Polymerizations with elemental sulfur: A novel route to high sulfur content polymers for sustainability, energy and defense
暂无分享,去创建一个
Kookheon Char | Richard S. Glass | K. Char | Jared J. Griebel | R. S. Glass | J. Pyun | Jeffrey Pyun | J. J. Griebel | R. Glass
[1] K. Char,et al. A one-pot synthesis of polysulfane-bearing block copolymer nanoparticles with tunable size and refractive index. , 2016, Chemical communications.
[2] Yong Huang,et al. Three-dimensional porous carbon composites containing high sulfur nanoparticle content for high-performance lithium–sulfur batteries , 2016, Nature Communications.
[3] B. Kiskan,et al. Combining Elemental Sulfur with Polybenzoxazines via Inverse Vulcanization , 2016 .
[4] B. Tang,et al. Catalyst-Free, Atom-Economic, Multicomponent Polymerizations of Aromatic Diynes, Elemental Sulfur, and Aliphatic Diamines toward Luminescent Polythioamides , 2015 .
[5] Jonathan A. Campbell,et al. Sulfur‐Limonene Polysulfide: A Material Synthesized Entirely from Industrial By‐Products and Its Use in Removing Toxic Metals from Water and Soil , 2015, Angewandte Chemie.
[6] Chunjoong Kim,et al. Copolymerization of Polythiophene and Sulfur To Improve the Electrochemical Performance in Lithium–Sulfur Batteries , 2015 .
[7] J. M. Gardner,et al. Solution processable, cross-linked sulfur polymers as solid electrolytes in dye-sensitized solar cells. , 2015, Chemical communications.
[8] S. D. Hudson,et al. Structural origins of enhanced capacity retention in novel copolymerized sulfur-based composite cathodes for high-energy density Li-S batteries , 2015 .
[9] Laura E. Anderson,et al. Dynamic Covalent Polymers via Inverse Vulcanization of Elemental Sulfur for Healable Infrared Optical Materials. , 2015, ACS macro letters.
[10] Seung Jae Yang,et al. Stabilization of Insoluble Discharge Products by Facile Aniline Modification for High Performance Li‐S Batteries , 2015 .
[11] Tae Hoon Kim,et al. Lithium-Sulfur Batteries: Stabilization of Insoluble Discharge Products by Facile Aniline Modification for High Performance Li-S Batteries (Adv. Energy Mater. 14/2015) , 2015 .
[12] H. Hillhouse,et al. Sulfur copolymer for the direct synthesis of ligand-free CdS nanoparticles. , 2015, Chemical communications.
[13] W. J. Peveler,et al. Nanoparticle-sulphur "inverse vulcanisation" polymer composites. , 2015, Chemical communications.
[14] Moon Jeong Park,et al. Synthesis of three-dimensionally interconnected sulfur-rich polymers for cathode materials of high-rate lithium–sulfur batteries , 2015, Nature Communications.
[15] Won Tae Joe,et al. High sulfur content polymer nanoparticles obtained from interfacial polymerization of sodium polysulfide and 1,2,3-trichloropropane in water. , 2015, Macromolecular rapid communications.
[16] Xiaogang Zhang,et al. Nanospace-confinement copolymerization strategy for encapsulating polymeric sulfur into porous carbon for lithium-sulfur batteries. , 2015, ACS applied materials & interfaces.
[17] Heon-Jin Choi,et al. Preparation and characterization of a new cement-based composite with sulfur polymer , 2015 .
[18] Laura E. Anderson,et al. Inverse vulcanization of elemental sulfur with 1,4-diphenylbutadiyne for cathode materials in Li–S batteries , 2015 .
[19] Tomoya Higashihara,et al. Recent Progress in High Refractive Index Polymers , 2015 .
[20] Yaochen Zheng,et al. Solution processible hyperbranched inverse-vulcanized polymers as new cathode materials in Li–S batteries , 2015 .
[21] Dipan Kundu,et al. Rational design of sulphur host materials for Li-S batteries: correlating lithium polysulphide adsorptivity and self-discharge capacity loss. , 2015, Chemical communications.
[22] K. Char,et al. Kilogram scale inverse vulcanization of elemental sulfur to prepare high capacity polymer electrodes for Li‐S batteries , 2015 .
[23] Zhian Zhang,et al. Coaxial-cable structure composite cathode material with high sulfur loading for high performance lithium-sulfur batteries , 2015 .
[24] Zhian Zhang,et al. Micro-nano structure composite cathode material with high sulfur loading for advanced lithium–sulfur batteries , 2015 .
[25] Kyle J. Arrington,et al. Improving the Charge Conductance of Elemental Sulfur via Tandem Inverse Vulcanization and Electropolymerization. , 2015, ACS macro letters.
[26] Feng Wu,et al. From a historic review to horizons beyond: lithium-sulphur batteries run on the wheels. , 2015, Chemical communications.
[27] K. Char,et al. Preparation of Dynamic Covalent Polymers via Inverse Vulcanization of Elemental Sulfur. , 2014, ACS macro letters.
[28] Hong‐Jie Peng,et al. Hierarchical Vine‐Tree‐Like Carbon Nanotube Architectures: In‐Situ CVD Self‐Assembly and Their Use as Robust Scaffolds for Lithium‐Sulfur Batteries , 2014, Advanced materials.
[29] Zhian Zhang,et al. Improved cyclability of lithium–sulfur battery cathode using encapsulated sulfur in hollow carbon nanofiber@nitrogen-doped porous carbon core–shell composite , 2014 .
[30] Hong‐Jie Peng,et al. Catalytic self-limited assembly at hard templates: a mesoscale approach to graphene nanoshells for lithium-sulfur batteries. , 2014, ACS nano.
[31] S. Dou,et al. Sulfur-graphene nanostructured cathodes via ball-milling for high-performance lithium-sulfur batteries. , 2014, ACS nano.
[32] Xin-Bing Cheng,et al. Nitrogen‐Doped Aligned Carbon Nanotube/Graphene Sandwiches: Facile Catalytic Growth on Bifunctional Natural Catalysts and Their Applications as Scaffolds for High‐Rate Lithium‐Sulfur Batteries , 2014, Advanced materials.
[33] Weidong Zhou,et al. Polydopamine-coated, nitrogen-doped, hollow carbon-sulfur double-layered core-shell structure for improving lithium-sulfur batteries. , 2014, Nano letters.
[34] Huan Wang,et al. Sulfur copolymer nanowires with enhanced visible-light photoresponse. , 2014, Chemical communications.
[35] Yang Liu,et al. A highly ordered meso@microporous carbon-supported sulfur@smaller sulfur core-shell structured cathode for Li-S batteries. , 2014, ACS nano.
[36] Dipan Kundu,et al. Surface-enhanced redox chemistry of polysulphides on a metallic and polar host for lithium-sulphur batteries , 2014, Nature Communications.
[37] Xiaogang Zhang,et al. High performance lithium–sulfur batteries: advances and challenges , 2014 .
[38] Yuegang Zhang,et al. Polyaniline-modified cetyltrimethylammonium bromide-graphene oxide-sulfur nanocomposites with enhanced performance for lithium-sulfur batteries , 2014, Nano Research.
[39] Arumugam Manthiram,et al. Rechargeable lithium-sulfur batteries. , 2014, Chemical reviews.
[40] Guohua Chen,et al. Sulfur-rich polymeric materials with semi-interpenetrating network structure as a novel lithium–sulfur cathode , 2014 .
[41] K. Char,et al. One-pot synthesis of PbS NP/sulfur-oleylamine copolymer nanocomposites via the copolymerization of elemental sulfur with oleylamine , 2014 .
[42] L. Nazar,et al. Stable cycling of a scalable graphene-encapsulated nanocomposite for lithium-sulfur batteries. , 2014, ACS applied materials & interfaces.
[43] U. Schubert,et al. Polymers based on stable phenoxyl radicals for the use in organic radical batteries. , 2014, Macromolecular rapid communications.
[44] Soha Namnabat,et al. New Infrared Transmitting Material via Inverse Vulcanization of Elemental Sulfur to Prepare High Refractive Index Polymers , 2014, Advanced materials.
[45] Ayesha Kausar,et al. Recent Developments in Sulfur-Containing Polymers , 2014 .
[46] K. Char,et al. Inverse Vulcanization of Elemental Sulfur to Prepare Polymeric Electrode Materials for Li-S Batteries. , 2014, ACS macro letters.
[47] O. Soppera,et al. Introduction of self-healing properties into covalent polymer networks via the photodissociation of alkoxyamine junctions , 2014 .
[48] J. Eckert,et al. Carbohydrate-Derived Nanoarchitectures: On a Synergistic Effect Toward an Improved Performance in Lithium–Sulfur Batteries , 2014 .
[49] J. Jeon,et al. Charge Storage in Decyl- and 3,6,9-Trioxadecyl-Substituted Poly(dithieno[3,2-b:2,3-d]pyrrole) Electrodes , 2014 .
[50] James R. McKone,et al. Will Solar-Driven Water-Splitting Devices See the Light of Day? , 2014 .
[51] Li-Jun Wan,et al. Lithium-sulfur batteries: electrochemistry, materials, and prospects. , 2013, Angewandte Chemie.
[52] X. Su,et al. Phase-controlled synthesis of Cu2ZnSnS4 nanocrystals: the role of reactivity between Zn and S. , 2013, Journal of the American Chemical Society.
[53] Chun Cheng,et al. CORRIGENDUM: Nature of hardness evolution in nanocrystalline NiTi shape memory alloys during solid-state phase transition , 2013, Scientific Reports.
[54] Guohua Chen,et al. Graphene-encapsulated sulfur (GES) composites with a core???shell structure as superior cathode materials for lithium???sulfur batteries , 2013 .
[55] Min-Kyu Song,et al. A long-life, high-rate lithium/sulfur cell: a multifaceted approach to enhancing cell performance. , 2013, Nano letters.
[56] Yingchao Yu,et al. Yolk-shell structure of polyaniline-coated sulfur for lithium-sulfur batteries. , 2013, Journal of the American Chemical Society.
[57] Bruno Scrosati,et al. Recent progress and remaining challenges in sulfur-based lithium secondary batteries--a review. , 2013, Chemical communications.
[58] Kefei Li,et al. Mesoporous graphene paper immobilised sulfur as a flexible electrode for lithium–sulfur batteries , 2013 .
[59] J. Jeon,et al. Charge storage in polymer acid-doped polyaniline-based layer-by-layer electrodes. , 2013, ACS applied materials & interfaces.
[60] Xufeng Zhou,et al. Sulfur/Carbon Nanotube Composite Film as a Flexible Cathode for Lithium–Sulfur Batteries , 2013 .
[61] Weidong Zhou,et al. Amylopectin wrapped graphene oxide/sulfur for improved cyclability of lithium-sulfur battery. , 2013, ACS nano.
[62] K. Char,et al. Synthesis, self-assembly and reversible healing of supramolecular perfluoropolyethers , 2013 .
[63] A. Basu,et al. Expedition of in vitro dissolution and in vivo pharmacokinetic profiling of sulfur nanoparticles based antimicrobials. , 2013, Environmental toxicology and pharmacology.
[64] Christoph Weder,et al. Optically healable polymers. , 2013, Chemical Society reviews.
[65] A. Manthiram,et al. Hydroxylated Graphene–Sulfur Nanocomposites for High‐Rate Lithium–Sulfur Batteries , 2013 .
[66] M. Engelhard,et al. Molecular structures of polymer/sulfur composites for lithium–sulfur batteries with long cycle life , 2013 .
[67] Stuart J. Rowan,et al. Inherently Photohealable and Thermal Shape-Memory Polydisulfide Networks. , 2013, ACS macro letters.
[68] Yi Cui,et al. Crab shells as sustainable templates from nature for nanostructured battery electrodes. , 2013, Nano letters.
[69] J. Jeon,et al. Porous polyaniline nanofiber/vanadium pentoxide layer-by-layer electrodes for energy storage , 2013 .
[70] Jeong Jae Wie,et al. The use of elemental sulfur as an alternative feedstock for polymeric materials. , 2013, Nature chemistry.
[71] J. Jeon,et al. Oxidatively stable polyaniline:polyacid electrodes for electrochemical energy storage. , 2013, Physical chemistry chemical physics : PCCP.
[72] Wei Lu,et al. Ultrafine Sulfur Nanoparticles in Conducting Polymer Shell as Cathode Materials for High Performance Lithium/Sulfur Batteries , 2013, Scientific Reports.
[73] Jie Liu,et al. Significantly improved long-cycle stability in high-rate Li-S batteries enabled by coaxial graphene wrapping over sulfur-coated carbon nanofibers. , 2013, Nano letters.
[74] A. Manthiram,et al. Challenges and prospects of lithium-sulfur batteries. , 2013, Accounts of chemical research.
[75] L. Nazar,et al. New approaches for high energy density lithium-sulfur battery cathodes. , 2013, Accounts of chemical research.
[76] Yu-Guo Guo,et al. Tuning the porous structure of carbon hosts for loading sulfur toward long lifespan cathode materials for Li–S batteries , 2013 .
[77] Guangyuan Zheng,et al. High-performance hollow sulfur nanostructured battery cathode through a scalable, room temperature, one-step, bottom-up approach , 2013, Proceedings of the National Academy of Sciences.
[78] Qiang Zhang,et al. Enhanced rifampicin delivery to alveolar macrophages by solid lipid nanoparticles , 2013, Journal of Nanoparticle Research.
[79] A. Goswami,et al. Investigation of antimicrobial physiology of orthorhombic and monoclinic nanoallotropes of sulfur at the interface of transcriptome and metabolome , 2013, Applied Microbiology and Biotechnology.
[80] Li-Jun Wan,et al. Encapsulation of Sulfur in a Hollow Porous Carbon Substrate for Superior Li‐S Batteries with Long Lifespan , 2013 .
[81] A. Goswami,et al. Evaluation of physicochemical properties, and antimicrobial efficacy of monoclinic sulfur-nanocolloid , 2013, Journal of Nanoparticle Research.
[82] J. Eckert,et al. Hydrothermal carbon-based nanostructured hollow spheres as electrode materials for high-power lithium-sulfur batteries. , 2013, Physical chemistry chemical physics : PCCP.
[83] Qiang Sun,et al. High sulfur loading cathodes fabricated using peapodlike, large pore volume mesoporous carbon for lithium-sulfur battery. , 2013, ACS applied materials & interfaces.
[84] S. Rowan,et al. CHAPTER 4:Healable Supramolecular Polymeric Materials , 2013 .
[85] Christopher J. Kloxin. CHAPTER 3:Reversible Covalent Bond Formation as a Strategy for Healable Polymer Networks , 2013 .
[86] D. Mecerreyes,et al. Polymers with redox properties: materials for batteries, biosensors and more , 2013 .
[87] Min-Kyu Song,et al. Lithium/sulfur batteries with high specific energy: old challenges and new opportunities. , 2013, Nanoscale.
[88] Kai Xi,et al. Carbon with hierarchical pores from carbonized metal-organic frameworks for lithium sulphur batteries. , 2013, Chemical communications.
[89] Guangyuan Zheng,et al. Amphiphilic surface modification of hollow carbon nanofibers for improved cycle life of lithium sulfur batteries. , 2013, Nano letters.
[90] X. Tao,et al. Highly mesoporous carbon foams synthesized by a facile, cost-effective and template-free Pechini method for advanced lithium–sulfur batteries , 2013 .
[91] K. Dey,et al. Colloidal stability and coagulation kinetics study of different sized sulphur nanoparticles , 2013 .
[92] E. Block,et al. Liquid sulfur as a reagent: synthesis of polysulfanes with 20 or more sulfur atoms with characterization by UPLC-(Ag+)-coordination ion spray-MS , 2013 .
[93] Guoqiang Ma,et al. Flexible self-supporting graphene–sulfur paper for lithium sulfur batteries , 2013 .
[94] M. Sherwood,et al. Thermally Induced Nanoimprinting of Biodegradable Polycarbonates Using Dynamic Covalent Cross-Links. , 2013, ACS macro letters.
[95] Xiaogang Zhang,et al. Encapsulating sulfur into hierarchically ordered porous carbon as a high-performance cathode for lithium-sulfur batteries. , 2013, Chemistry.
[96] Guangyuan Zheng,et al. Sulphur–TiO2 yolk–shell nanoarchitecture with internal void space for long-cycle lithium–sulphur batteries , 2013, Nature Communications.
[97] Lixia Yuan,et al. Dual core–shell structured sulfur cathode composite synthesized by a one-pot route for lithium sulfur batteries , 2013 .
[98] A. Goswami,et al. Supramolecular reactive sulphur nanoparticles: a novel and efficient antimicrobial agent , 2013, Journal of applied microbiology.
[99] Lin Gu,et al. Smaller sulfur molecules promise better lithium-sulfur batteries. , 2012, Journal of the American Chemical Society.
[100] N. Bowden,et al. New Polymers Possessing a Disulfide Bond in a Unique Environment , 2012 .
[101] Arumugam Manthiram,et al. Self-weaving sulfur-carbon composite cathodes for high rate lithium-sulfur batteries. , 2012, Physical chemistry chemical physics : PCCP.
[102] Jianjun Li,et al. Analysis of the synthesis process of sulphur–poly(acrylonitrile)-based cathode materials for lithium batteries , 2012 .
[103] S. Rowan,et al. Redox-induced polymerisation/depolymerisation of metallo-supramolecular polymers , 2012 .
[104] Shi-Gang Sun,et al. A composite material of uniformly dispersed sulfur on reduced graphene oxide: Aqueous one-pot synthesis, characterization and excellent performance as the cathode in rechargeable lithium-sulfur batteries , 2012, Nano Research.
[105] Feng Li,et al. A flexible nanostructured sulphur–carbon nanotube cathode with high rate performance for Li-S batteries , 2012 .
[106] X. Lou,et al. Confining sulfur in double-shelled hollow carbon spheres for lithium-sulfur batteries. , 2012, Angewandte Chemie.
[107] Linda F. Nazar,et al. Understanding the Nature of Absorption/Adsorption in Nanoporous Polysulfide Sorbents for the Li–S Battery , 2012 .
[108] K. Pinkwart,et al. Lithium–sulphur batteries – binder free carbon nanotubes electrode examined with various electrolytes , 2012 .
[109] Arumugam Manthiram,et al. A facile in situ sulfur deposition route to obtain carbon-wrapped sulfur composite cathodes for lithium-sulfur batteries , 2012 .
[110] S. Rowan,et al. Supramolecular gels formed from multi-component low molecular weight species. , 2012, Chemical Society reviews.
[111] Krzysztof Matyjaszewski,et al. Self‐Healing of Covalently Cross‐Linked Polymers by Reshuffling Thiuram Disulfide Moieties in Air under Visible Light , 2012, Advanced materials.
[112] C. Bowman,et al. Stress Reduction and T(g) Enhancement in Ternary Thiol-Yne-Methacrylate Systems via Addition-fragmentation Chain Transfer. , 2012, Macromolecules.
[113] C. Bowman,et al. Stress relaxation via addition-fragmentation chain transfer in high T(g), high conversion methacrylate-based systems. , 2012, Macromolecules.
[114] Justin R. Kumpfer,et al. Directed Self-Assembly of Metallosupramolecular Polymers at the Polymer-Polymer Interface. , 2012, ACS macro letters.
[115] A. Manthiram,et al. Core-shell structured sulfur-polypyrrole composite cathodes for lithium-sulfur batteries , 2012 .
[116] Xin-bo Zhang,et al. Facile and effective synthesis of reduced graphene oxide encapsulated sulfur via oil/water system for high performance lithium sulfur cells , 2012 .
[117] A. Goswami,et al. Polyethylene glycol-stabilized sulphur nanoparticles: an effective antimicrobial agent against multidrug-resistant bacteria. , 2012, The Journal of antimicrobial chemotherapy.
[118] Xiangyun Song,et al. Nano-carbon/sulfur composite cathode materials with carbon nanofiber as electrical conductor for advanced secondary lithium/sulfur cells , 2012 .
[119] Ludwik Leibler,et al. Metal-catalyzed transesterification for healing and assembling of thermosets. , 2012, Journal of the American Chemical Society.
[120] C. Bowman,et al. Covalent adaptable networks: reversible bond structures incorporated in polymer networks. , 2012, Angewandte Chemie.
[121] A. Goswami,et al. Inhibitory Effects of Sulfur Nanoparticles on Membrane Lipids of Aspergillus niger: A Novel Route of Fungistasis , 2012, Current Microbiology.
[122] Jiulin Wang,et al. Polyacrylonitrile/graphene composite as a precursor to a sulfur-based cathode material for high-rate rechargeable Li–S batteries , 2012 .
[123] Arumugam Manthiram,et al. Orthorhombic Bipyramidal Sulfur Coated with Polypyrrole Nanolayers As a Cathode Material for Lithium–Sulfur Batteries , 2012 .
[124] L. Nazar,et al. Spherical ordered mesoporous carbon nanoparticles with high porosity for lithium-sulfur batteries. , 2012, Angewandte Chemie.
[125] Xiangyun Song,et al. Carbon nanofiber–sulfur composite cathode materials with different binders for secondary Li/S cells , 2012 .
[126] Guangbin Ji,et al. High-rate lithium-sulfur batteries promoted by reduced graphene oxide coating. , 2012, Chemical communications.
[127] Qian Zhang,et al. A hierarchical architecture S/MWCNT nanomicrosphere with large pores for lithium sulfur batteries. , 2012, Physical chemistry chemical physics : PCCP.
[128] J. Tübke,et al. High capacity vertical aligned carbon nanotube/sulfur composite cathodes for lithium-sulfur batteries. , 2012, Chemical communications.
[129] N. Bowden,et al. New class of biodegradable polymers formed from reactions of an inorganic functional group. , 2012, Macromolecules.
[130] Stuart J Rowan,et al. High-strength, healable, supramolecular polymer nanocomposites. , 2012, Journal of the American Chemical Society.
[131] Jun Liu,et al. A Soft Approach to Encapsulate Sulfur: Polyaniline Nanotubes for Lithium‐Sulfur Batteries with Long Cycle Life , 2012, Advanced materials.
[132] N. Bowden,et al. Synthesis of the first poly(diaminosulfide)s and an investigation of their applications as drug delivery vehicles. , 2012, Macromolecules.
[133] Krzysztof Matyjaszewski,et al. Self-Healing Polymer Films Based on Thiol-Disulfide Exchange Reactions and Self-Healing Kinetics Measured Using Atomic Force Microscopy , 2012 .
[134] J. Jeon,et al. Polyaniline/Vanadium Pentoxide Layer-by-Layer Electrodes for Energy Storage , 2012 .
[135] Stuart J. Rowan,et al. Influence of Metal Ion and Polymer Core on the Melt Rheology of Metallosupramolecular Films , 2012 .
[136] S. Rowan,et al. Structure–Property Relationships in Metallosupramolecular Poly(p-xylylene)s , 2012 .
[137] L. Nazar,et al. Graphene-enveloped sulfur in a one pot reaction: a cathode with good coulombic efficiency and high practical sulfur content. , 2012, Chemical communications.
[138] K. Char,et al. Elemental sulfur as a reactive medium for gold nanoparticles and nanocomposite materials. , 2011, Angewandte Chemie.
[139] Lei Wang,et al. Porous carbon nanofiber–sulfur composite electrodes for lithium/sulfur cells , 2011 .
[140] B. Sumerlin,et al. Dynamic-covalent macromolecular stars with boronic ester linkages. , 2011, Journal of the American Chemical Society.
[141] Ludwik Leibler,et al. Silica-Like Malleable Materials from Permanent Organic Networks , 2011, Science.
[142] Tomoya Higashihara,et al. Synthesis of Highly Refractive Poly(phenylene thioether) Derived from 2,4-Dichloro-6-alkylthio-1,3,5-triazines and Aromatic Dithiols , 2011 .
[143] Yi Cui,et al. Improving the performance of lithium-sulfur batteries by conductive polymer coating. , 2011, ACS nano.
[144] M. Buchmeiser,et al. Structure-Related Electrochemistry of Sulfur-Poly(acrylonitrile) Composite Cathode Materials for Rechargeable Lithium Batteries , 2011 .
[145] Jun Liu,et al. Optimization of mesoporous carbon structures for lithium–sulfur battery applications , 2011 .
[146] Tomoya Higashihara,et al. Synthesis and characterization of thianthrene-based poly(phenylene sulfide)s with high refractive index over 1.8 , 2011 .
[147] Chunsheng Wang,et al. Sulfur-impregnated disordered carbon nanotubes cathode for lithium-sulfur batteries. , 2011, Nano letters.
[148] Guangyuan Zheng,et al. Hollow carbon nanofiber-encapsulated sulfur cathodes for high specific capacity rechargeable lithium batteries. , 2011, Nano letters.
[149] Gérard Férey,et al. Cathode composites for Li-S batteries via the use of oxygenated porous architectures. , 2011, Journal of the American Chemical Society.
[150] Lin Lu,et al. Sulfur-graphene composite for rechargeable lithium batteries , 2011 .
[151] Z. Wen,et al. A nano-structured and highly ordered polypyrrole-sulfur cathode for lithiumsulfur batteries , 2011 .
[152] Yoshifumi Amamoto,et al. Reversible cross-linking of hydrophilic dynamic covalent polymers with radically exchangeable alkoxyamines in aqueous media , 2011 .
[153] L. Nazar,et al. High “C” rate Li-S cathodes: sulfur imbibed bimodal porous carbons , 2011 .
[154] S. Rowan,et al. Metallo-Responsive Liquid Crystalline Monomers and Polymers , 2011 .
[155] H. Dai,et al. Graphene-wrapped sulfur particles as a rechargeable lithium-sulfur battery cathode material with high capacity and cycling stability. , 2011, Nano letters.
[156] L. Archer,et al. Porous hollow carbon@sulfur composites for high-power lithium-sulfur batteries. , 2011, Angewandte Chemie.
[157] Z. Wen,et al. Preparation and characterization of sulfur–polypyrrole composites with controlled morphology as high capacity cathode for lithium batteries , 2011 .
[158] K. Becker,et al. Selective antimicrobial activity associated with sulfur nanoparticles. , 2011, Journal of biomedical nanotechnology.
[159] Xiulei Ji,et al. Stabilizing lithium-sulphur cathodes using polysulphide reservoirs. , 2011, Nature Communications.
[160] Jiulin Wang,et al. \{CNT\} enhanced sulfur composite cathode material for high rate lithium battery , 2011 .
[161] Justin R. Kumpfer,et al. Optically healable supramolecular polymers , 2011, Nature.
[162] Zhenguo Yang,et al. Sandwich-type functionalized graphene sheet-sulfur nanocomposite for rechargeable lithium batteries. , 2011, Physical chemistry chemical physics : PCCP.
[163] Li Li,et al. Sulfur/Polythiophene with a Core/Shell Structure: Synthesis and Electrochemical Properties of the Cathode for Rechargeable Lithium Batteries , 2011 .
[164] Yong Yang,et al. Poly(2,5-dihydroxy-1,4-benzoquinonyl sulfide) (PDBS) as a cathode material for lithium ion batteries , 2011 .
[165] Shuru Chen,et al. Ordered mesoporous carbon/sulfur nanocomposite of high performances as cathode for lithium–sulfur battery , 2011 .
[166] Weikun Wang,et al. Pig bone derived hierarchical porous carbon and its enhanced cycling performance of lithium–sulfur batteries , 2011 .
[167] Dipankar Chakravorty,et al. Surface-modified sulfur nanoparticles: an effective antifungal agent against Aspergillus niger and Fusarium oxysporum , 2011, Applied Microbiology and Biotechnology.
[168] Krzysztof Matyjaszewski,et al. Repeatable photoinduced self-healing of covalently cross-linked polymers through reshuffling of trithiocarbonate units. , 2011, Angewandte Chemie.
[169] M. Mackay,et al. A Supramolecular Polymer Based on Tweezer-Type π−π Stacking Interactions: Molecular Design for Healability and Enhanced Toughness , 2011 .
[170] Z. Qian,et al. The preparation of nano-sulfur/MWCNTs and its electrochemical performance , 2010 .
[171] C. Bowman,et al. Stress Relaxation by Addition-Fragmentation Chain Transfer in Highly Crosslinked Thiol-Yne Networks. , 2010, Macromolecules.
[172] L. Nazar,et al. Advances in Li–S batteries , 2010 .
[173] M. Zheng,et al. Preparation and performance of a core–shell carbon/sulfur material for lithium/sulfur battery , 2010 .
[174] Xueping Gao,et al. Enhancement of long stability of sulfur cathode by encapsulating sulfur into micropores of carbon spheres , 2010 .
[175] Jonathan Seppala,et al. A healable supramolecular polymer blend based on aromatic pi-pi stacking and hydrogen-bonding interactions. , 2010, Journal of the American Chemical Society.
[176] Jingang Liu,et al. Synthesis and characterization of organo-soluble thioether-bridged polyphenylquinoxalines with ultra-high refractive indices and low birefringences , 2010 .
[177] Tomoya Higashihara,et al. Highly refractive polymer resin derived from sulfur‐containing aromatic acrylate , 2010 .
[178] Tomoya Higashihara,et al. Highly Refractive Poly(phenylene thioether) Containing Triazine Unit , 2010 .
[179] K. Matyjaszewski,et al. Responsive Gels Based on a Dynamic Covalent Trithiocarbonate Cross-Linker , 2010 .
[180] Feng Wu,et al. Sulfur–Polythiophene Composite Cathode Materials for Rechargeable Lithium Batteries , 2010 .
[181] Brian J. Adzima,et al. Covalent Adaptable Networks (CANs): A Unique Paradigm in Crosslinked Polymers. , 2010, Macromolecules.
[182] Rajib Ghosh Chaudhuri,et al. Synthesis of sulfur nanoparticles in aqueous surfactant solutions. , 2010, Journal of colloid and interface science.
[183] Tomoya Higashihara,et al. Optically Transparent Sulfur-containing Semi-alicyclic Polyimide with High Refractive Index , 2010 .
[184] Atsushi Takahara,et al. A dynamic covalent polymer driven by disulfide metathesis under photoirradiation. , 2010, Chemical communications.
[185] Shinji Ando,et al. Synthesis and Characterization of Highly Refractive Polyimides Derived from Thiophene-Containing Aromatic Diamines and Aromatic Dianhydrides , 2010 .
[186] Jingang Liu,et al. Multi-Methyl-Substituted Polyphenylquinoxalines with High Solubility and High Glass Transition Temperatures: Synthesis and Characterization , 2010 .
[187] K. R. Seddon,et al. On the dissolution of non-metallic solid elements (sulfur, selenium, tellurium and phosphorus) in ionic liquids. , 2010, Chemical communications.
[188] Jingang Liu,et al. High refractive index polymers: fundamental research and practical applications , 2009 .
[189] S. Rowan,et al. Effect of monomer structure on the gelation of a class of metallo-supramolecular polymers , 2009 .
[190] Stuart J. Rowan,et al. A self-repairing, supramolecular polymer system: healability as a consequence of donor-acceptor pi-pi stacking interactions. , 2009, Chemical communications.
[191] Yoshifumi Amamoto,et al. Reorganizable chemical polymer gels based on dynamic covalent exchange and controlled monomer insertion , 2009 .
[192] Tomoya Higashihara,et al. Synthesis of highly refractive polyimides derived from 3,6‐bis(4‐aminophenylenesulfanyl)pyridazine and 4,6‐bis(4‐aminophenylenesulfanyl)pyrimidine , 2009 .
[193] C. Liang,et al. Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery , 2009 .
[194] S. Rowan,et al. Supramolecular Polymerizations and Main-Chain Supramolecular Polymers , 2009 .
[195] H. Otsuka,et al. Dynamic covalent polymers: Reorganizable polymers with dynamic covalent bonds , 2009 .
[196] L. Nazar,et al. A highly ordered nanostructured carbon-sulphur cathode for lithium-sulphur batteries. , 2009, Nature materials.
[197] Zhen Zhou,et al. Preparation and electrochemical properties of sulfur–acetylene black composites as cathode materials , 2009 .
[198] Hiroyuki Nishide,et al. Emerging N‐Type Redox‐Active Radical Polymer for a Totally Organic Polymer‐Based Rechargeable Battery , 2009 .
[199] Xinping Qiu,et al. Improvement of cycle property of sulfur-coated multi-walled carbon nanotubes composite cathode for lithium/sulfur batteries , 2009 .
[200] Christopher N Bowman,et al. Stress relaxation via addition-fragmentation chain transfer in a thiol-ene photopolymerization. , 2009, Macromolecules.
[201] Tomoya Higashihara,et al. Synthesis and characterization of highly refractive polyimides derived from 2,7-bis(4′-aminophenylenesulfanyl)thianthrene-5,5,10,10-tetraoxide and aromatic dianhydrides , 2009 .
[202] S. Rowan,et al. Control of gel morphology and properties of a class of metallo- supramolecular polymers by good/poor solvent environments , 2009 .
[203] Shichao Zhang,et al. Nano-wire networks of sulfur–polypyrrole composite cathode materials for rechargeable lithium batteries , 2008 .
[204] Hiroyuki Nishide,et al. Synthesis and Characterization of Radical-Bearing Polyethers as an Electrode-Active Material for Organic Secondary Batteries , 2008 .
[205] Shinji Ando,et al. Synthesis of High Refractive Index Polyimides Derived from 1,6-Bis(p-aminophenylsulfanyl)-3,4,8,9-tetrahydro-2,5,7,10-tetrathiaanthracene and Aromatic Dianhydrides , 2008 .
[206] M. Ueda,et al. Poly(thioether sulfone) with High Refractive Index and High Abbe's Number , 2008 .
[207] A. S. Deshpande,et al. Sulfur Nanoparticles Synthesis and Characterization from H2S Gas, Using Novel Biodegradable Iron Chelates in W/O Microemulsion , 2008, Nanoscale Research Letters.
[208] P. Cordier,et al. Self-healing and thermoreversible rubber from supramolecular assembly , 2008, Nature.
[209] Shinji Ando,et al. Synthesis and properties of highly refractive polyimides derived from fluorene‐bridged sulfur‐containing dianhydrides and diamines , 2008 .
[210] T. Meyer,et al. Catalysis: The art of splitting water , 2008, Nature.
[211] Jingang Liu,et al. Highly Refractive Polyimides Derived from 2,8-Bis(p-aminophenylenesulfanyl)dibenzothiophene and Aromatic Dianhydrides , 2008 .
[212] B. Trofimov,et al. Ethynedithiol‐based polyeneoligosulfides as active cathode materials for lithium‐sulfur batteries , 2008 .
[213] Jingang Liu,et al. Synthesis and characterization of highly refractive polyimides from 4,4′‐thiobis[(p‐phenylenesulfanyl)aniline] and various aromatic tetracarboxylic dianhydrides , 2007 .
[214] K. Nozaki,et al. Synthesis of sulfur-rich polymers: copolymerization of episulfide with carbon disulfide by using [PPN]Cl/(salph)Cr(III)Cl system. , 2007, Journal of the American Chemical Society.
[215] Jingang Liu,et al. Highly Refractive and Transparent Polyimides Derived from 4,4‘-[m-Sulfonylbis(phenylenesulfanyl)]diphthalic Anhydride and Various Sulfur-Containing Aromatic Diamines , 2007 .
[216] B. Currell,et al. Chemistry of the modification of sulphur by the use of dicyclopentadiene and of styrene , 2007 .
[217] T. Takata,et al. Synthesis of fluorene‐based high performance polymers. I. Poly(arylene thioether)s with excellent solubility and high refractive index , 2007 .
[218] Shinji Ando,et al. Synthesis and Characterization of High Refractive Index Polyimides Derived from 4,4′-( p -Phenylenedisulfanyl)dianiline and Various Aromatic Tetracarboxylic Dianhydrides , 2007 .
[219] Jingang Liu,et al. High refractive index polyimides derived from 2,7-Bis(4-aminophenylenesulfanyl) thianthrene and aromatic dianhydrides , 2007 .
[220] B. Trofimov,et al. Ethynedithiol oligomers as cathode components of lithium-sulfur batteries , 2007 .
[221] Hiroyuki Nishide,et al. Photocrosslinked nitroxide polymer cathode-active materials for application in an organic-based paper battery. , 2007, Chemical communications.
[222] Hiroyuki Nishide,et al. Cathode- and Anode-Active Poly(nitroxylstyrene)s for Rechargeable Batteries: p- and n-Type Redox Switching via Substituent Effects , 2007 .
[223] A. Tobolsky. Polymeric sulfur and related polymers , 2007 .
[224] Christopher N. Bowman,et al. Actuation in Crosslinked Polymers via Photoinduced Stress Relaxation , 2006 .
[225] S. Rowan,et al. Understanding the mechanism of gelation and stimuli-responsive nature of a class of metallo-supramolecular gels. , 2006, Journal of the American Chemical Society.
[226] Jun Chen,et al. Sulphur-polypyrrole composite positive electrode materials for rechargeable lithium batteries , 2006 .
[227] E. W. Meijer,et al. Cooperative End-to-End and Lateral Hydrogen-Bonding Motifs in Supramolecular Thermoplastic Elastomers , 2006 .
[228] S. Rowan,et al. Synthesis and Properties of Metallo-Supramolecular Poly(p-xylylene)s , 2006 .
[229] S. Rowan,et al. Synthesis and Properties of Metallo-Supramolecular Poly(p-phenylene ethynylene)s , 2006 .
[230] M. Mackay,et al. Utilization of a combination of weak hydrogen-bonding interactions and phase segregation to yield highly thermosensitive supramolecular polymers. , 2005, Journal of the American Chemical Society.
[231] S. Rowan,et al. Metal-ligand induced supramolecular polymerization: a route to responsive materials. , 2005, Faraday discussions.
[232] C. Bowman,et al. Photoinduced Plasticity in Cross-Linked Polymers , 2005, Science.
[233] S. Rowan,et al. Metal/Ligand-Induced Formation of Metallo-Supramolecular Polymers , 2005 .
[234] S. Rowan,et al. Synthesis and optical properties of metallo-supramolecular polymers. , 2005, Chemical communications.
[235] Yuriy V. Mikhaylik,et al. Li/S fundamental chemistry and application to high-performance rechargeable batteries , 2004 .
[236] Shigeyuki Iwasa,et al. Organic radical battery: nitroxide polymers as a cathode-active material , 2004 .
[237] Jingying Xie,et al. Lithium storage in conductive sulfur-containing polymers , 2004 .
[238] Yuriy V. Mikhaylik,et al. Polysulfide Shuttle Study in the Li/S Battery System , 2004 .
[239] S. Rowan,et al. Rheological behavior of shear-responsive metallo-supramolecular gels , 2004 .
[240] R. Steudel. Aqueous Sulfur Sols , 2004 .
[241] S. Rowan,et al. Multistimuli, multiresponsive metallo-supramolecular polymers. , 2003, Journal of the American Chemical Society.
[242] Sang-Cheol Han,et al. Effect of Multiwalled Carbon Nanotubes on Electrochemical Properties of Lithium/Sulfur Rechargeable Batteries , 2003 .
[243] Zhijun Ling,et al. Polymer lithium cells with sulfur composites as cathode materials , 2003 .
[244] Nansheng Xu,et al. Sulfur Composite Cathode Materials for Rechargeable Lithium Batteries , 2003 .
[245] H. Otsuka,et al. Polymer scrambling: macromolecular radical crossover reaction between the main chains of alkoxyamine-based dynamic covalent polymers. , 2003, Journal of the American Chemical Society.
[246] Ajit K. Mal,et al. New Thermally Remendable Highly Cross-Linked Polymeric Materials , 2003 .
[247] R. Steudel. The chemistry of organic polysulfanes R-S(n)-R (n > 2). , 2002, Chemical reviews.
[248] J. Shim,et al. The Lithium/Sulfur Rechargeable Cell Effects of Electrode Composition and Solvent on Cell Performance , 2002 .
[249] Naixin Xu,et al. A novel conductive polymer-sulfur composite cathode material for rechargeable lithium batteries , 2002 .
[250] Nansheng Xu,et al. Sulfur-carbon nano-composite as cathode for rechargeable lithium battery based on gel electrolyte , 2002 .
[251] Stuart J Rowan,et al. Dynamic covalent chemistry. , 2002, Angewandte Chemie.
[252] S. Nutt,et al. A Thermally Re-mendable Cross-Linked Polymeric Material , 2002, Science.
[253] N. Gusarova,et al. Sulfur-rich copolymers of sulfur with 5-vinylbicyclo[2.2.1]hept-2-ene and tricyclo[5.2.1.0 2.6]deca-3,8-diene as prospective cathode materials for lithium cells , 2002 .
[254] N. Oyama. Development of polymer‐based lithium secondary battery , 2000 .
[255] Noboru Oyama,et al. Lithium polymer battery with high energy density , 2000 .
[256] R. Steudel,et al. Preparation of Organic Polysulfanes R2Sn (n = 5, 7, 8, 9) from Sulfenyl Chlorides, RSCl, and Transition Metal Polysulfido Complexes , 2000 .
[257] R. Steudel,et al. A New Allotrope of Elemental Sulfur: Convenient Preparation of cyclo-S14 from S8. , 1998, Angewandte Chemie.
[258] A. S. Hay,et al. Copolymerization of elemental sulfur with cyclic(arylene disulfide) oligomers , 1997 .
[259] H. Allcock,et al. Polyphosphazenes with High Refractive Indices: Optical Dispersion and Molar Refractivity , 1997 .
[260] R. Steudel,et al. Sulfur Compounds, 199. Novel Titanocene Thiolato Complexes and Their Application in Preparing New Sulfur-Containing Heterocycles† , 1997 .
[261] A. S. Hay,et al. Preparation of poly(thioarylene)s from cyclic disulfide oligomers , 1997 .
[262] A. S. Hay,et al. Ring-opening polymerization study of cyclic (aromatic disulfide) oligomers derived from 4,4′-isopropylidene bisthiophenol , 1997 .
[263] N. Oyama,et al. An Organosulfur Polymer Cathode with a High Current Capability for Rechargeable Batteries , 1996 .
[264] A. S. Hay,et al. Cyclic Aromatic Disulfide Oligomers: Synthesis and Characterization , 1996 .
[265] A. S. Hay,et al. Novel synthesis of poly(p-phenylene sulfide) from cyclic disulfide oligomers , 1996 .
[266] N. Oyama,et al. Disulfide‐polyaniline composite cathodes for rechargeable batteries with high energy density , 1996 .
[267] N. Oyama,et al. Dimercaptan-polyaniline cathodes for lithium batteries : addition of a polypyrrole derivative for rapid charging , 1995 .
[268] H. Allcock,et al. Polyphosphazenes with High Refractive Indices: Synthesis, Characterization, and Optical Properties , 1995 .
[269] Samson A. Jenekhe,et al. Group contribution to molar refraction and refractive index of conjugated polymers , 1995 .
[270] N. Oyama,et al. Reactivation and Reduction of Electrochemically Inactivated Polyaniline by 2,5-Dimercapto-1,3,4-thiadiazole , 1995 .
[271] N. Oyama,et al. Dimercaptan–polyaniline composite electrodes for lithium batteries with high energy density , 1995, Nature.
[272] S. Jenekhe,et al. Effects of Structure on Refractive Index of Conjugated Polyimines , 1994 .
[273] N. Oyama,et al. Lithium Polymer Secondary Cell using Disulfide-Polyaniline Composite Cathode and Gel Electrolyte , 1993 .
[274] Thomas A. Moore,et al. Molecular mimicry of photosynthetic energy and electron transfer , 1993 .
[275] M. Doeff,et al. The Use of Polydisulfides and Copolymeric Disulfides in the Li/PEO/SRPE Battery System , 1992 .
[276] N. Oyama,et al. New organodisulfide—polyaniline composite cathode for secondary lithium battery , 1992 .
[277] M. Doeff,et al. Thin Film Rechargeable Room Temperature Batteries Using Solid Redox Polymerization Electrodes , 1992 .
[278] M. Doeff,et al. The use of redox polymerization electrodes in lithium batteries with liquid electrolytes , 1992 .
[279] Meilin Liu,et al. Novel Solid Redox Polymerization Electrodes Electrochemical Properties , 1991 .
[280] Meilin Liu,et al. Novel Solid Redox Polymerization Electrodes: All‐Solid‐State, Thin‐Film, Rechargeable Lithium Batteries , 1991 .
[281] Steven J. Visco,et al. A Novel Class of Organosulfur Electrodes for Energy Storage , 1989 .
[282] Y. Miyata,et al. Copolymerization of chloroprene with elemental sulphur. 1H n.m.r. study on the stereochemistry of the chloroprene unit adjacent to the sulphur unit , 1988 .
[283] Y. Miyata,et al. Copolymerization of chloroprene with elemental sulphur. 1H n.m.r. study on the sequence length of polysulphide linkages in the copolymer , 1988 .
[284] J. Brossas,et al. New synthesis of polysulfide polymers: kinetic study , 1987 .
[285] T. Pakkanen,et al. Ab initio study of hypervalent sulfur hydrides as model intermediates in the interconversion reactions of compounds containing sulfur-sulfur bonds , 1987 .
[286] A. Caplin,et al. Refractive index of molten sulphur , 1985 .
[287] J. Brossas,et al. Electron transfer and nucleophilic addition reactions of ω,ω′-dicarbanionic oligomers with elemental sulphur , 1984 .
[288] A. Duda,et al. Anionic polymerization of exo-3,4,5-trithiatetracyclo{5.5.1.O2,6.O8.12}tridec-10-ene (dicyclopentadiene trisulfide) , 1984 .
[289] R. Steudel,et al. Thermal Polymerization and Depolymerization Reactions of 10 Sulfur Allotropes Studied by HPLC and DSC [1] , 1984 .
[290] A. Duda,et al. Anionic polymerization of norbornene trisulfide (exo‐3,4,5‐trithia‐tricyclo[5.2.1.02.6]decane) , 1984 .
[291] Aziz Ahmed,et al. Copolymerization of elemental sulfur with styrene , 1984 .
[292] A. Duda,et al. Anionic Copolymerization of Elemental Sulfur with Propylene Sulfide. Equilibrium Sulfur Concentration , 1983 .
[293] J. Wheeler,et al. Free-radical concentration in doped sulfur. Theory and experiment , 1983 .
[294] R. Steudel. Homocyclic sulfur molecules , 1982 .
[295] F. Clouet,et al. Synthesis of polyphenylene polysulfur , 1981 .
[296] A. Duda,et al. Anionic copolymerization of elemental sulfur , 1981 .
[297] D. Griffiths,et al. POLYMERIZATION, DEPOLYMERIZATION AND DESULPHURIZATION OF A 1,2,3-TRITHIOLAN , 1980 .
[298] A. Duda,et al. Anionic copolymerisation of elemental sulfur with 2,2-dimethylthiirane , 1980 .
[299] E. Pearce,et al. Copolymerization of liquid sulfur with certain olefinic systems and structure-property studies on the polymeric materials† , 1980 .
[300] J. Brossas,et al. Investigations on the reaction of sulfur with carbanionic oligomers , 1979 .
[301] E. Pearce,et al. Kinetics of the base‐catalyzed reactions of cyclo‐octameric and catenapolymeric sulfur with dithiol , 1979 .
[302] K. Abraham,et al. A Lithium/Dissolved Sulfur Battery with an Organic Electrolyte , 1979 .
[303] E. Pearce,et al. Oligomeric alkenyl polysulfide: Synthesis and characterization by NMR analysis , 1978 .
[304] S. Schmitt,et al. A New Sulfur Modified Polychloroprene , 1978 .
[305] Max Schmidt,et al. Darstellung und Eigenschaften einiger Aus C ? S‐Sechs‐ bzw. ‐Achtringen gewonnener polymerer Verbindungen , 1978 .
[306] A. Duda,et al. Anionic copolymerisation of elemental sulphur , 1978, Nature.
[307] W. Mcbee,et al. Sulfur Utilization in Asphalt Paving Materials , 1978 .
[308] R. Campbell,et al. Sulfur Composites as Protective Coatings and Construction Materials , 1978 .
[309] A. Hackl,et al. A New Approach to Sulfur Concrete , 1978 .
[310] B. Meyer,et al. Wood-Sulfur Composites , 1978 .
[311] J. E. Gillott,et al. Characteristics of Some Sulfur-Bonded Civil Engineering Materials , 1978 .
[312] E. Pearce,et al. Plastic Sulfur Stabilization by Copolymerization of Sulfur with Dicyclopentadiene , 1978 .
[313] I. Deme. Sulfur as an Asphalt Diluent and a Mix Filler , 1978 .
[314] B. Currell,et al. Preparation and Properties of Modified Sulfur Systems , 1978 .
[315] L. J. Miller,et al. Sulfur-Asphalt Binder Technology for Pavements , 1978 .
[316] A. Williams,et al. Plasticization of Sulfur , 1975 .
[317] A. Williams,et al. Thermal analysis of elemental sulphur , 1974 .
[318] W. Klement. Study of the λ transition in liquid sulfur with a differential scanning calorimeter , 1974 .
[319] C. Krespan,et al. Fluorinated Sulfide Polymers , 1972 .
[320] G. W. Miller. Thermal analysis of polymers. VIII. Dilatometric and thermal optical behavior of sulfur , 1971 .
[321] T. C. Shields,et al. Active sulfuration of norbornenes , 1969 .
[322] E. Cairns,et al. High-temperature batteries. , 1969, Science.
[323] E. R. Bertozzi. Chemistry and Technology of Elastomeric Polysulfide Polymers , 1968 .
[324] A. Tobolsky,et al. The Dissociation Energy of the Tetrasulfide Linkage , 1965 .
[325] A. Tobolsky,et al. Urethane Elastomers Containing Disulfide and Tetrasulfide Linkages , 1964 .
[326] A. Tobolsky,et al. Relaxation of Disulfide and Tetrasulfide Polymers. , 1964 .
[327] B. Meyer. SOLID ALLOTROPES OF SULFUR , 1964 .
[328] Jen. Chiu. Visual Observation in Differential Thermal Analysis. , 1963 .
[329] A. Tobolsky,et al. The viscoelastic properties of crosslinked poly(ethylene tetrasulfide). I , 1963 .
[330] A. Tobolsky,et al. The viscoelastic properties of crosslinked poly(ethylene tetrasulfide) polymers. II , 1963 .
[331] C. Krespan,et al. Fluorinated Cyclic Polysulfides and Their Polymers , 1962 .
[332] A. L. Klebanskii,et al. Über den Reactionsmechanismus des Schwefels in der Polymerisation der Chloroprens und des Thiurams in der Destruktion und Strukturienung der Chloroprenpolymere , 1958 .
[333] A. Tobolsky. Equilibrium polymerization in the presence of an ionic initiator , 1957 .
[334] P. Bartlett,et al. Some experiments on sulfur as inhibitor for the polymerization of styrene , 1956 .
[335] P. Schenk. Zur Kenntnis der Schwefelmodifikationen , 1955 .
[336] G. Gee,et al. The polymerization of sulfur , 1955 .
[337] A. Woiwod. The inhibition of bacterial growth by colloidal heavy-metal sulphides and by colloidal sulphur. , 1954, Journal of general microbiology.
[338] R. R. Mellon,et al. Antibacterial effect of elemental sulfur. , 1953, The Journal of infectious diseases.
[339] P. Bartlett,et al. Some Inhibitors and Retarders in the Polymerization of Liquid Vinyl Acetate. II. 1,3,5-Trinitrobenzene and Sulfur1 , 1952 .
[340] W. E. Mochel. Structure of neoprene. V. Viscosity‐conversion relationships in sulfur‐modified polychloroprenes , 1952 .
[341] J. T. Weld,et al. THE ANTIBACTERIAL PROPERTIES OF SULFUR , 1947, The Journal of experimental medicine.
[342] A. Massey,et al. Inhibitory Action of Colloidal Sulphur in Corper's Agar on the Growth of Four Strains of Mycobacterium Tuberculosis Hominis. , 1936, American journal of public health and the nation's health.
[343] Kai Xie,et al. Graphene oxide wrapped hierarchical porous carbon–sulfur composite cathode with enhanced cycling and rate performance for lithium sulfur batteries , 2015 .
[344] Zhan Lin,et al. Lithium-Sulfur Batteries: from Liquid to Solid Cells? , 2015 .
[345] M. Oschatz,et al. ZnO Hard Templating for Synthesis of Hierarchical Porous Carbons with Tailored Porosity and High Performance in Lithium‐Sulfur Battery , 2015 .
[346] Jun Zhang,et al. Graphene-wrapped sulfur nanospheres with ultra-high sulfur loading for high energy density lithium–sulfur batteries , 2015 .
[347] A. Manthiram,et al. Low-cost, porous carbon current collector with high sulfur loading for lithium–sulfur batteries , 2014 .
[348] P. Costanzo,et al. Synthesis and evaluation of thermally-responsive coatings based upon Diels–Alder chemistry and renewable materials , 2014 .
[349] Jun Chen,et al. Composite of sulfur impregnated in porous hollow carbon spheres as the cathode of Li-S batteries with high performance , 2012, Nano Research.
[350] S. Rowan,et al. Using the dynamic bond to access macroscopically responsive structurally dynamic polymers. , 2011, Nature materials.
[351] Jin-Woo Park,et al. The electrochemical properties of lithium/sulfur cell using sulfur-carbon nanotubes composite. , 2011, Journal of nanoscience and nanotechnology.
[352] Christoph Weder,et al. Light-activated healing of metallosupramolecular polymers. , 2011, Chimia.
[353] B. Sumerlin,et al. Future perspectives and recent advances in stimuli-responsive materials , 2010 .
[354] Justin R. Kumpfer,et al. Stimuli-responsive europium-containing metallo-supramolecular polymers , 2010 .
[355] R. Steudel. Inorganic Polysulfides S n 2− and Radical Anions S n ·− , 2003 .
[356] B. Eckert,et al. Molecular Spectra of Sulfur Molecules and Solid Sulfur Allotropes , 2003 .
[357] R. Steudel. Sulfur-Rich Oxides S n O and S n O 2 ( n >1) , 2003 .
[358] B. Eckert,et al. Solid Sulfur Allotropes , 2003 .
[359] R. Steudel. Inorganic Polysulfanes H 2 S n with n > 1 , 2003 .
[360] B. Eckert,et al. Solid Sulfur Allotropes Sulfur Allotropes , 2003 .
[361] R. Steudel. Liquid Sulfur Liquid Sulfur , 2003 .
[362] J. Ober. Materials flow of sulfur , 2002 .
[363] R. Gaudiana,et al. Design and Synthesis of High Refractive Index Polymers. II , 1992 .
[364] L. Koch,et al. Quantitative HPLC Analysis and Thermodynamics of Sulfur Melts , 1985 .
[365] R. Steudel,et al. Convenient preparation of cyclo-eicosasulphur (S20) from bis(η-cyclopentadienyl)(pentasulphido)titanium(IV) , 1984 .
[366] Emanuel Peled,et al. Electrochemistry of a nonaqueous lithium/sulfur cell , 1983 .
[367] A. Duda,et al. Anionic copolymerization of elemental sulfur with propylene sulfide , 1982 .
[368] Theodore L. Brown. Chemistry: The Central Science , 1981 .
[369] G. Odian,et al. Principles of polymerization , 1981 .
[370] J. Brossas,et al. Action of elementary sulfur onto carbanions : a new route to dialkylpolysulfides , 1980 .
[371] J. Emsley,et al. The synthesis and spectra of polycyclic 1,2,3-trithiolans , 1979 .
[372] P. A. Kirpichnikov. The syntheses and chemical reactions of some reactive oligomers , 1979 .
[373] Max Schmidt,et al. Copolymerization of Tetrameric Thioformaldehyde with Oligomeric Thioformaldehydes, Substituted Analogs, or Sulfur , 1978 .
[374] J. E. Bailey,et al. Sulfur‐Containing Polymers , 1977 .
[375] H. Fritz,et al. 2,3,4-trithiabicyclo[4,3,1]deca-6,8-diene. Sulfuration of cycloheptatriene , 1974 .
[376] J. L. Kice. Inhibition of polymerization. II. Methyl acrylate , 1956 .
[377] G. Gee. The molecular complexity of sulphur in the liquid and vapour , 1952 .
[378] F. W. Shipley,et al. 298. The reaction of sulphur and sulphur compounds with olefinic substances. Part I. The reaction of sulphur with mono-olefins and with Δ1 : 5-diolefins , 1947 .
[379] V. Lamer,et al. Monodispersed hydrophobic colloidal dispersions and light scattering properties. I. Preparation and light scattering properties of monodispersed colloidal sulfur , 1946 .
[380] J. C. Patrick. The formation of high polymers by condensation between metallic poly-sulphides and dihalogenated hydrocarbons and ethers , 1936 .
[381] H. A. Lorentz. Ueber die Beziehung zwischen der Fortpflanzungsgeschwindigkeit des Lichtes und der Körperdichte , 1880 .
[382] L. Lorenz. Ueber die Refractionsconstante , 1880 .