Theoretical and experimental analysis of asymmetric sandwich structures

A new technology known as asymmetric sandwich structures is now used for the design of lightweight structures. Static failure tests demonstrate the high performance of this technology and show its original mechanical behavior. Due to this complex mechanical behavior, the use of non-linear finite element models in the pre-project phase is a long, expensive process. This paper presents a specific theory which enables faster design loops. The theory is first validated by comparison to numerical models and is then used to correlate structural tests on asymmetric sandwich plate under combined compression/shear loadings. The tests were conducted on original test equipment designed to investigate the capabilities of this technology.

[1]  E. H. Hooper.  III. Le Starship : un modèle pour les avions futurs , 1989 .

[2]  Tarun Kant,et al.  New theories for symmetric/unsymmetric composite and sandwich beams with C0 finite elements , 1993 .

[3]  Anthony J. Vizzini,et al.  Failure of Sandwich to Laminate Tapered Composite Structures , 1995 .

[4]  G. Zagaĭnov,et al.  Composite materials in aerospace design , 1996 .

[5]  Chai Gin-Boay,et al.  Stress distribution in sandwich beams under tension , 1999 .

[6]  Serge Abrate,et al.  Localized Impact on Sandwich Structures With Laminated Facings , 1997 .

[7]  Yeoshua Frostig,et al.  High-order bending of piecewise uniform sandwich beams with a tapered transition zone and a transversely flexible core , 1995 .

[8]  Cv Clemens Verhoosel,et al.  Non-Linear Finite Element Analysis of Solids and Structures , 1991 .

[9]  Comparison of Three Shear-Deformation Theories in the Non-Linear Analysis of Sandwich Shell Elements , 1998 .

[10]  Roger W Peters.  Buckling tests of flat rectangular plates under combined shear and longitudinal compression , 1948 .

[11]  A. Vautrin.  Mechanics of Sandwich Structures , 1998 .

[12]  K. H. Lee,et al.  Static response of unsymmetric sandwich beams using an improved zig-zag model , 1993 .

[13]  R. D. Mindlin,et al.  Influence of rotary inertia and shear on flexural motions of isotropic, elastic plates , 1951 .

[14]  H. Saunders,et al.  Finite element procedures in engineering analysis , 1982 .

[15]  Gary L. Farley,et al.  In-plane shear test of thin panels , 1983 .

[16]  I. U. Ojalvo.  Departures from classical beam theory in laminated, sandwich, and short beams , 1977 .

[17]  Bruno Castanié,et al.  Contribution à l'étude des structures sandwichs dissymétriques , 2000 .

[18]  Tarun Kant,et al.  A critical review and some results of recently developed refined theories of fiber-reinforced laminated composites and sandwiches , 1993 .

[19]  Ahmed K. Noor,et al.  Computational Models for Sandwich Panels and Shells , 1996 .

[20]  R. E. Brown,et al.  On the use of polynomial series with the Rayleigh-Ritz method , 1997 .

[21]  Bill Baron,et al.  Robust composite sandwich structures , 1998 .

[22]  Ole Thybo Thomsen,et al.  Sandwich Plates with "Through-the-Thickness" and "Fully-Potted" inserts: Evaluation of Differences in Structural Performance , 1997 .

[23]  John Dugundji,et al.  Postbuckling behavior of laminated plates using a direct energy-minimization technique , 1989 .

[24]  D. Zenkert,et al.  Handbook of Sandwich Construction , 1997 .