Unmanned Aerial Vehicle Propagation Datalink Tool Based on a Hybrid Multiscale Modeling

This article presents a hybrid computational method to address the datalink characteristics of an Unmanned Aerial Vehicle (UAV) relay. It uses the 3D far-field gain data from the antennas (UAV and ground station), separately computed or based on available measurements as inputs, and then applies the 2-Ray propagation model, taking into consideration the ground permittivity and the respective antenna heights. By doing so, different numerical approaches cover the two different physical scales. Since the installed antennas (i.e. antennas considered placed on the UAV fuselage) performances are considered, a higher reliability can be achieved with the covered procedure, at lower costs when compared to field measurements. Results for different example scenarios are presented and discussed.

[1]  Mohammad S Sharawi,et al.  Design and Implementation of Embedded Printed Antenna Arrays in Small UAV Wing Structures , 2010, IEEE Transactions on Antennas and Propagation.

[2]  T. Weiland,et al.  A practical guide to 3-D simulation , 2008, IEEE Microwave Magazine.

[3]  David W. Matolak,et al.  Channel characterization for unmanned aircraft systems , 2015, 2015 9th European Conference on Antennas and Propagation (EuCAP).

[4]  Christian Bettstetter,et al.  Achieving air-ground communications in 802.11 networks with three-dimensional aerial mobility , 2013, 2013 Proceedings IEEE INFOCOM.

[5]  Sergey Andreev,et al.  Characterization of Radio Links at 60 GHz Using Simple Geometrical and Highly Accurate 3-D Models , 2017, IEEE Transactions on Vehicular Technology.

[6]  William O. Coburn,et al.  Efficient electromagnetic modeling of bent monopole antenna on aircraft wing using FEKO , 2009, 2009 3rd European Conference on Antennas and Propagation.

[7]  E. Leitgeb,et al.  Investigation in Free Space Optical Communication Links Between Unmanned Aerial Vehicles (UAVs) , 2007, 2007 9th International Conference on Transparent Optical Networks.

[8]  Laurent Castanet,et al.  Review of prediction methods for low-elevation aerospace systems and new achievements , 2011, Proceedings of the 5th European Conference on Antennas and Propagation (EUCAP).

[9]  J.-F. Lee,et al.  Modeling EMC/EMI effects of antenna systems on large platforms using multi-solver domain decomposition methods , 2010, Proceedings of the Fourth European Conference on Antennas and Propagation.

[10]  Zhengqing Yun,et al.  Ray Tracing for Radio Propagation Modeling: Principles and Applications , 2015, IEEE Access.

[11]  John L. Volakis,et al.  Fully overlapping domain decomposition method with h-refinement for finite element modeling of small features in large domains , 2011, 2011 IEEE International Symposium on Antennas and Propagation (APSURSI).

[12]  George Papadopoulos,et al.  A Practical RF Propagation Model for Wireless Network Sensors , 2009, 2009 Third International Conference on Sensor Technologies and Applications.

[13]  Zhilu Wu,et al.  Design of Unmanned Aerial Vehicle Space Communication Links based on DS-UWB , 2010 .

[14]  D. Pozar Microwave Engineering , 1990 .

[15]  Pavel Pechac,et al.  A New Propagation Channel Synthesizer for UAVs in the Presence of Tree Canopies , 2017, Remote. Sens..

[16]  Liang Dong,et al.  Performance Analysis of Mobile Ad Hoc Unmanned Aerial Vehicle Communication Networks with Directional Antennas , 2010 .

[17]  Pavel Pechac,et al.  The UAV Low Elevation Propagation Channel in Urban Areas: Statistical Analysis and Time-Series Generator , 2013, IEEE Transactions on Antennas and Propagation.

[18]  William G. Holder Unmanned air vehicles : an illustrated study of UAVs , 2001 .

[19]  Md. Arafatur Rahman,et al.  Enabling drone communications with WiMAX Technology , 2014, IISA 2014, The 5th International Conference on Information, Intelligence, Systems and Applications.

[20]  Abbas Jamalipour,et al.  Wireless communications , 2005, GLOBECOM '05. IEEE Global Telecommunications Conference, 2005..