Advancing hyper-crosslinked materials with high efficiency and reusability for oil spill response

[1]  W. Tian,et al.  Hyper-Cross-Linked Polymer-Decorated Surfaces with Ultrahigh Efficiency for Oil/Water Emulsion Separation and Recovery , 2021, ACS applied materials & interfaces.

[2]  Yan Chen,et al.  Highly efficient reusable superhydrophobic sponge prepared by a facile, simple and cost effective biomimetic bonding method for oil absorption , 2021, Scientific Reports.

[3]  A. Hoang,et al.  Sorbent-based devices for the removal of spilled oil from water: a review , 2021, Environmental Science and Pollution Research.

[4]  X. Duan,et al.  Superhydrophobic and superoleophilic membranes for oil-water separation application: A comprehensive review , 2021, Materials & Design.

[5]  Xiaomeng Lv,et al.  Surface Engineering Materials of Superhydrophobic Sponges for Oil/Water Separation: A Review , 2021 .

[6]  P. Cui,et al.  A Review on Oil/Water Mixture Separation Material , 2020, Industrial & Engineering Chemistry Research.

[7]  Phan Van Hung Oil spill response planning tool for estimating the recovery capability of mechanical skimming systems potential , 2020 .

[8]  Ying Li,et al.  Effects of polycyclic aromatic hydrocarbons on the UV-induced fluorescence spectra of crude oil films on the sea surface. , 2019, Marine pollution bulletin.

[9]  Shengyu Feng,et al.  Nonflammable and Magnetic Sponge Decorated with Polydimethylsiloxane Brush for Multitasking and Highly Efficient Oil–Water Separation , 2019, Advanced Functional Materials.

[10]  Jiamin Zhang,et al.  A Robust Cotton Textile-Based Material for High-Flux Oil-Water Separation. , 2019, ACS applied materials & interfaces.

[11]  Z. Cui,et al.  3D superhydrophobic sponge with a novel compression strategy for effective water-in-oil emulsion separation and its separation mechanism , 2019, Chemical Engineering Journal.

[12]  Jiadao Wang,et al.  Separation Mechanism and Construction of Surfaces with Special Wettability for Oil/Water Separation. , 2019, ACS applied materials & interfaces.

[13]  Huiting Shan,et al.  Facile and scalable fabrication of superhydrophobic and superoleophilic PDMS-co-PMHS coating on porous substrates for highly effective oil/water separation , 2019, Chemical Engineering Journal.

[14]  Yuchen Wu,et al.  Superwettability‐Based Interfacial Chemical Reactions , 2018, Advanced materials.

[15]  Jiajun Fu,et al.  Dual-templating synthesis of compressible and superhydrophobic spongy polystyrene for oil capture , 2018, Chemical Engineering Journal.

[16]  H. Tsao,et al.  Stress-Driven Separation of Surfactant-Stabilized Emulsions and Gel Emulsions by Superhydrophobic/Superoleophilic Meshes , 2018, The Journal of Physical Chemistry C.

[17]  H. Guan,et al.  Highly Compressible Wood Sponges with a Spring-like Lamellar Structure as Effective and Reusable Oil Absorbents. , 2018, ACS nano.

[18]  Sam Jarman Oleo sponge' mops up ocean oil spills cleanly , 2018, Physics world.

[19]  H. Woodrow,et al.  : A Review of the , 2018 .

[20]  Jianqiang Wang,et al.  Facile fabrication of nanofiber- and micro/nanosphere-coordinated PVDF membrane with ultrahigh permeability of viscous water-in-oil emulsions , 2018 .

[21]  A. Carpenter Oil pollution in the North Sea: the impact of governance measures on oil pollution over several decades , 2018, Hydrobiologia.

[22]  Zhiguang Guo,et al.  Underoil superhydrophilic surfaces: water adsorption in metal–organic frameworks , 2018 .

[23]  Yunlin Liu,et al.  Recyclable and biodegradable superhydrophobic and superoleophilic chitosan sponge for the effective removal of oily pollutants from water , 2017 .

[24]  Chul B. Park,et al.  Acid-Base Polymeric Foams for the Adsorption of Micro-oil Droplets from Industrial Effluents. , 2017, Environmental science & technology.

[25]  Na Liu,et al.  Superwetting Porous Materials for Wastewater Treatment: from Immiscible Oil/Water Mixture to Emulsion Separation , 2017 .

[26]  Cunming Yu,et al.  Facile Preparation of the Porous PDMS Oil‐Absorbent for Oil/Water Separation , 2017 .

[27]  Jin Ge,et al.  Advanced Sorbents for Oil‐Spill Cleanup: Recent Advances and Future Perspectives , 2016, Advanced materials.

[28]  T. Collier,et al.  Environmental effects of the Deepwater Horizon oil spill: A review. , 2016, Marine pollution bulletin.

[29]  Xuhong Guo,et al.  A facile approach for preparation of underwater superoleophobicity cellulose/chitosan composite aerogel for oil/water separation , 2016 .

[30]  Shuhong Yu,et al.  Coating sponge with a hydrophobic porous coordination polymer containing a low-energy CF3-decorated surface for continuous pumping recovery of an oil spill from water , 2016 .

[31]  Ziyad Tariq Muhseen,et al.  The aromatic stacking interactions between proteins and their macromolecular ligands. , 2015, Current protein and peptide science.

[32]  Jie Zhu,et al.  Superelastic and superhydrophobic nanofiber-assembled cellular aerogels for effective separation of oil/water emulsions. , 2015, ACS nano.

[33]  B. Smit,et al.  Water adsorption in metal–organic frameworks with open‐metal sites , 2015 .

[34]  Lei Jiang,et al.  Special wettable materials for oil/water separation , 2014 .

[35]  J. Bugden,et al.  Application of ultraviolet fluorometry and excitation-emission matrix spectroscopy (EEMS) to fingerprint oil and chemically dispersed oil in seawater. , 2008, Marine pollution bulletin.

[36]  Tony Travers,et al.  A Comprehensive Review , 1998 .