An improved procedure for the experimental characterization of optical efficiency in evacuated tube solar collectors

The standard EN 12975-2 provides guidelines for testing solar collectors both in stationary and quasi-dynamic conditions. The second test method allows the optical efficiency of flat-plate collectors and even evacuated tube collectors to be determined by applying the extended multiple linear regression. However, in the case of tubular shape collectors, the available procedure requires a large number of data, above all for the determination of the transversal incidence angle modifier, which is the parameter describing the optical response of the absorber tube to the direct beam on the plane normal to the tube axis. Here, an improved procedure to determine the transversal incidence angle modifier is presented and validated against experimental data.

[1]  Sergio Colle,et al.  Uncertainty calculation applied to different regression methods in the quasi-dynamic collector test , 2006 .

[2]  Bengt Perers,et al.  On the factorisation of incidence angle modifiers for CPC collectors , 1995 .

[3]  V. Wittwer,et al.  Optical and thermal testing of a new 1.12X CPC solar collector , 1995 .

[4]  Graham L. Morrison,et al.  Performance of a Water-in-Glass Evacuated Tube Solar Water Heater , 2001 .

[5]  William A. Beckman,et al.  Solar transmittance characteristics of evacuated tubular collectors with diffuse back reflectors , 1985 .

[6]  A. C. Arthur BSc.,et al.  The variation of solar transmittance with angle of incidence , 1990 .

[7]  K. A. Reed,et al.  Orientational relationships for optically non-symmetric solar collectors , 1983 .

[8]  Bengt Perers.  An improved dynamic solar collector test method for determination of non-linear optical and thermal characteristics with multiple regression , 1997 .

[9]  E. Wäckelgård,et al.  Angular solar absorptance and incident angle modifier of selective absorbers for solar thermal collectors , 2000 .

[10]  Natale Arcuri,et al.  Solar radiation utilisability method in heat pipe panels , 1996 .

[11]  W. Beckman,et al.  Solar Engineering of Thermal Processes , 1985 .

[12]  Enrico Zambolin,et al.  Experimental analysis of thermal performance of flat plate and evacuated tube solar collectors in stationary standard and daily conditions , 2010 .

[13]  G. L. Harding,et al.  Effect of collector components on the collection efficiency of tubular evacuated collectors with diffuse reflectors , 1984 .

[14]  D. D. Col,et al.  Measurement and modeling of solar irradiance components on horizontal and tilted planes , 2010 .

[15]  C. Grass,et al.  Comparison of the optics of non-tracking and novel types of tracking solar thermal collectors for process heat applications up to 300 °C , 2004 .

[16]  Claudio A. Estrada,et al.  A device for measuring the angular distribution of incident radiation on tubular solar collectors , 1995 .

[17]  A. Rabl,et al.  Incidence-Angle Modifier and Average Optical Efficiency of Parabolic Trough Collectors , 1979 .