Kinematic analysis of a 5-RSP parallel mechanism with centralized motion

The paper presents a kinematic analysis of a parallel mechanism, referred to here as a mechanism with centralized motion. The paper includes a proof, based on the geometry of the mechanism, that the platform exhibits centralized motion. An interesting feature of this parallel mechanism is that it is partially collapsible which may be beneficial in practical applications where storage space is limited. The platform is connected to a base, regarded as fixed in this paper, by five identical legs where each leg is a three-link chain connected by a revolute joint, a spherical joint, and a prismatic joint. The result is that the platform has a screw motion about an axis which is perpendicular to the base and passes through the centroids of the base and the platform, for all positions of the platform. The pitch of the instantaneous screw depends on the platform assembly configuration and is a function of the platform position and orientation. To complete the kinematic study, the paper includes closed-form solutions to the inverse and forward position and velocity problems. Finally, the paper includes several numerical examples to illustrate some of the key features of this novel parallel mechanism.

[1]  Clément Gosselin,et al.  Singularity analysis of closed-loop kinematic chains , 1990, IEEE Trans. Robotics Autom..

[2]  R. Clavel,et al.  A Fast Robot with Parallel Geometry , 1988 .

[3]  D. Stewart.  A Platform with Six Degrees of Freedom , 1965 .

[4]  Offer Shai,et al.  Extension of Graph Theory to the Duality Between Static Systems and Mechanisms , 2006 .

[5]  C. Gosselin,et al.  Kinematic Analysis and Singularity Loci of Spatial Four-Degree-of-Freedom Parallel Manipulators Using a Vector Formulation , 1998 .

[6]  Kenneth J. Waldron,et al.  Kinematics of a Hybrid Series-Parallel Manipulation System , 1989 .

[7]  M. Callegari,et al.  Kinematic Analysis of a Novel Translational Platform , 2003 .

[8]  Jian S. Dai,et al.  From Origami to a New Class of Centralized 3-DOF Parallel Mechanisms , 2007 .

[9]  K. H. Hunt,et al.  Structural Kinematics of In-Parallel-Actuated Robot-Arms , 1983 .

[10]  L. D. Aguilera,et al.  A More General Mobility Criterion for Parallel Platforms , 2004 .

[11]  D. Caldwell,et al.  Geometry and Kinematic Analysis of a Redundantly Actuated Parallel Mechanism That Eliminates Singularities and Improves Dexterity , 2008 .

[12]  Yuefa Fang,et al.  Structure synthesis of a class of 3-DOF rotational parallel manipulators , 2004, IEEE Transactions on Robotics and Automation.

[13]  H. Lipkin,et al.  Mobility of Overconstrained Parallel Mechanisms , 2006 .

[14]  L. Tsai.  Solving the Inverse Dynamics of a Stewart-Gough Manipulator by the Principle of Virtual Work , 2000 .

[15]  Gordon R. Pennock,et al.  Algebraic-geometric properties of the coupler curves of the RCCC spatial four-bar mechanism , 2000 .

[16]  Jean-Pierre Merlet,et al.  Parallel Robots , 2000 .

[17]  Vijay Kumar,et al.  Characterization of Workspaces of Parallel Manipulators , 1992 .

[18]  J.Eddie Baker.  The Bennett linkage and its associated quadric surfaces , 1988 .

[19]  Z. M. Bi,et al.  Forward kinematic solution and its applications for a 3-DOF parallel kinematic machine (PKM) with a passive link , 2006, Robotica.

[20]  Clément Gosselin,et al.  Type Synthesis of Three-Degree-of-Freedom Spherical Parallel Manipulators , 2004, Int. J. Robotics Res..

[21]  Joseph Duffy,et al.  A Direct Determination of the Instantaneous Kinematics of Fully Parallel Robot Manipulators , 1985 .

[22]  Jian S. Dai,et al.  A six-component contact force measurement device based on the Stewart platform , 2000 .

[23]  J. Dai,et al.  Geometric Analysis of Overconstrained Parallel Manipulators with Three and Four Degrees of Freedom , 2002 .

[24]  Joseph K. Davidson,et al.  Robots and Screw Theory: Applications of Kinematics and Statics to Robotics , 2004 .