Organic solar cells: Their developments and potentials

Abstract This paper aims to review the developments and the potentials of organic photovoltaic, which has caught the attention of researchers of optoelectronics. The paper briefly introduces the physics underlying organic photovoltaic devices of donor–acceptor interfaces. It examines a variety of materials and architectures that benefit the performance of the organic photovoltaic cell; along with the important photogeneration factors including the exciton diffusion length as well as charge transport, separation, and collection. The authors have reviewed the recent understanding of the mechanisms that govern these photocurrent generation steps and sketched out the search for alternative materials and device architectures. The review also discusses areas where active researches should be directed for cell efficiency improvement and outlines the issues to be resolved in order to speed up the commercialization.

[1]  Chang Ming Li,et al.  Degradation of small-molecule organic solar cells , 2006 .

[2]  Melvin Calvin,et al.  Photovoltaic Effect and Photoconductivity in Laminated Organic Systems , 1958 .

[3]  Ken-Tsung Wong,et al.  Device Engineering for Highly Efficient Top‐Illuminated Organic Solar Cells with Microcavity Structures , 2012, Advanced materials.

[4]  Martijn Lenes,et al.  Small Bandgap Polymers for Organic Solar Cells (Polymer Material Development in the Last 5 Years) , 2008 .

[5]  C. Weder,et al.  Uniaxial Orientation of Columnar Discotic Liquid Crystals , 2002 .

[6]  Roland Hany,et al.  Woven electrodes for flexible organic photovoltaic cells. , 2011, Advanced materials.

[7]  F. Krebs,et al.  Low band gap polymers for organic photovoltaics , 2007 .

[8]  P. Schuhmacher,et al.  Fast photoconduction in the highly ordered columnar phase of a discotic liquid crystal , 1994, Nature.

[9]  Jan C Hummelen,et al.  Accurate measurement of the exciton diffusion length in a conjugated polymer using a heterostructure with a side-chain cross-linked fullerene layer. , 2005, The journal of physical chemistry. A.

[10]  Stephen R. Forrest,et al.  Efficient bulk heterojunction photovoltaic cells using small-molecular-weight organic thin films , 2003, Nature.

[11]  Alan J. Heeger,et al.  Charge separation and photovoltaic conversion in polymer composites with internal donor/acceptor heterojunctions , 1995 .

[12]  Xiong Gong,et al.  Thermally Stable, Efficient Polymer Solar Cells with Nanoscale Control of the Interpenetrating Network Morphology , 2005 .

[13]  Andreas F. Meyer,et al.  Long‐term stability of dye‐sensitised solar cells , 2001 .

[14]  Ta Chih Cheng,et al.  Light-emitting diodes--Their potential in biomedical applications , 2010 .

[15]  T. Emrick,et al.  Donor−Acceptor Poly(thiophene-block-perylene diimide) Copolymers: Synthesis and Solar Cell Fabrication , 2009 .

[16]  Martin A. Green,et al.  Clean electricity from photovoltaics , 2001 .

[17]  Christopher D. Simpson,et al.  From graphite molecules to columnar superstructures - an exercise in nanoscience , 2004 .

[18]  Frederik C. Krebs,et al.  Life cycle assessment of ITO-free flexible polymer solar cells prepared by roll-to-roll coating and printing , 2012 .

[19]  S. Forrest,et al.  Organic solar cells with sensitivity extending into the near infrared , 2005 .

[20]  A. Teja,et al.  Tuning the Electronic Structure and Solubility of Conjugated Polymers with Perfluoroalkyl Substituents: Poly(3‐perfluorooctylthiophene), the First Supercritical CO2‐soluble Conjugated Polymer , 2004 .

[21]  Hui Jin,et al.  Efficient, Large Area ITO‐and‐PEDOT‐free Organic Solar Cell Sub‐modules , 2012, Advanced materials.

[22]  N. T. Harrison,et al.  Electronic Processes of Conjugated Polymers in Semiconductor Device Structures , 1997 .

[23]  K. Awazu,et al.  Change of Liquid‐Crystal Domains by Vibrational Excitation for a Columnar Mesophase , 2000 .

[24]  Christoph J. Brabec,et al.  Design Rules for Donors in Bulk‐Heterojunction Solar Cells—Towards 10 % Energy‐Conversion Efficiency , 2006 .

[25]  Raj René Janssen,et al.  Synthesis and characterization of a low bandgap conjugated polymer for bulk heterojunction photovoltaic cells , 2001 .

[26]  Jenny Nelson Organic photovoltaic films , 2002 .

[27]  T. Swager,et al.  Conjugated polymer-based chemical sensors. , 2000, Chemical reviews.

[28]  R. Nolte,et al.  Mastering molecular matter. Supramolecular architectures by hierarchical self-assembly , 2003 .

[29]  C. Tang Two‐layer organic photovoltaic cell , 1986 .

[30]  Hans-Werner Schmidt,et al.  Combinatorial study of the long-term stability of organic thin-film solar cells , 2002 .

[31]  Gang Li,et al.  Fused silver nanowires with metal oxide nanoparticles and organic polymers for highly transparent conductors. , 2011, ACS nano.

[32]  J. Hummelen,et al.  Polymer Photovoltaic Cells: Enhanced Efficiencies via a Network of Internal Donor-Acceptor Heterojunctions , 1995, Science.

[33]  T. Jimbo,et al.  Improvement in light harvesting and performance of P3HT:PCBM solar cell by using 9,10-diphenylanthracene , 2009 .

[34]  E. Kymakis,et al.  High open-circuit voltage photovoltaic devices from carbon-nanotube-polymer composites , 2003 .

[35]  Yang Yang,et al.  High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends , 2005 .

[36]  Jurjen Wildeman,et al.  Simultaneous enhancement of charge transport and exciton diffusion in poly(p-phenylene vinylene) derivatives , 2005 .

[37]  Carl M. Lampert,et al.  Editorial: Reporting solar cell efficiencies in Solar Energy Materials and Solar Cells , 2008 .

[38]  Stephen R. Forrest,et al.  Small molecular weight organic thin-film photodetectors and solar cells , 2003 .

[39]  C. Brabec,et al.  INFRARED SPECTROELECTROCHEMICAL INVESTIGATIONS ON THE DOPING OF SOLUBLE POLY(ISOTHIANAPHTHENE METHINE) (PIM) , 1999 .

[40]  David L Carroll,et al.  Meso-structure formation for enhanced organic photovoltaic cells. , 2005, Organic letters.

[41]  Shijun Jia,et al.  Polymer–Fullerene Bulk‐Heterojunction Solar Cells , 2009, Advanced materials.

[42]  R. Koeppe,et al.  Enhancing photon harvesting in organic solar cells with luminescent concentrators , 2007 .

[43]  Jan Genoe,et al.  Solar cells utilizing small molecular weight organic semiconductors , 2007 .

[44]  Jong-ho Yoon,et al.  Practical application of building integrated photovoltaic (BIPV) system using transparent amorphous silicon thin-film PV module , 2011 .

[45]  Frederik C. Krebs,et al.  Out-door testing and long-term stability of plastic solar cells , 2006 .

[46]  C. J. M. Emmott,et al.  Environmental and economic assessment of ITO-free electrodes for organic solar cells , 2012 .

[47]  Raj René Janssen,et al.  Low-bandgap polymer photovoltaic cells , 2001 .

[48]  Henning Sirringhaus,et al.  A Zone‐Casting Technique for Device Fabrication of Field‐Effect Transistors Based on Discotic Hexa‐peri‐hexabenzocoronene , 2005 .

[49]  M. Green Third generation photovoltaics : advanced solar energy conversion , 2006 .

[50]  Martin A. Green,et al.  Third generation photovoltaics: Ultra‐high conversion efficiency at low cost , 2001 .

[51]  Markus Hösel,et al.  Roll-to-roll fabrication of polymer solar cells , 2012 .

[52]  Donal D. C. Bradley,et al.  Spin‐ and Spray‐Deposited Single‐Walled Carbon‐Nanotube Electrodes for Organic Solar Cells , 2010 .

[53]  S. Forrest,et al.  Controlled growth of a molecular bulk heterojunction photovoltaic cell , 2004 .

[54]  S. Y. Kim,et al.  Extension of stability in organic photovoltaic cells using UV/ozone-treated graphene sheets , 2013 .

[55]  W. R. Salaneck,et al.  Effect of interfaces on the alignment of a discotic liquid-crystalline phthalocyanine. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[56]  P. Heremans,et al.  Strategies for increasing the efficiency of heterojunction organic solar cells: material selection and device architecture. , 2009, Accounts of chemical research.

[57]  C. A. Walsh,et al.  Efficient photodiodes from interpenetrating polymer networks , 1995, Nature.

[58]  H. Pettersson,et al.  Nanocrystalline dye‐sensitized solar cells having maximum performance , 2007 .

[59]  Mikkel Jørgensen,et al.  Printed metal back electrodes for R2R fabricated polymer solar cells studied using the LBIC technique , 2011 .

[60]  Wojciech Pisula,et al.  Uniaxial alignment of the columnar super-structure of a hexa (alkyl) hexa-peri-hexabenzocoronene on untreated glass by simple solution processing. , 2003, Journal of the American Chemical Society.

[61]  N. T. Harrison,et al.  Electronic excitations in luminescent conjugated polymers , 1997 .

[62]  Peng Wang,et al.  Stable New Sensitizer with Improved Light Harvesting for Nanocrystalline Dye‐Sensitized Solar Cells , 2004 .

[63]  Neil C Greenham,et al.  Polymer solar cells , 2013, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[64]  K. Leo,et al.  Small-molecule solar cells—status and perspectives , 2008, Nanotechnology.

[65]  Zhibin Yu,et al.  Silver Nanowire‐Polymer Composite Electrodes for Efficient Polymer Solar Cells , 2011, Advanced materials.

[66]  Frederik C. Krebs,et al.  Significant Improvement of Polymer Solar Cell Stability , 2005 .

[67]  Mats Andersson,et al.  Laminated fabrication of polymeric photovoltaic diodes , 1998, Nature.

[68]  Barry P Rand,et al.  Near-infrared sensitive small molecule organic photovoltaic cells based on chloroaluminum phthalocyanine , 2007 .

[69]  David L. Carroll,et al.  High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1- phenyl-(6,6)C61 blends , 2005 .

[70]  F. Krebs,et al.  Lifetimes of organic photovoltaics: Using TOF-SIMS and 18O2 isotopic labelling to characterise chemical degradation mechanisms , 2006 .

[71]  Ronn Andriessen,et al.  ITO-free flexible organic solar cells with printed current collecting grids , 2011 .

[72]  E. Kymakis,et al.  Photovoltaic cells based on dye-sensitisation of single-wall carbon nanotubes in a polymer matrix , 2003 .

[73]  F. Krebs,et al.  Lifetimes of organic photovoltaics: Combining chemical and physical characterisation techniques to study degradation mechanisms , 2006 .

[74]  O. Bunk,et al.  Induced alignment of a solution-cast discotic hexabenzocoronene derivative for electronic devices investigated by surface X-ray diffraction. , 2003, Journal of the American Chemical Society.

[75]  F. Krebs,et al.  Oxygen Release and Exchange in Niobium Oxide MEHPPV Hybrid Solar Cells , 2006 .

[76]  E. W. Meijer,et al.  About Supramolecular Assemblies of π-Conjugated Systems , 2005 .

[77]  A. Heeger,et al.  Fine tuning of the band gap in conjugated polymers via control of block copolymer sequences , 1992 .

[78]  Frederik C. Krebs,et al.  Simple roll coater with variable coating and temperature control for printed polymer solar cells , 2012 .

[79]  J. Fréchet,et al.  Polymer-fullerene composite solar cells. , 2008, Angewandte Chemie.

[80]  Christoph J. Brabec,et al.  Organic photovoltaics : concepts and realization , 2003 .

[81]  Christoph J. Brabec,et al.  Organic photovoltaics: technology and market , 2004 .

[82]  Naichia Yeh,et al.  High-brightness LEDs—Energy efficient lighting sources and their potential in indoor plant cultivation , 2009 .

[83]  Han‐Ki Kim,et al.  Transparent and flexible PEDOT:PSS electrodes passivated by thin IZTO film using plasma-damage free linear facing target sputtering for flexible organic solar cells , 2013 .

[84]  F. Krebs,et al.  Stability/degradation of polymer solar cells , 2008 .

[85]  H. Chan,et al.  dc bias-induced dielectric anomalies in -oriented 0.9Pb(Mg[sub ⅓]Nb[sub ⅔]O₃)-0.1PbTiO₃ single crystals , 2006 .

[86]  G. Fredrickson,et al.  Block Copolymers—Designer Soft Materials , 1999 .

[87]  Frederik C. Krebs,et al.  All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps , 2009 .

[88]  M. Thelakkat,et al.  Crystalline-crystalline donor-acceptor block copolymers. , 2008, Angewandte Chemie.

[89]  Benjamin C. K. Tee,et al.  Stretchable Organic Solar Cells , 2011, Advanced materials.

[90]  Yi-Kai Lin,et al.  Modified buffer layers for polymer photovoltaic devices , 2007 .

[91]  D. Bradley,et al.  Efficient Organic Solar Cells with Solution‐Processed Silver Nanowire Electrodes , 2011, Advanced materials.

[92]  Chunhui Huang,et al.  Small-molecule organic solar cells with improved stability , 2005 .

[93]  Christian A. Martin,et al.  Large area liquid crystal monodomain field-effect transistors. , 2006, Journal of the American Chemical Society.

[94]  F. Krebs,et al.  Hybrid solar cells based on MEH-PPV and thin film semiconductor oxides (TiO2, Nb2O5, ZnO, CeO2 and CeO2–TiO2): Performance improvement during long-time irradiation , 2006 .

[95]  Bernard Kippelen,et al.  Encapsulation of pentacene/C60 organic solar cells with Al2O3 deposited by atomic layer deposition , 2007 .

[96]  Valentin D. Mihailetchi,et al.  Ultimate efficiency of polymer/fullerene bulk heterojunction solar cells , 2006 .

[97]  Shui-Yang Lien,et al.  Innovation and fabrication of 5.5 generation image‐patterned translucent photovoltaic module by using laser scribing technology , 2013 .