Coupled cooling method and application of latent heat thermal energy storage combined with pre-cooling of envelope: Sensitivity analysis and optimization

Abstract Cooling system for mine refuge chamber provides comfortable environment for miners to avoid heat damage. The existing cooling systems have their own application scopes and limitations. The coupled cooling method of Latent Heat Thermal Energy Storage (LHTES) combined with pre-cooling of envelope (PE) is a new free cooling method which is suitable for high-temperature, passive, impact and other harsh environment. Then, to improve the thermal comfort and reduce energy consumption, the effect of the pre-cooling temperature, melting temperature of PCM, aspect ratio and amounts of PCM unit on the indoor temperature are investigated in a systematic manner. Furthermore, the system is optimized and the generalized results for the evaluation parameter are given. Analysis of the results may lead to following main conclusions: (i) the method really controls the indoor temperature and the saving amount of PCM is more than 50% compared to the traditional LHTES systems; (ii) the temperature control (TC) performance of PCM would drop significantly if it melts more than 80%; (iii) under current operating conditions, the optimal melting temperature is about 29 °C and the aspect ratio of PCM unit is 60:500; (iv) per 1 °C the pre-cooling temperature dropped, 19% the actual amount of PCM decreased for the case studied.

[1]  Tanongkiat Kiatsiriroat,et al.  Energy reduction of building air-conditioner with phase change material in Thailand , 2014 .

[2]  Yanping Yuan,et al.  Effects of number and layout of air purification devices in mine refuge chamber , 2017 .

[3]  Kunping Lin,et al.  Thermal analysis of a direct-gain room with shape-stabilized PCM plates , 2008 .

[4]  Yanping Yuan,et al.  Effect of installation angle of fins on melting characteristics of annular unit for latent heat thermal energy storage , 2016 .

[5]  Luisa F. Cabeza,et al.  Numerical study on the thermal performance of a ventilated facade with PCM , 2013 .

[6]  Savvas A. Tassou,et al.  Effectiveness of CFD simulation for the performance prediction of phase change building boards in the thermal environment control of indoor spaces , 2013 .

[7]  Xiangfei Kong,et al.  Numerical study on the thermal performance of building wall and roof incorporating phase change material panel for passive cooling application , 2014 .

[8]  Liangliang Sun,et al.  Coupled cooling method and application of latent heat thermal energy storage combined with pre-cooling of envelope: Method and model development , 2017 .

[9]  Miguel Azenha,et al.  Thermal behavior of cement based plastering mortar containing hybrid microencapsulated phase change materials , 2014 .

[10]  Adélio Rodrigues Gaspar,et al.  Modeling and parametric analysis of an adsorber unit for thermal energy storage , 2016 .

[11]  John L. Wilson,et al.  Thermal performance of buildings integrated with phase change materials to reduce heat stress risks during extreme heatwave events , 2017 .

[12]  Xiaoling Cao,et al.  Experimental investigation on Influencing Factors of air curtain systems barrier efficiency for mine refuge chamber , 2016 .

[13]  Joseph Virgone,et al.  Modeling and simulation of a phase change material system for improving summer comfort in domestic residence , 2015 .

[14]  Brent R. Young,et al.  Peak Load Shifting with Energy Storage and Price-Based Control System , 2015, Thermal Energy Storage with Phase Change Materials.

[15]  Ming-bo Piao,et al.  Status quo and prospect of the development for underground coal mine refuge chamber , 2013 .

[16]  Behrouz Mohammad Kari,et al.  Cooling load reduction in office buildings of hot-arid climate, combining phase change materials and night purge ventilation , 2016 .

[17]  Hao Peng,et al.  Thermal investigation of PCM-based high temperature thermal energy storage in packed bed , 2014 .

[18]  Ashish Shukla,et al.  Experimental study on the thermal performance of air-PCM unit , 2016 .

[19]  Yimin Xiao,et al.  Calculation of transient heat transfer through the envelope of an underground cavern using Z-transfer coefficient method , 2012 .

[20]  Ya-Ling He,et al.  Parameter effect of a phase change thermal energy storage unit with one shell and one finned tube on its energy efficiency ratio and heat storage rate , 2016 .

[21]  Laurent Pilon,et al.  Annual energy analysis of concrete containing phase change materials for building envelopes , 2015 .

[22]  Bing Wu,et al.  Experimental Study of Phase Change Material's Application in Refuge Chamber of Coal Mine , 2012 .