A Series Stacked IGBT Switch Based on a Concentrated Clamp Mode Snubber for Pulsed Power Applications
暂无分享,去创建一个
[1] Fan Zhang,et al. A Hybrid Active Gate Drive for Switching Loss Reduction and Voltage Balancing of Series-Connected IGBTs , 2017, IEEE Transactions on Power Electronics.
[2] Hong-Je Ryoo,et al. Simplified Design of a Solid State Pulsed Power Modulator Based on Power Cell Structure , 2018, IEEE Transactions on Industrial Electronics.
[3] Hyoung-Suk Kim,et al. Gate Driving Circuit With Active Pull-Down Function for a Solid-State Pulsed Power Modulator , 2018, IEEE Transactions on Power Electronics.
[4] I. Baraia,et al. An Experimentally Verified Active Gate Control Method for the Series Connection of IGBT/Diodes , 2012, IEEE Transactions on Power Electronics.
[5] Frede Blaabjerg,et al. Investigation and Classification of Short-Circuit Failure Modes Based on Three-Dimensional Safe Operating Area for High-Power IGBT Modules , 2018, IEEE Transactions on Power Electronics.
[6] Shahriyar Kaboli,et al. A Fast and Series-Stacked IGBT Switch With Balanced Voltage Sharing for Pulsed Power Applications , 2016, IEEE Transactions on Plasma Science.
[7] Chengxiang Li,et al. A Modular Generator of Nanosecond Pulses With Adjustable Polarity and High Repetition Rate , 2018, IEEE Transactions on Power Electronics.
[8] Mostafa Zarghany,et al. A Series Stacked IGBT Switch With Robustness Against Short-Circuit Fault for Pulsed Power Applications , 2018, IEEE Transactions on Power Electronics.
[9] G. Diaz,et al. Elevated Concentration of Nitrate Ions in Water Through Direct Treatment by Dielectric Barrier Discharge , 2017, IEEE Transactions on Plasma Science.
[10] Jerry L. Hudgins,et al. Modeling of IGBT resistive and inductive turn-on behavior , 2005 .
[11] Y. Lau,et al. Pulse-shortening in recirculating planar magnetrons , 2017, 2017 Eighteenth International Vacuum Electronics Conference (IVEC).
[12] K. Yoshida,et al. STATCOM applying flat-packaged IGBTs connected in series , 2005, IEEE Transactions on Power Electronics.
[13] A. Welleman,et al. Compact High Voltage IGBT Switch for Pulsed Power Applications , 2008, 2008 14th Symposium on Electromagnetic Launch Technology.
[14] E. Santi,et al. Modeling of IGBT Resistive and Inductive Turn-On Behavior , 2005, IEEE Transactions on Industry Applications.
[15] Ahmed M. Massoud,et al. A Unipolar/Bipolar High-Voltage Pulse Generator Based on Positive and Negative Buck–Boost DC–DC Converters Operating in Discontinuous Conduction Mode , 2017, IEEE Transactions on Industrial Electronics.
[16] A. Piazzesi,et al. Suitability and optimization of high-voltage IGBTs for series connection with active voltage clamping , 2005, IEEE Transactions on Power Electronics.
[17] J. Roth-Stielow,et al. Pulsed voltage converter with bipolar output voltages up to 10 kV for Dielectric Barrier Discharge , 2011, 8th International Conference on Power Electronics - ECCE Asia.
[18] Zhengming Zhao,et al. Active Clamping Circuit With Status Feedback for Series-Connected HV-IGBTs , 2014, IEEE Transactions on Industry Applications.
[19] Mostafa Zarghany,et al. A High-Voltage Pulse Generator With Continuously Variable Pulsewidth Based on a Modified PFN , 2017, IEEE Transactions on Plasma Science.
[20] Fan Zhang,et al. Advanced Active Gate Drive for Switching Performance Improvement and Overvoltage Protection of High-Power IGBTs , 2018, IEEE Transactions on Power Electronics.
[21] Edl Schamiloglu,et al. A Cascaded Microsecond-Pulse Generator for Discharge Applications , 2014, IEEE Transactions on Plasma Science.
[22] Mohammad Rezanejad,et al. A Bipolar High-Voltage Pulsed-Power Supply Based on Capacitor-Switch Voltage Multiplier , 2016, IEEE Transactions on Plasma Science.
[23] Ahmed M. Massoud,et al. A Modular High-Voltage Pulse-Generator With Sequential Charging for Water Treatment Applications , 2016, IEEE Transactions on Industrial Electronics.
[24] Malay Trivedi,et al. Modeling the turn-off of IGBT's in hard- and soft-switching applications , 1997 .
[25] Fan Zhang,et al. Voltage balancing optimization of series-connected IGBTs in solid-state breaker by using driving signal adjustment technique , 2015, 2015 IEEE 2nd International Future Energy Electronics Conference (IFEEC).
[26] Zhengming Zhao,et al. Series-Connected HV-IGBTs Using Active Voltage Balancing Control With Status Feedback Circuit , 2015, IEEE Transactions on Power Electronics.
[27] Jin Zhang,et al. Physical Investigation Into Effective Voltage Balancing by Temporary Clamp Technique for the Series Connection of IGBTs , 2018, IEEE Transactions on Power Electronics.
[28] C. Mark Johnson,et al. Design Optimization of Quasi-Active Gate Control for Series-Connected Power Devices , 2014, IEEE Transactions on Power Electronics.
[29] Dominik Bortis,et al. Transient Behavior of Solid-State Modulators With Matrix Transformers , 2010, IEEE Transactions on Plasma Science.
[30] S. J. Finney,et al. Active Snubber Energy Recovery Circuit for Series-Connected IGBTs , 2011, IEEE Transactions on Power Electronics.
[31] S. J. Finney,et al. Series-Connected IGBTs Using Active Voltage Control Technique , 2013, IEEE Transactions on Power Electronics.
[32] Patrick R. Palmer,et al. The series connection of IGBTs with active voltage sharing , 1997 .
[33] R. Kumar,et al. 200 kJ Pulsed Power System for Pulsed Plasma Device , 2017, IEEE Transactions on Plasma Science.
[34] Abdolreza Sheikholeslami,et al. A New Modular Bipolar High-Voltage Pulse Generator , 2017, IEEE Transactions on Industrial Electronics.