Design and implementation of a high sensitivity fully integrated passive UHF RFID tag

A fully integrated passive UHF RFID tag complying with the ISO18000-6B protocol is presented, which includes an analog front-end, a baseband processor, and an EEPROM memory. To extend the communication range, a high efficiency differential-drive CMOS rectifier is adopted. A novel high performance voltage limiter is used to provide a stable limiting voltage, with a 172 mV voltage variation against temperature variation and process dispersion. The dynamic band-enhancement technique is used in the regulator circuit to improve the regulating capacity. A rail-to-rail hysteresis comparator is adopted to demodulate the signal correctly in any condition. The whole transponder chip is implemented in a 0.18 μm CMOS process, with a die size of 900 × 800 μm2. Our measurement results show that the total power consumption of the tag chip is only 6.8 μW, with a sensitivity of -13.5 dBm.

[1]  Zhihua Wang,et al.  A low-power RF front-end of passive UHF RFID transponders , 2008, APCCAS 2008 - 2008 IEEE Asia Pacific Conference on Circuits and Systems.

[2]  Yao-Huang Kao,et al.  Study of Front End of CMOS RFID Tag with Inductively-coupled Broadband Antenna , 2007, 2007 Asia-Pacific Microwave Conference.

[3]  Wen Guangjun,et al.  Design of a passive UHF RFID tag for the ISO18000-6C protocol , 2011 .

[4]  G. Iannaccone,et al.  Design criteria for the RF section of UHF and microwave passive RFID transponders , 2005, IEEE Transactions on Microwave Theory and Techniques.

[5]  Siamak Mohammadi,et al.  A dual mode EPC Gen 2 UHF RFID transponder in 0.18μm CMOS , 2008, 2008 15th IEEE International Conference on Electronics, Circuits and Systems.

[6]  D. V. Kerns.  Optimization of the peaking current source , 1986 .

[7]  K. Kotani,et al.  High efficiency CMOS rectifier circuit with self-Vth-cancellation and power regulation functions for UHF RFIDs , 2007, 2007 IEEE Asian Solid-State Circuits Conference.

[8]  Shoucheng Li,et al.  A novel voltage limiter circuit for passive RFID tag , 2012 .

[9]  Shiho Kim,et al.  An EPC Gen 2 compatible passive/semi-active UHF RFID transponder with embedded FeRAM and temperature sensor , 2007, 2007 IEEE Asian Solid-State Circuits Conference.

[10]  Roc Berenguer,et al.  Voltage Sensors for Supply Capacitor in Passive UHF RFID Transponders , 2006, 9th EUROMICRO Conference on Digital System Design (DSD'06).

[11]  Ganesh K. Balachandran,et al.  A 440-nA True Random Number Generator for Passive RFID Tags , 2008, IEEE Transactions on Circuits and Systems I: Regular Papers.

[12]  Yang Xin,et al.  Design and implementation of an ultra-low power passive UHF RFID tag , 2012 .

[13]  Roc Berenguer,et al.  Full Passive UHF Tag With a Temperature Sensor Suitable for Human Body Temperature Monitoring , 2010, IEEE Transactions on Circuits and Systems II: Express Briefs.

[14]  Jin Liu,et al.  A 0.8V 1.52MHz MSVC Relaxation Oscillator with Inverted Mirror Feedback Reference for UHF RFID , 2006, IEEE Custom Integrated Circuits Conference 2006.

[15]  K. Kotani,et al.  Differential-drive CMOS rectifier for UHF RFIDs with 66% PCE at −12 dBm Input , 2008, 2008 IEEE Asian Solid-State Circuits Conference.

[16]  H. Yoshida,et al.  A 950-MHz rectifier circuit for sensor network tags with 10-m distance , 2006, IEEE Journal of Solid-State Circuits.

[17]  D. Yamazaki,et al.  A Passive UHF RF Identification CMOS Tag IC Using Ferroelectric RAM in 0.35-$\mu{\hbox {m}}$ Technology , 2007, IEEE Journal of Solid-State Circuits.