A hybrid numerical method to develop America’s Cup yacht appendages

A method aimed at the development of an America’s Cup racing yacht bulb is developed and validated against experimental data. The method relies heavily on Reynolds Averaged Navier Stokes computational fluid dynamics (CFD) and also factors in gravitational and aerodynamics effects through the use of a Velocity Prediction Program. Initial extensive use of towing tank results is made to be able to validate the CFD solution and thus develop a solid ground for predictive work. Then, in order to narrow down the focus on bulb developments, decoupled hypotheses are made on the influence of the hull and free surface wave. The development of a detailed performance analysis chart of a known base bulb allows the use of a relatively small series of CFD simulations together with physical hypotheses to assess any given bulb performance relative to the known base. The discussion of the results on a specific development highlights the promises and limitations of the method; final full scale results are discussed and analysed as well.

[1]  Carl Ollivier-Gooch,et al.  A computational study of the effect of unstructured mesh quality on solution efficiency , 1997 .

[2]  M. Drela.  XFOIL: An Analysis and Design System for Low Reynolds Number Airfoils , 1989 .

[3]  P. Spalart.  A One-Equation Turbulence Model for Aerodynamic Flows , 1992 .

[4]  Lars Larsson,et al.  A CFD validation test case - wind tunnel test of a winglet keel , 2006 .

[5]  L. Castillo,et al.  Skin Friction and the Inner Flow in Pressure Gradient Turbulent Boundary Layers , 2006 .

[6]  Brigette Rosendall,et al.  Computational Fluid Dynamics Model for Tacoma Narrows Bridge Upgrade Project , 2003 .

[7]  Michel Fortin,et al.  Certifiable Computational Fluid Dynamics Through Mesh Optimization , 1998 .

[8]  Andy Philpott,et al.  Yacht velocity prediction using mathematical programming , 1993 .

[9]  Jerome H. Milgram,et al.  FLUID MECHANICS FOR SAILING VESSEL DESIGN , 1998 .

[10]  P. Johnson,et al.  Experimental investigation of a simplified 3D high lift configuration in support of CFD validation , 2000 .

[11]  Mark L. Sawley,et al.  Numerical Simulation using RANS-based Tools for America’s Cup Design , 2003 .

[12]  W. George.  Recent Advancements Toward the Understanding of Turbulent Boundary Layers , 2005 .

[13]  Y. Nakayama.  Introduction to fluid mechanics , 1997 .

[14]  T. Hughes,et al.  A new finite element formulation for computational fluid dynamics. X - The compressible Euler and Navier-Stokes equations , 1991 .

[15]  Bruce E. Rosen,et al.  CFD DESIGN STUDIES FOR AMERICA'S CUP 2000 , 2000 .

[16]  P. Sagaut.  Large Eddy Simulation for Incompressible Flows , 2001 .

[17]  T. Hughes,et al.  A new finite element formulation for computational fluid dynamics: II. Beyond SUPG , 1986 .

[18]  Yasuki Nakayama,et al.  History of fluid mechanics , 1998 .

[19]  M. Fortin,et al.  Anisotropic mesh adaptation: towards user‐independent, mesh‐independent and solver‐independent CFD. Part I: general principles , 2000 .