Additives in Polymers

Abstract The role of additives in commodity and specialty polymeric artifacts is of key importance since pure polymers often show poor resistance to external factors (such as weathering, mechanical stress, etc.) during their processing or end-use application. This chapter provides a technical overview of the most important classes of polymer additives that can ensure protection against weathering agents (UV radiation, oxygen), resistance to heat or flames, and improvement of physical and mechanical properties, particularly plasticization and impact resistance. Compatibilization of polymer blends is also discussed due to its importance in recycling of plastic materials. Since esthetic appearance of finished products is of great concern, different coloring technologies are also reported herein, ranging from standard to “special effect” formulations. In the final section a remark on bio-based additives is provided, to account for the social and technological push toward biopolymers and all bio-based formulations. For a complete insight on this topic, for each class of polymer additives a wide range of commercially available products is provided together with their supplier names and main applications in polymer formulations.

[1]  P. Haddad,et al.  3 – Gas Chromatography , 1994 .

[2]  F. Maile,et al.  Effect pigments—past, present and future , 2005 .

[3]  J. R. Lyerla.  4. High-Resolution Nuclear Magnetic Resonance Spectroscopy , 1980 .

[4]  Thomas E Marlin,et al.  Process Control , 1995 .

[5]  Z. Hao,et al.  Some aspects of organic pigments , 1997 .

[6]  H. Kjaergaard,et al.  Autoxidation of Organic Compounds in the Atmosphere , 2013 .

[7]  Bo Hu,et al.  Liquid‐Liquid Extraction (LLE) , 2013 .

[8]  W. A. Shewhart,et al.  Quality control , 1927 .

[9]  Robert Jérôme,et al.  Strategies for compatibilization of polymer blends , 1998 .

[10]  S. Bigger,et al.  The effects of pigments on the photostability of polyethylene , 1989 .

[11]  C. Pourzand,et al.  Towards multifunctional antioxidants: synthesis, electrochemistry, in vitro and cell culture evaluation of compounds with ligand/catalytic properties. , 2005, Organic & biomolecular chemistry.

[12]  Volker Mersch-Sundermann,et al.  Phthalates: toxicology and exposure. , 2007, International journal of hygiene and environmental health.

[13]  Robert Michael Christie.  Pigments, dyes and fluorescent brightening agents for plastics : an overview , 1994 .

[14]  T. Wampler.  Applied pyrolysis handbook , 2006 .

[15]  J. Pospíšil.  Chemical and photochemical behaviour of phenolic antioxidants in polymer stabilization: A state of the art report, part II , 1993 .

[16]  G. Santagata,et al.  Natural Polymers and Additives in Commodity and Specialty Applications: A Challenge for the Chemistry of Future , 2014 .

[17]  H. Heller.  Protection of polymers against light irradiation , 1969 .

[18]  L. Donaldson,et al.  Polymeric flavonoids processed with co-polymers as UV and thermal stabilisers for polyethylene films , 2015 .

[19]  C. Pohl.  8 - Ion Chromatography , 2005 .

[20]  William Black.  3 – Extraction methods , 2000 .

[21]  Giovanna Di Pasquale,et al.  A study on chemical modifications, mechanical properties and surface photo-oxidation of films of polystyrene (PS) stabilised by hindered amines (HAS) , 2004 .

[22]  C. A. Wit.  An overview of brominated flame retardants in the environment. , 2002 .

[23]  Lars Jarup,et al.  Hazards of heavy metal contamination. , 2003 .

[24]  Qian Xu,et al.  Analysis of phthalate migration from plastic containers to packaged cooking oil and mineral water. , 2010, Journal of agricultural and food chemistry.

[25]  Lawrence A. Johnson,et al.  Biobased Products from Soybeans , 2008 .

[26]  Jeffrey W. Gilman,et al.  An overview of flame retardancy of polymeric materials: application, technology, and future directions , 2013 .

[27]  S. Johansson,et al.  Particle-induced X-ray Emission Spectrometry , 2001 .

[28]  M. Malinconico,et al.  Natural antioxidants for polypropylene stabilization , 2011 .

[29]  E. Björklund,et al.  Determination of banned azo dyes in consumer goods , 2005 .

[30]  M. Coote,et al.  Clarifying the Mechanism of the Denisov Cycle: How do Hindered Amine Light Stabilizers Protect Polymer Coatings from Photo-oxidative Degradation? , 2010 .

[31]  J. Qu,et al.  Mechanical and rheological properties of epoxidized soybean oil plasticized poly(lactic acid) , 2009 .

[32]  D. Pratt,et al.  Advances in radical-trapping antioxidant chemistry in the 21st century: a kinetics and mechanisms perspective. , 2014, Chemical reviews.

[33]  Robert D. Morrison,et al.  12 – Chlorinated Solvents , 1964 .

[34]  V. Mitchell,et al.  Mutagenicity of benzidine and benzidine-congener dyes and selected monoazo dyes in a modified Salmonella assay. , 1984, Mutation research.

[35]  J. Rabek,et al.  Photo-stabilising effect of Ni compounds in photo-oxidative degradation of cis-1,4-poly(butadiene) , 1981 .

[36]  Jan-Chan Huang,et al.  Carbon black filled conducting polymers and polymer blends , 2002 .

[37]  G. Berry,et al.  3 – Polymer Solutions , 1989 .

[38]  S. Bocchini,et al.  Plasticizers, antioxidants and reinforcement fillers from hazelnut skin and cocoa by-products: extraction and use in PLA and PP , 2014 .

[39]  K. Figge,et al.  Polyvinyl chloride and its organotin stabilizers with special reference to packaging materials and commodities: A review , 1990 .

[40]  S. Levchik,et al.  A Review of Recent Progress in Phosphorus-based Flame Retardants , 2006 .

[41]  J. Rabek,et al.  Polymer Photodegradation: Mechanisms and experimental methods , 2012 .

[42]  Marina Patricia Arrieta,et al.  Ternary PLA–PHB–Limonene blends intended for biodegradable food packaging applications , 2014 .

[43]  G. George.  The mechanism of photoprotection of polystyrene film by some ultraviolet absorbers , 1974 .

[44]  T. Mekonnen,et al.  Progress in bio-based plastics and plasticizing modifications , 2013 .

[45]  J. Lee,et al.  Functional MBS impact modifiers for PC/PBT alloy , 2000 .

[46]  J. Bolland.  Kinetics of olefin oxidation , 1949 .

[47]  Andreas Hornung,et al.  Kinetic study on the thermal degradation of polypropylene and polyethylene , 1999 .

[48]  Ulrike Diebold,et al.  The surface science of titanium dioxide , 2003 .

[49]  Mary Ann Curran,et al.  Life-cycle analysis , 1992 .

[50]  Pål Börjesson,et al.  Industrial biotechnology for the production of bio-based chemicals--a cradle-to-grave perspective. , 2007, Trends in biotechnology.

[51]  D. Carlsson,et al.  Photostabilisation mechanisms in polymers: A review , 1980 .

[52]  E. Yousif,et al.  Photodegradation and photostabilization of polymers, especially polystyrene: review , 2013, SpringerPlus.

[53]  H. Ritter,et al.  Polymers and Dyes: Developments and Applications , 2015 .

[54]  F. Ingo,et al.  High Pressures , 1942, Science.

[55]  G. Zaikov,et al.  Influence of synergists: The influence of hydroperoxide decomposers on phenolic inhibitors consumption in oxidized polypropylene , 2002 .