Direct-print photopolymerization for 3D printing

Purpose This work aims to present a guideline for ink development used in extrusion-based direct-write (DW) (also referred to as direct-print [DP]) technique and combine the extrusion with instant photopolymerization to present a solvent-free DP photopolymerization (DPP) method to fill the gap between 3D printing and printing multi-functional 3D structures. Design/methodology/approach A DP process called DPP was developed by integration of a screw-driven micro-dispenser into XYZ translation stages. The process was equipped with direct photopolymerization to facilitate the creation of 3D structures. The required characteristics of inks used in this technique were simulated through dispersion of fumed silica particles into photocurable resins to transform them into viscoelastic inks. The characterization method of these inks and the required level of shear thinning and thixotropic properties is presented. Findings Shear thinning and thixotropic properties are necessary components of the inks used in DPP process and other DP techniques. These properties are desirable to facilitate printing and filament shape retention. Extrusion of viscoelastic inks out of a nozzle generates a filament capable of retaining its geometry. Likewise, instant photopolymerization of the dispensed filaments prevents deformation due to the weight of filaments or accumulated weight of layers. Originality/value The DPP process with material-reforming methods has been shown, where there remain many shortcomings in realizing a DP-based 3D printing process with instant photopolymerization in existing literature, as well as a standard guideline and material requirements. The suggested method can be extended to develop a new commercial 3D printing system and printable inks to create various functional 3D structures including sensors, actuators and electronics, where nanoparticles are involved for their functionalities. Particularly, an original contribution to the determination of a rheological property of an ink is provided.

[1]  Joseph Cesarano,et al.  Colloidal inks for directed assembly of 3-D periodic structures , 2002 .

[2]  D. Therriault,et al.  Solvent-cast three-dimensional printing of multifunctional microsystems. , 2013, Small.

[3]  M. Vatani,et al.  Experimental and Numerical Analysis of Filament Front Deformation for Direct-Print , 2016 .

[4]  J. Lewis,et al.  3D Printing of Interdigitated Li‐Ion Microbattery Architectures , 2013, Advanced materials.

[5]  Xiongbiao Chen.  Modeling of Rotary Screw Fluid Dispensing Processes , 2007 .

[6]  Eric B Duoss,et al.  Direct-write assembly of microperiodic planar and spanning ITO microelectrodes. , 2010, Chemical communications.

[7]  I. Gibson,et al.  State of the art and future direction of additive manufactured scaffolds-based bone tissue engineering , 2014 .

[8]  Scott R. White,et al.  Rheological Behavior of Fugitive Organic Inks for Direct-Write Assembly , 2007 .

[9]  Thomas A. Campbell,et al.  3D printing of multifunctional nanocomposites , 2013 .

[10]  E. Engeberg,et al.  Force and slip detection with direct-write compliant tactile sensors using multi-walled carbon nanotube/polymer composites , 2013 .

[11]  Charlie C. L. Wang,et al.  The status, challenges, and future of additive manufacturing in engineering , 2015, Comput. Aided Des..

[12]  E. Engeberg,et al.  Detection of the position, direction and speed of sliding contact with a multi-layer compliant tactile sensor fabricated using direct-print technology , 2014 .

[13]  Alfredo M. Morales,et al.  Microfabricated Deposition Nozzles for Direct‐Write Assembly of Three‐Dimensional Periodic Structures , 2005 .

[14]  E. Engeberg,et al.  Direct-write of multi-layer tactile sensors , 2013, 2013 13th International Conference on Control, Automation and Systems (ICCAS 2013).

[15]  J. Lewis,et al.  Microperiodic structures: Direct writing of three-dimensional webs , 2004, Nature.

[16]  H. Barnes.  Thixotropy—a review , 1997 .

[17]  Koji Ikuta,et al.  A three-dimensional microfabrication system for biodegradable polymers with high resolution and biocompatibility , 2008 .

[18]  J. Lewis,et al.  Conformal Printing of Electrically Small Antennas on Three‐Dimensional Surfaces , 2011, Advanced materials.

[19]  Jae-Won Choi,et al.  Conformal direct-print of piezoresistive polymer/nanocomposites for compliant multi-layer tactile sensors , 2015 .

[20]  J. Lewis,et al.  Fugitive Inks for Direct‐Write Assembly of Three‐Dimensional Microvascular Networks , 2005 .

[21]  John A. Rogers,et al.  Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes , 2009, Science.

[22]  Dietmar W Hutmacher,et al.  Direct Writing By Way of Melt Electrospinning , 2011, Advanced materials.

[23]  J. Lewis,et al.  Direct writing in three dimensions , 2004 .

[24]  Robert F. Shepherd,et al.  Direct‐Write Assembly of 3D Hydrogel Scaffolds for Guided Cell Growth , 2009 .

[25]  Daniel Therriault,et al.  Ultraviolet‐Assisted Direct‐Write Fabrication of Carbon Nanotube/Polymer Nanocomposite Microcoils , 2010, Advanced materials.