Optimization of Carbon Nanotube Growth via Response Surface Methodology for Fischer-Tropsch Synthesis over Fe/CNT Catalyst

[1]  Chao Sun,et al.  Chemical and structural properties of Na decorated Fe5C2-ZnO catalysts during hydrogenation of CO2 to linear α-olefins , 2021 .

[2]  M. Ding,et al.  Biosugarcane-based carbon support for high-performance iron-based Fischer-Tropsch synthesis , 2021, iScience.

[3]  K. Lee,et al.  Mass transfer enhanced CaO pellets for CO2 sorption: Utilization of CO2 emitted from CaCO3 pellets during calcination , 2021 .

[4]  M. Virginie,et al.  Active phases for high temperature Fischer-Tropsch synthesis in the silica supported iron catalysts promoted with antimony and tin , 2021 .

[5]  Raja Thirumalaiswamy,et al.  Promoted mesoporous Fe-alumina catalysts for the non-oxidative dehydrogenation of isobutane , 2021 .

[6]  Jun Li,et al.  Facile Synthesis of AgFeO2-Decorated CaCO3 with Enhanced Catalytic Activity in Activation of Peroxymonosulfate for Efficient Degradation of Organic Pollutants , 2021 .

[7]  J. Prakash,et al.  Artificial neural network, Pareto optimization, and Taguchi analysis for the synthesis of single-walled carbon nanotubes , 2021 .

[8]  Heon Jung,et al.  Indirect coal liquefaction by integrated entrained flow gasification and Rectisol/Fischer–Tropsch processes for producing automobile diesel substitutes , 2020 .

[9]  E. Eddings,et al.  Effect of copper on highly effective Fe-Mn based catalysts during production of light olefins via Fischer-Tropsch process with low CO2 emission , 2020 .

[10]  M. Srinivasan,et al.  Taguchi optimization design of diameter-controlled synthesis of multi walled carbon nanotubes for the adsorption of Pb(II) and Ni(II) from chemical industry wastewater. , 2020, Chemosphere.

[11]  Cheng Zhou,et al.  Size and promoter effects on iron nanoparticles confined in carbon nanotubes and their catalytic performance in light olefin synthesis from syngas , 2020 .

[12]  A. Dalai,et al.  Effects of promoters (Mn, Mg, Co and Ni) on the Fischer-Tropsch activity and selectivity of KCuFe/mesoporous-alumina catalyst , 2020 .

[13]  M. Dušek,et al.  Synthesis new Co–Mn mixed oxide catalyst for the production of light olefins by tuning the catalyst structure , 2020 .

[14]  Y. Millot,et al.  Fischer-Tropsch reaction on Co-containing microporous and mesoporous Beta zeolite catalysts: the effect of porous size and acidity , 2020 .

[15]  E. Rytter,et al.  Fischer-Tropsch synthesis over an alumina-supported cobalt catalyst in a fixed bed reactor – Effect of process parameters , 2020 .

[16]  S. Hong,et al.  Enhanced mechanical and wear properties of Al6061 alloy nanocomposite reinforced by CNT-template-grown core–shell CNT/SiC nanotubes , 2020, Scientific Reports.

[17]  K. Maslakov,et al.  Fischer-Tropsch synthesis over carbon-encapsulated cobalt and iron nanoparticles embedded in 3D-framework of carbon nanotubes , 2020 .

[18]  Yong Yang,et al.  Mesoporous Iron Oxide Nanoparticle-Decorated Graphene Oxide Catalysts for Fischer–Tropsch Synthesis , 2020, ACS Applied Nano Materials.

[19]  M. Luo,et al.  Fischer-Tropsch synthesis: Effect of nitric acid pretreatment on graphene-supported cobalt catalyst , 2020, Applied Catalysis A: General.

[20]  A. Bonilla-Petriciolet,et al.  Adsorption of hazardous dyes on functionalized multiwalled carbon nanotubes in single and binary systems: Experimental study and physicochemical interpretation of the adsorption mechanism , 2020, Chemical Engineering Journal.

[21]  Shirun Yan,et al.  Iron–Potassium on Single-Walled Carbon Nanotubes as Efficient Catalyst for CO2 Hydrogenation to Heavy Olefins , 2020 .

[22]  D. Lennon,et al.  The Application of Quasi-Elastic Neutron Scattering to Investigate Hydrogen Diffusion in an Iron-Based Fischer–Tropsch Synthesis Catalyst , 2020, Topics in Catalysis.

[23]  Seung Ju Han,et al.  Mesoporous carbon as an effective support for Fe catalyst for CO2 hydrogenation to liquid hydrocarbons , 2020 .

[24]  B. Weckhuysen,et al.  Cobalt nanocrystals on carbon nanotubes in the Fischer-Tropsch synthesis: Impact of support oxidation , 2020 .

[25]  Xinggui Zhou,et al.  Crucial roles of support modification and promoter introduction in Fe/CNT catalyzed syngas conversion to lower olefins , 2020 .

[26]  Zhenhua Li,et al.  Highly efficient iron based MOFs mediated catalysts for Fischer–Tropsch synthesis: Effect of reduction atmosphere , 2020 .

[27]  S. Abo-El-Enein,et al.  Dual growth of graphene nanoplatelets and carbon nanotubes hybrid structure via chemical vapor deposition of methane over Fe–MgO catalysts , 2020 .

[28]  W. Ying,et al.  High-Temperature Fischer–Tropsch Synthesis of Light Olefins over Nano-Fe3O4@MnO2 Core–Shell Catalysts , 2019, Industrial & Engineering Chemistry Research.

[29]  Heon Jung,et al.  Phase-controlled synthesis of thermally stable nitrogen-doped carbon supported iron catalysts for highly efficient Fischer-Tropsch synthesis , 2019, Nano Research.

[30]  Xiaohao Liu,et al.  Insight into the Intrinsic Active Site for Selective Production of Light Olefins in Cobalt-Catalyzed Fischer–Tropsch Synthesis , 2019, ACS Catalysis.

[31]  S. Chowdhury,et al.  Highly porous carboxylated activated carbon from jute stick for removal of Pb2+ from aqueous solution , 2019, Environmental science and pollution research international.

[32]  Jun Yue,et al.  Effect of a potassium promoter on the Fischer–Tropsch synthesis of light olefins over iron carbide catalysts encapsulated in graphene-like carbon , 2019, Catalysis Science & Technology.

[33]  Dailin Li,et al.  Zirconium Doped Precipitated Fe-Based Catalyst for Fischer–Tropsch Synthesis to Light Olefins at Industrially Relevant Conditions , 2019, Catalysis Letters.

[34]  F. Du,et al.  Thermal conductivity of carbon nanotubes grown by catalyst-free chemical vapor deposition in nanopores , 2019, Carbon.

[35]  M. Koç,et al.  Oxidative acid treatment of carbon nanotubes , 2019, Surfaces and Interfaces.

[36]  A. Mirzaei,et al.  Effect of temperature on deactivation models of alumina supported iron catalyst during Fischer-Tropsch synthesis , 2019, Petroleum Science and Technology.

[37]  N. Kruse,et al.  Discovery of a Fischer‐Tropsch Hybrid Reaction: Hydrogenation of Methylformate to Long‐Chain Hydrocarbons with Anderson‐Schulz‐Flory Chain Length Distribution , 2019, ChemCatChem.

[38]  H. Roghani‐Mamaqani,et al.  Preparation of carbon nanotube and polyurethane‐imide hybrid composites by sol–gel reaction , 2018, Polymer Composites.

[39]  Jaeyun Kim,et al.  Synthesis of high-quality carbon nanotubes by using monodisperse spherical mesoporous silica encapsulating iron oxide nanoparticles , 2018, Korean Journal of Chemical Engineering.

[40]  Xiaoming Peng,et al.  Preparation of Carbon Nanotubes/Polyurethane Hybrids as a Synergistic Absorbent for Efficient Oil/Water Separation , 2018, Fibers And Polymers.

[41]  P. A. Ajibade,et al.  Synthesis and surface functionalization of multi-walled carbon nanotubes with imidazolium and pyridinium-based ionic liquids: Thermal stability, dispersibility and hydrophobicity characteristics , 2018, Journal of Molecular Liquids.

[42]  V. Kuznetsov,et al.  Co metal nanoparticles deposition inside or outside multi-walled carbon nanotubes via facile support pretreatment , 2018, Applied Surface Science.

[43]  D. Filimonov,et al.  Effects of the promotion with bismuth and lead on direct synthesis of light olefins from syngas over carbon nanotube supported iron catalysts , 2018, Applied Catalysis B: Environmental.

[44]  Seyed Mehdi Kamali Shahri,et al.  Fischer–Tropsch Synthesis over Cobalt/CNTs Catalysts: Functionalized Support and Catalyst Preparation Effect on Activity and Kinetic Parameters , 2018, Industrial & Engineering Chemistry Research.

[45]  Jing Xu,et al.  Promotional effects of multiwalled carbon nanotubes on iron catalysts for Fischer-Tropsch to olefins , 2018, Journal of Catalysis.

[46]  W. Yuan,et al.  Tailoring of Fe/MnK-CNTs Composite Catalysts for the Fischer–Tropsch Synthesis of Lower Olefins from Syngas , 2018, Industrial & Engineering Chemistry Research.

[47]  L. S. Cividanes,et al.  Effects of octadecylamine functionalization of carbon nanotubes on dispersion, polarity, and mechanical properties of CNT/HDPE nanocomposites , 2018, Journal of Materials Science.

[48]  Wantai Yang,et al.  High-Performance Biomass-Based Flexible Solid-State Supercapacitor Constructed of Pressure-Sensitive Lignin-Based and Cellulose Hydrogels. , 2018, ACS applied materials & interfaces.

[49]  O. K. Abubakre,et al.  Optimization of supported bimetallic (Fe-Co/CaCO3) catalyst synthesis parameters for carbon nanotubes growth using factorial experimental design , 2018, Journal of Alloys and Compounds.

[50]  S. M. Ghoreishi,et al.  Optimization of Synthesis Conditions of Carbon Nanotubes via Ultrasonic-Assisted Floating Catalyst Deposition Using Response Surface Methodology , 2018, Nanomaterials.

[51]  Guanghui Wang,et al.  Comparison of preparation methods of iron-based catalysts for enhancing Fischer-Tropsch synthesis performance , 2018 .

[52]  M. Sillanpää,et al.  Uranium removal from Pyhäsalmi/Finland mine water by batch electrocoagulation and optimization with the response surface methodology , 2018 .

[53]  Qian Yang,et al.  The effects of modified carbon nanotubes on the thermal properties of erythritol as phase change materials , 2018 .

[54]  K. P. Möller,et al.  Comparing a cobalt-based catalyst with iron-based catalysts for the Fischer-Tropsch XTL-process operating at high conversion , 2018 .

[55]  O. K. Abubakre,et al.  Full factorial design approach to carbon nanotubes synthesis by CVD method in argon environment , 2017 .

[56]  A. Aliyu,et al.  Effects of aspect ratio of multi-walled carbon nanotubes on coal washery waste water treatment. , 2017, Journal of environmental management.

[57]  F. Zhong,et al.  Surface properties and reactivity of Fe/Al2O3/cordierite catalysts for NO reduction by C2H6: Effects of calcination temperature , 2017 .

[58]  T. Sornchamni,et al.  Catalytic performance of Iron-based catalyst in Fischer–Tropsch synthesis using CO2 containing syngas , 2017 .

[59]  Jin-Xun Liu,et al.  Particle Size and Crystal Phase Effects in Fischer-Tropsch Catalysts , 2017 .

[60]  A. Dalai,et al.  Modification of mesoporous alumina as a support for cobalt-based catalyst in Fischer-Tropsch synthesis , 2017 .

[61]  A. Farghali,et al.  Functionalization of acidified multi-walled carbon nanotubes for removal of heavy metals in aqueous solutions , 2017, Journal of Nanostructure in Chemistry.

[62]  Shirun Yan,et al.  Mg and K dual-decorated Fe-on-reduced graphene oxide for selective catalyzing CO hydrogenation to light olefins with mitigated CO2 emission and enhanced activity , 2017 .

[63]  Wenhui Li,et al.  CO2 hydrogenation to hydrocarbons over alumina-supported iron catalyst: Effect of support pore size , 2017 .

[64]  K. Maslakov,et al.  Oxidation, defunctionalization and catalyst life cycle of carbon nanotubes: a Raman spectroscopy view. , 2017, Physical chemistry chemical physics : PCCP.

[65]  Wei Xia,et al.  On the role of the stability of functional groups in multi-walled carbon nanotubes applied as support in iron-based high-temperature Fischer–Tropsch synthesis , 2016 .

[66]  M. A. Moghaddam,et al.  Enhancing the adsorption performance of carbon nanotubes with a multistep functionalization method: Optimization of Reactive Blue 19 removal through response surface methodology , 2016 .

[67]  Xinbin Ma,et al.  Factors influencing the Fischer–Tropsch synthesis performance of iron-based catalyst: Iron oxide dispersion, distribution and reducibility , 2015 .

[68]  B. T. Chew,et al.  Cadmium ion sorption from aqueous solutions by high surface area ethylenediaminetetraacetic acid- and diethylene triamine pentaacetic acid-treated carbon nanotubes , 2015 .

[69]  N. Coville,et al.  Effect of Group i alkali metal promoters on Fe/CNT catalysts in Fischer-Tropsch synthesis , 2015 .

[70]  Jianfeng Chen,et al.  The effect of pore size or iron particle size on the formation of light olefins in Fischer–Tropsch synthesis , 2015 .

[71]  M. Virginie,et al.  Support effects in high temperature Fischer-Tropsch synthesis on iron catalysts , 2014 .

[72]  D. Mattia,et al.  Fe@CNT-monoliths for the conversion of carbon dioxide to hydrocarbons: structural characterisation and Fischer–Tropsch reactivity investigations , 2014 .

[73]  N. Coville,et al.  Fischer–Tropsch synthesis: Iron-based catalysts supported on nitrogen-doped carbon nanotubes synthesized by post-doping , 2014 .

[74]  D. Koziej,et al.  Impact of sonication pretreatment on carbon nanotubes: A transmission electron microscopy study , 2013 .

[75]  De Chen,et al.  Carbon Nanomaterials in Catalysis: Proton Affinity, Chemical and Electronic Properties, and their Catalytic Consequences , 2013 .

[76]  Wei-Wen Liu,et al.  Synthesis of single-walled carbon nanotubes: effects of active metals, catalyst supports, and metal loading percentage , 2013 .

[77]  A. Mohamed,et al.  Synthesis of carbon nanotubes by methane decomposition over Co–Mo/Al2O3: Process study and optimization using response surface methodology , 2011 .

[78]  Qinghong Zhang,et al.  Development of Novel Catalysts for Fischer–Tropsch Synthesis: Tuning the Product Selectivity , 2010 .

[79]  Young Ho Kim,et al.  Alumina-supported iron oxide nanoparticles as Fischer–Tropsch catalysts: Effect of particle size of iron oxide , 2010 .

[80]  A. Dalai,et al.  Fischer–Tropsch synthesis on mono- and bimetallic Co and Fe catalysts supported on carbon nanotubes , 2009 .

[81]  A. Dalai,et al.  Effect of pre-treatment on physico-chemical properties and stability of carbon nanotubes supported iron Fischer-Tropsch catalysts , 2009 .