The design and development of a mirco-force sensing device

An advancing micro-force sensing device that can measure force in the range of sub-micro-Newton (muN) is designed and realized in this paper. To accurately measure the micro interactive force (For example, adhesion, surface tension, friction, and assembly force) between the tool and the object during micromanipulation, the polyvinylidene fluoride (PVDF) is used to fabricate a highly sensitive force sensing device. In this paper, the relationship model of the interactive force and the charge generated on the PVDF surface, the design of the signal processing method of PVDF output are illustrated. The transformation model between the micro interactive force and the signal of the sensing device is built. A new calibration method of the sensing device is presented. Experiment results verify the accuracy of the sensing device's transformation model, the effectiveness of the signal processing method. The results also show the sub-muN sensitivity of the sensing device. The micro-force sensing technology developed in this paper will promote the efficiency, and decrease the cost of micromanipulation and microassembly.

[1]  Victor M. Bright,et al.  Automated assembly of flip-up micromirrors , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[2]  Ronald S. Fearing,et al.  Alignment of microparts using force-controlled pushing , 1998, Other Conferences.

[3]  Kenneth A. Goldberg,et al.  Microassembly technologies for MEMS , 1998, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[4]  Ronald S. Fearing,et al.  Automating microassembly with ortho-tweezers and force sensing , 2001, Proceedings 2001 IEEE/RSJ International Conference on Intelligent Robots and Systems. Expanding the Societal Role of Robotics in the the Next Millennium (Cat. No.01CH37180).

[5]  S. Koelemijer Chollet,et al.  Cost effective micro-system assembly automation , 1999, 1999 7th IEEE International Conference on Emerging Technologies and Factory Automation. Proceedings ETFA '99 (Cat. No.99TH8467).

[6]  Silvestro Micera,et al.  Towards a force-controlled microgripper for assembling biomedical microdevices , 2000 .

[7]  Randall D. Peters.  Symmetric differential capacitive pressure sensor , 1993 .

[8]  Joël Abadie,et al.  Passive diamagnetic levitation: theoretical foundations and application to the design of a micro-nano force sensor , 2003, Proceedings 2003 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2003) (Cat. No.03CH37453).

[9]  Mehdi Boukallel,et al.  Micromanipulation tasks using passive levitated force sensing manipulator , 2003, Proceedings 2003 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2003) (Cat. No.03CH37453).

[10]  Sergej Fatikow,et al.  A Flexible Microrobot-Based Microassembly Station , 2000, J. Intell. Robotic Syst..

[11]  Rajesh Rajamani,et al.  Actively servoed multi-axis microforce sensors , 2003, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422).

[12]  Yu Zhou,et al.  Sensor-based microassembly of hybrid MEMS devices , 1998 .