论文信息 - Three dimensional numerical modelling of a NATM tunnel

Three dimensional numerical modelling of a NATM tunnel

The design of NATM tunnels are often done in two dimensions, even though there are limitations. This paper uses the results from the simulation of a NATM tunnel using finite element method in three dimensions to illustrate a few observations that may aid in practical designs. These observations are three dimensional effects, which will not be apparent in two dimensional analyses. The finite element model was based on the construction of Fort Canning Tunnel, Singapore, which is an approximately 15m wide vehicular tunnel that has been constructed using NATM with applications of steel pipe umbrella method.

[1] N. Kotake,et al. Design for umbrella method based on numerical analyses and field measurements , 1995 .

[2] A. Guenot,et al. Analysis of convergence behind the face of a tunnel : Tunnelling 82, proceedings of the 3rd international symposium, Brighton, 7–11 June 1982, P197–204. Publ London: IMM, 1982 , 1983 .

[3] R. K. Rowe,et al. An evaluation of simplified techniques for estimating three-dimensional undrained ground movements due to tunnelling in soft soils , 1992 .

[4] R. J. Fowell,et al. EFFECTS OF DIFFERENT TUNNEL FACE ADVANCE EXCAVATION ON THE SETTLEMENT BY FEM , 2003 .

[5] M. Yazdchi,et al. 3D modelling of sprayed-concrete-lined tunnels in clay , 2006 .

[6] V. Choa,et al. Underground cavern development in the Jurong sedimentary rock formation , 1999 .

[7] Bolton,et al. Numerical modelling of a NATM tunnel construction in London clay , 1996 .

[8] T. W. Lambe,et al. Predictions in soil engineering , 1973 .

[9] M. Karakus,et al. Back analysis for tunnelling induced ground movements and stress redistribution , 2005 .

[10] Charles Wang Wai Ng,et al. Three-dimensional numerical investigations of new Austrian tunnelling method (NATM) twin tunnel interactions , 2004 .