International Journal of Advanced Manufacturing Technology.

[70]  Jianhua Mo,et al.  Investigation of large sheet deformation process in electromagnetic incremental forming , 2015 .

[71]  Dongkai Xu,et al.  Investigation of material deformation mechanism in double side incremental sheet forming , 2015 .

[72]  G. Centeno,et al.  Critical analysis of necking and fracture limit strains and forming forces in single-point incremental forming , 2014 .

[73]  Jian Cao,et al.  Mechanism investigation of friction-related effects in single point incremental forming using a developed oblique roller-ball tool , 2014 .

[74]  B. Lu,et al.  Analytical and experimental investigations on deformation mechanism and fracture behavior in single point incremental forming , 2014 .

[75]  Y. Lin,et al.  Constitutive models for high-temperature flow behaviors of a Ni-based superalloy , 2014 .

[76]  Zixuan Zhang,et al.  A Mixed Toolpath Strategy for Improved Geometric Accuracy and Higher Throughput in Double-Sided Incremental Forming , 2014 .

[77]  Jack Jeswiet,et al.  Single-point incremental forming of 6061-T6 using electrically assisted forming methods , 2014 .

[78]  Guoqiang Fan,et al.  Numerical simulation and experimental investigation to improve the dimensional accuracy in electric hot incremental forming of Ti–6Al–4V titanium sheet , 2014 .

[79]  Jonghun Yoon,et al.  Fracture mechanism of Mg–3Al–1Zn sheet at the biaxial state with respect to forming temperatures , 2014 .

[80]  Kai Zhong,et al.  Electromagnetic incremental forming (EMIF): A novel aluminum alloy sheet and tube forming technology , 2014 .

[81]  Jun Chen,et al.  Effect of Pulse Current on Bending Behavior of Ti6Al4V Alloy , 2014 .

[82]  K. Takashima,et al.  Friction Stir Incremental Forming of A2017 Aluminum Sheets , 2014 .

[83]  Dongkai Xu,et al.  A Comparative Study on Process Potentials for Frictional Stir- and Electric Hot-assisted Incremental Sheet Forming☆ , 2014 .

[84]  Dongkai Xu,et al.  Mechanism investigation for the influence of tool rotation and laser surface texturing (LST) on formability in single point incremental forming , 2013 .

[85]  Georg Bergweiler,et al.  A novel approach for temperature control in ISF supported by laser and resistance heating , 2013 .

[86]  Jian Cao,et al.  Deformation mechanics in single-point and accumulative double-sided incremental forming , 2013 .

[87]  Horst Meier,et al.  Incremental Sheet Metal Forming with Direct Resistance Heating Using Two Moving Tools , 2013 .

[88]  Livan Fratini,et al.  On the improvement of material formability in SPIF operation through tool stirring action , 2013 .

[89]  A. Koesoemadinata,et al.  Predrill Pore-Pressure Prediction Directly From Seismically Derived Acoustic Impedance , 2013 .

[90]  P. Martins,et al.  Two-Point Incremental Forming with Partial Die: Theory and Experimentation , 2013, Journal of Materials Engineering and Performance.

[91]  Qingze Zou,et al.  Acoustic softening and residual hardening in aluminum: Modeling and experiments , 2012 .

[92]  Ted Belytschko,et al.  Mechanics of fracture in single point incremental forming , 2012 .

[93]  Liangchi Zhang,et al.  Constitutive modelling of plasticity of fcc metals under extremely high strain rates , 2012 .

[94]  Francesco Gagliardi,et al.  Formability of lightweight alloys by hot incremental sheet forming , 2012 .

[95]  Dongkai Xu,et al.  Accumulative-DSIF strategy for enhancing process capabilities in incremental forming , 2012 .

[96]  Wesley A. Salandro,et al.  Several Factors Affecting the Electroplastic Effect During an Electrically-Assisted Forming Process , 2011 .

[97]  Jian Cao,et al.  Improvement of Geometric Accuracy in Incremental Forming by Using a Squeezing Toolpath Strategy With Two Forming Tools , 2011 .

[98]  Xin Sun,et al.  Localized amorphism after high-strain-rate deformation in TWIP steel , 2011 .

[99]  C. Bunget,et al.  Influence of ultrasonic vibration on micro-extrusion. , 2011, Ultrasonics.

[100]  Niels Bay,et al.  Failure mechanisms in single-point incremental forming of metals , 2011 .

[101]  A. Tekkaya,et al.  Electromagnetic forming—A review , 2011 .

[102]  Julian M. Allwood,et al.  Design, Analysis and Application of a Novel Test for Sheet Metal Forming Limits under Non-Planar Stress States , 2011 .

[103]  Horst Meier,et al.  Impact of superimposed pressure on dieless incremental sheet metal forming with two moving tools , 2011 .

[104]  M. Fu,et al.  Dynamic recrystallization of the hot isostatically pressed P/M superalloy FGH4096 in hot working process , 2010 .

[105]  John T. Roth,et al.  Formability of Al 5xxx Sheet Metals Using Pulsed Current for Various Heat Treatments , 2010 .

[106]  Guoquan Tong,et al.  Electric hot incremental forming of Ti-6Al-4V titanium sheet , 2010 .

[107]  A. H. van den Boogaard,et al.  The technology of Incremental Sheet Forming¿A brief review of the history , 2010 .

[108]  K. Ravi-Chandar,et al.  On the dynamics of localization and fragmentation-IV. Expansion of Al 6061-O tubes , 2010 .

[109]  Philip Eyckens,et al.  Marciniak–Kuczynski type modelling of the effect of Through-Thickness Shear on the forming limits of sheet metal , 2009 .

[110]  A. H. van den Boogaard,et al.  Incremental forming by continuous bending under tension—An experimental investigation , 2009 .

[111]  Julian M. Allwood,et al.  Generalised forming limit diagrams showing increased forming limits with non-planar stress states , 2009 .

[112]  G. Hussain,et al.  A new formability indicator in single point incremental forming , 2009 .

[113]  Paulo A.F. Martins,et al.  Revisiting single-point incremental forming and formability/failure diagrams by means of finite elements and experimentation , 2009 .

[114]  A. H. van den Boogaard,et al.  An overview of stabilizing deformation mechanisms in incremental sheet forming , 2009 .

[115]  Julian M. Allwood,et al.  The mechanics of incremental sheet forming , 2009 .

[116]  W. C. Emmens,et al.  THE FLC, ENHANCED FORMABILITY, AND INCREMENTAL SHEET FORMING , 2009 .

[117]  Jian Cao,et al.  Experimental and Numerical Analysis of Double Sided Incremental Forming , 2009 .

[118]  Ghulam Hussain,et al.  Electric hot incremental forming: A novel technique , 2008 .

[119]  F. Barlat,et al.  Mechanical behavior of an asymmetrically rolled and annealed 1050-O sheet , 2008 .

[120]  Zequn Zhang,et al.  Formability evaluation of a pure titanium sheet in the cold incremental forming process , 2008 .

[121]  Jong Jin Park,et al.  Formability of magnesium AZ31 sheet in the incremental forming at warm temperature , 2008 .

[122]  Ronald W. Armstrong,et al.  High strain rate properties of metals and alloys , 2008 .

[123]  Niels Bay,et al.  Single‐point incremental forming and formability—failure diagrams , 2008 .

[124]  W. C. Emmens,et al.  Extended tensile testing with simultaneous bending , 2008 .

[125]  Luigino Filice,et al.  Warm incremental forming of magnesium alloy AZ31 , 2008 .

[126]  Paulo A.F. Martins,et al.  Revisiting the fundamentals of single point incremental forming by means of membrane analysis , 2008 .

[127]  N. Venkata Reddy,et al.  Experimental Study on a New Method of Double Side Incremental Forming , 2008 .

[128]  Niels Bay,et al.  Theory of single point incremental forming , 2008 .

[129]  N. Hayat,et al.  The effect of variation in the curvature of part on the formability in incremental forming: An experimental investigation , 2007 .

[130]  J. Allwood,et al.  Incremental Forming of Sandwich Panels , 2007 .

[131]  Markus Bambach,et al.  Experimental and Numerical Analysis of Forming Limits in CNC Incremental Sheet Forming , 2007 .

[132]  John T. Roth,et al.  Metallic Forging Using Electrical Flow as an Alternative to Warm/Hot Working , 2007 .

[133]  Johan Verbert,et al.  Laser Assisted Incremental Forming: Formability and Accuracy Improvement , 2007 .

[134]  George Z. Voyiadjis,et al.  A physically based gradient plasticity theory , 2006 .

[135]  C. Lévi-Strauss,et al.  Experimental investigation , 2013 .

[136]  Joost Duflou,et al.  Asymmetric single point incremental forming of sheet metal , 2005 .

[137]  J Jeswiet,et al.  Wall thickness variations in single-point incremental forming , 2004 .

[138]  F. Micari,et al.  Influence of mechanical properties of the sheet material on formability in single point incremental forming , 2004 .

[139]  F. Blaha,et al.  Dehnung von Zink-Kristallen unter Ultraschalleinwirkung , 2004, Naturwissenschaften.

[140]  M. Tan,et al.  Dynamic continuous recrystallization characteristics in two stage deformation of Mg-3Al-1Zn alloy sheet , 2003 .

[141]  J. J. Park,et al.  Effect of process parameters on formability in incremental forming of sheet metal , 2002 .

[142]  Fabrizio Micari,et al.  Analysis of Material Formability in Incremental Forming , 2002 .

[143]  M. Shim,et al.  The formability of aluminum sheet in incremental forming , 2001 .

[144]  H. Iseki,et al.  An approximate deformation analysis and FEM analysis for the incremental bulging of sheet metal using a spherical roller , 2001 .

[145]  K. Siegert,et al.  Influencing the Friction in Metal Forming Processes by Superimposing Ultrasonic Waves , 2001 .

[146]  H. Conrad.  Electroplasticity in metals and ceramics , 2000 .

[147]  S. Nemat-Nasser,et al.  Mechanical properties and deformation mechanisms of a commercially pure titanium , 1999 .

[148]  H. Mcqueen,et al.  New formula for calculating flow curves from high temperature constitutive data for 300 austenitic steels , 1992 .

[149]  B. Langenecker.  Work-softening of metal crystals by alternating the rate of glide strain , 1961 .

[150]  Oil and Pollution , 1933, Nature.