Variation of surface and bonding properties among four wood species induced by a high voltage electrostatic field (HVEF)

Abstract A high voltage electrostatic field (HVEF) was applied to enhance the bonding performance of wood composites prepared with phenol-formaldehyde (PF) adhesive and different wood species and radial cut combinations. Four wood species including Masson pine (Pinus massoniana), Chinese fir (Cunninghamia lanceolata), poplar (Populus tomentosa) and ayous (Triplochiton scleroxylon) were studied. The results of HVEF-treatment turn out to be species-dependent, and are related to the anatomical and chemical properties of wood. It was demonstrated by a statistical approach that the lignin content is the most significant parameter with a good correlation coefficient (R2 > 0.8). High lignin content leads to high free radical concentration at the wood surface and the HVEF enhanced the adhesive penetration depth, the maximal density and the bonding strength (Bst) at the interphase. On the contrary, high extract contents and large lumina diameters negatively impacted the surface modification by HVEF. The magnitude of the effects was in the following order: ayous < poplar < Masson pine < Chinese fir.

[1]  H. Zhang,et al.  Influence of high voltage electrostatic field (HVEF) on bonding characteristics of Masson (Pinus massoniana Lamb.) veneer composites , 2018, European Journal of Wood and Wood Products.

[2]  Jianxiong Lu,et al.  Influence of hygrothermal condition on dynamic viscoelasticity of Chinese fir (Cunninghamia lanceolata). Part 2: moisture desorption , 2018 .

[3]  Jianxiong Lu,et al.  Influence of hygrothermal condition on dynamic viscoelasticity of Chinese fir (Cunninghamia lanceolata). Part 1: moisture adsorption , 2018 .

[4]  C. Dai,et al.  The effect of high voltage electrostatic field (HVEF) treatment on bonding interphase characteristics among different wood sections of Masson pine (Pinus massoniana Lamb.) , 2018 .

[5]  H. Zhang,et al.  The study of linear vibrational welding of moso bamboo , 2018 .

[6]  A. Pizzi,et al.  Study of the End-grain Butt Joints Obtained by Friction Welding of Moso Bamboo , 2017 .

[7]  T. Nguyen,et al.  Wettability modification of heat-treated wood (HTW) via cold atmospheric-pressure nitrogen plasma jet (APPJ) , 2017 .

[8]  Hui Peng,et al.  Viscoelastic Properties of the Chinese Fir (Cunninghamia lanceolata) during Moisture Sorption Processes Determined by Harmonic Tests , 2016, Materials.

[9]  J. Nairn,et al.  Assessing the role of adhesives in durability of laminated veneer lumber (LVL) by fracture mechanics , 2016 .

[10]  Jianxiong Lu,et al.  Dynamic viscoelastic properties of Chinese fir (Cunninghamia lanceolata) during moisture desorption processes , 2016 .

[11]  M. Beyer,et al.  Quality assessment of glued ash wood for construction engineering , 2015, European Journal of Wood and Wood Products.

[12]  P. Saranpää,et al.  The influence of felling season and log-soaking temperature on the wetting and phenol formaldehyde adhesive bonding characteristics of birch veneer , 2014 .

[13]  Z. Zhong,et al.  Evaluating of bonding strength of pine, oak and nyatoh wood species related to their surface roughness , 2014 .

[14]  G. Avramidis,et al.  Effect of plasma treatment on cell-wall adhesion of urea-formaldehyde resin revealed by nanoindentation , 2014 .

[15]  K. Murata,et al.  Effect of Thermal Treatment on Fracture Properties and Adsorption Properties of Spruce Wood , 2013, Materials.

[16]  J. Miljković,et al.  Influence of the viscosity of UF resins on the radial and tangential penetration into poplar wood and on the shear strength of adhesive joints , 2012 .

[17]  R. Santana,et al.  Thermal decomposition of wood: influence of wood components and cellulose crystallite size. , 2012, Bioresource technology.

[18]  K. Liew,et al.  Effect of extraction solvent on mechanical properties of particleboard produced from cultivated Acacia hybrid , 2011, Journal of the Indian Academy of Wood Science.

[19]  F. Carlo,et al.  Comparative analysis of a wood: adhesive bondline , 2011, Wood Science and Technology.

[20]  J. Konnerth,et al.  Macro- and micromechanical characterization of wood-adhesive bonds exposed to alternating climate conditions , 2010 .

[21]  W. Sandermann,et al.  Chemische Untersuchungen über die thermische Zersetzung von Holz—Zweite Mitteilung: Untersuchungen mit Hilfe der Differential-Thermo-Analyse , 1963, Holz als Roh- und Werkstoff.

[22]  Seung‐Hwan Lee,et al.  Adhesive penetration of wood cell walls investigated by scanning thermal microscopy (SThM) , 2007 .

[23]  N. Yan,et al.  Effect of wood species and molecular weight of phenolic resins on curing behavior and bonding development , 2005 .

[24]  C. Felby,et al.  Native lignin for bonding of fiber boards—evaluation of bonding mechanisms in boards made from laccase-treated fibers of beech (Fagus sylvatica) , 2004 .

[25]  I. Sakata,et al.  Effect of corona discharge treatment on cellulose prepared from beech wood , 1990 .

[26]  W. Feist,et al.  Free radical formation in wood: the role of water. , 1981 .