Stabilization Methods for Sensorless Induction Motor Drives—A Survey

The challenges of achieving stability and good damping of a sensorless induction motor drive are much greater than for a sensored drive. In this paper, some frequently proposed flux and speed estimators-such as reduced- and full-order observers-are reviewed, along with their key static and dynamic properties as well as their parameter sensitivities. Three commonly occurring instability phenomena and their remedies are discussed, along with suitable analysis methods. Low-speed instabilities are most severe, and therefore, the stator resistance is the single most critical parameter. Methods for reducing the impact of this parameter are discussed.

[1]  Giansalvo Cirrincione,et al.  Sensorless Control of Induction Motors by Reduced Order Observer With MCA EXIN + Based Adaptive Speed Estimation , 2007, IEEE Transactions on Industrial Electronics.

[2]  Yoichi Hori,et al.  A New Model Reference Adaptive Controller for Four Quadrant Vector Controlled Induction Motor Drives , 2012, IEEE Transactions on Industrial Electronics.

[3]  H. Kubota,et al.  DSP-based speed adaptive flux observer of induction motor , 1991, Conference Record of the 1991 IEEE Industry Applications Society Annual Meeting.

[4]  L. Harnefors,et al.  Instability phenomena and remedies in sensorless indirect field oriented control , 2000 .

[5]  L. Harnefors,et al.  Comparison of a Reduced-Order Observer and a Full-Order Observer for Sensorless Synchronous Motor Drives , 2012, IEEE Transactions on Industry Applications.

[6]  Karl Johan Åström,et al.  Adaptive Control (2 ed.) , 1995 .

[7]  S. Sangwongwanich,et al.  A Unified Speed Estimation Design Framework for Sensorless AC Motor Drives Based on Positive-Real Property , 2007, 2007 Power Conversion Conference - Nagoya.

[8]  Yoichi Hori,et al.  An Adaptive Speed Sensorless Induction Motor Drive With Artificial Neural Network for Stability Enhancement , 2012, IEEE Transactions on Industrial Informatics.

[9]  K. Matsuse,et al.  Behavior of sensorless induction motor drives in regenerating mode , 1997, Proceedings of Power Conversion Conference - PCC '97.

[10]  Thomas G. Habetler,et al.  Sensorless speed measurement using current harmonic spectral estimation in induction machine drives , 1994 .

[11]  T. G. Habetler,et al.  A Nonintrusive Thermal Monitoring Method for Induction Motors Fed by Closed-Loop Inverter Drives , 2012, IEEE Transactions on Power Electronics.

[12]  M. Hinkkanen.  Analysis and design of full-order flux observers for sensorless induction motors , 2002, IEEE 2002 28th Annual Conference of the Industrial Electronics Society. IECON 02.

[13]  Manfred Depenbrock,et al.  Model-based speed identification for induction Machines in the whole operating range , 2006, IEEE Transactions on Industrial Electronics.

[14]  A. Garcia-Cerrada,et al.  On-line estimation of the stator parameters in an induction motor using only voltage and current measurements , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[15]  Marko Hinkkanen,et al.  Complete Stability of Reduced-Order and Full-Order Observers for Sensorless IM Drives , 2008, IEEE Transactions on Industrial Electronics.

[16]  G.R. Slemon,et al.  Modelling of inductance machines for electric drives , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[17]  Mineo Tsuji,et al.  A sensorless vector control system for induction motors using q-axis flux with stator resistance identification , 2001, IEEE Trans. Ind. Electron..

[18]  C. Xiao.  Speed Sensorless Control of Induction Motors , 2008 .

[19]  Yoichi Hori,et al.  Model Reference Adaptive Controller-Based Rotor Resistance and Speed Estimation Techniques for Vector Controlled Induction Motor Drive Utilizing Reactive Power , 2008, IEEE Transactions on Industrial Electronics.

[20]  I. Kioskeridis,et al.  Thermal and slip effects on rotor time constant in vector controlled induction motor drives , 2006, IEEE Transactions on Power Electronics.

[21]  Hans-Peter Nee,et al.  Model-based current control of AC machines using the internal model control method , 1995 .

[22]  Ivo Herman,et al.  AC Drive Observability Analysis , 2013, IEEE Transactions on Industrial Electronics.

[23]  Bimal K. Bose,et al.  A programmable cascaded low-pass filter-based flux synthesis for a stator flux-oriented vector-controlled induction motor drive , 1997, IEEE Trans. Ind. Electron..

[24]  O. Wasynczuk,et al.  Virtual Thermal Sensing for Electric Machines , 2010, IEEE Control Systems.

[25]  Bimal K. Bose,et al.  Power Electronics and Variable Frequency Drives , 1996 .

[26]  V. Ambrozic,et al.  Sensorless control of induction machine with parameter adaptation , 1999, ISIE '99. Proceedings of the IEEE International Symposium on Industrial Electronics (Cat. No.99TH8465).

[27]  C. Schauder,et al.  Adaptive speed identification for vector control of induction motors without rotational transducers , 1989, Conference Record of the IEEE Industry Applications Society Annual Meeting,.

[28]  Gerardo Espinosa-Pérez,et al.  Global observability analysis of sensorless induction motors , 2004, Autom..

[29]  Kouki Matsuse,et al.  Regenerating-mode low-speed operation of sensorless induction motor drive with adaptive observer , 2002 .

[30]  Joachim Holtz,et al.  Drift and parameter compensated flux estimator for persistent zero stator frequency operation of sensorless controlled induction motors , 2002 .

[31]  Jan Melkebeek,et al.  Speed sensorless direct torque control of induction motors using an adaptive flux observer , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[32]  F. Blaabjerg,et al.  Very-low-speed variable-structure control of sensorless induction machine drives without signal injection , 2005, IEEE Transactions on Industry Applications.

[33]  A. F. Stronach,et al.  A stable back-EMF MRAS-based sensorless low-speed induction motor drive insensitive to stator resistance variation , 2004 .

[34]  Mark Sumner,et al.  Dynamic performance limitations for MRAS based sensorless induction motor drives. Part 1: Stability analysis for the closed loop drive , 1996 .

[35]  Marko Hinkkanen,et al.  Stabilization of regenerating-mode operation in sensorless induction motor drives by full-order flux observer design , 2004, IEEE Transactions on Industrial Electronics.

[36]  Lennart Harnefors,et al.  On analysis, control and estimation of variable-speed drives , 1997 .

[37]  Lennart Harnefors,et al.  Globally Stable Speed-Adaptive Observers for Sensorless Induction Motor Drives , 2007, IEEE Transactions on Industrial Electronics.

[38]  Mohamed S. Zaky,et al.  Stability Analysis of Speed and Stator Resistance Estimators for Sensorless Induction Motor Drives , 2012, IEEE Transactions on Industrial Electronics.

[39]  J. Holtz,et al.  Sensorless vector control of induction motors at very low speed using a nonlinear inverter model and parameter identification , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[40]  S. Sanders,et al.  Speed sensorless vector torque control of induction machines using a two-time-scale approach , 1996, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting.

[41]  Dong-Seok Hyun,et al.  An improved stator flux estimation for speed sensorless stator flux orientation control of induction motors , 1998, PESC 98 Record. 29th Annual IEEE Power Electronics Specialists Conference (Cat. No.98CH36196).

[42]  Toshihiko Noguchi,et al.  A New Quick-Response and High-Efficiency Control Strategy of an Induction Motor , 1986, IEEE Transactions on Industry Applications.

[43]  Hans-Peter Nee,et al.  Full-Order Observers for Flux and Parameter Estimation of Induction Motors , 1997 .

[44]  Mark Sumner,et al.  Comparative analysis of experimental performance and stability of sensorless induction motor drives , 2006, IEEE Transactions on Industrial Electronics.

[45]  Oskar Wallmark,et al.  Synchronization at startup and stable rotation reversal of sensorless nonsalient PMSM drives , 2006, IEEE Transactions on Industrial Electronics.

[46]  Iven M. Y. Mareels,et al.  Indirect field-oriented control of induction motors is robustly globally stable , 1996, Autom..

[47]  Mark Sumner,et al.  Performance of FFT-rotor slot harmonic speed detector for sensorless induction motor drives , 1996 .

[48]  Thomas G. Habetler,et al.  eed Measurement Usin ic Spectral Estimation i achine Driv , 1996 .

[49]  J. T. Boys,et al.  Empirical thermal model for inverter-driven cage induction machines , 1994 .

[50]  George C. Verghese,et al.  Observers for flux estimation in induction machines , 1988 .

[51]  Marko Hinkkanen,et al.  Reduced-order flux observers with stator-resistance adaptation for speed-sensorless induction motor drives , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[52]  Frede Blaabjerg,et al.  Comparative study of adaptive and inherently sensorless observers for variable-speed induction-motor drives , 2006, IEEE Transactions on Industrial Electronics.

[53]  Surapong Suwankawin,et al.  A speed-sensorless IM drive with decoupling control and stability analysis of speed estimation , 2002, IEEE Trans. Ind. Electron..

[54]  Tadashi Fukao,et al.  Robust speed identification for speed sensorless vector control of induction motors , 1993, Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting.

[55]  Mark Sumner,et al.  Dynamic performance limitations for MRAS based sensorless induction motor drives. Part 2: Online parameter tuning and dynamic performance studies , 1996 .

[56]  Surapong Suwankawin,et al.  Design strategy of an adaptive full-order observer for speed-sensorless induction-motor Drives-tracking performance and stabilization , 2006, IEEE Transactions on Industrial Electronics.

[57]  Atsuo Kawamura,et al.  Sensorless very low-speed and zero-speed estimations with online rotor resistance estimation of induction motor without signal injection , 2000 .

[58]  Robert D. Lorenz,et al.  Transducerless position and velocity estimation in induction and salient AC machines , 1994, Proceedings of 1994 IEEE Industry Applications Society Annual Meeting.

[59]  M. Depenbrock,et al.  Direct self-control (DSC) of inverter-fed induction machine , 1988 .

[60]  L. Harnefors,et al.  Stabilization of sensorless induction motor drives: A survey , 2013, 2013 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD).

[61]  R. Lorenz,et al.  A physically insightful approach to the design and accuracy assessment of flux observers for field oriented induction machine drives , 1992 .

[62]  Somboon Sangwongwanich,et al.  Averaging analysis approach for stability analysis of speed-sensorless induction motor drives with stator resistance estimation , 2006, IEEE Transactions on Industrial Electronics.

[63]  Lennart Harnefors,et al.  Regenerating-Mode Stabilization of the “Statically Compensated Voltage Model” , 2007, IEEE Transactions on Industrial Electronics.

[64]  Lennart Harnefors,et al.  Design and analysis of general rotor-flux-oriented vector control systems , 2001, IEEE Trans. Ind. Electron..

[65]  Lennart Harnefors,et al.  Unified sensorless vector control of synchronous and induction motors , 2003, IEEE Trans. Ind. Electron..

[66]  Marko Hinkkanen,et al.  Online Identification of Parameters Defining the Saturation Characteristics of Induction Machines , 2012, IEEE Transactions on Industry Applications.