Microstructure and wear resistance of oxide coatings on Ti–6Al–4V produced by plasma electrolytic oxidation in an inexpensive electrolyte

[1]  L. Ceschini,et al.  A comparative study of the tribological behaviour of PVD coatings on the Ti-6Al-4V alloy , 2011 .

[2]  Slobodan Mitrovic,et al.  Wear and corrosion behaviour of Ti–13Nb–13Zr and Ti–6Al–4V alloys in simulated physiological solution , 2011 .

[3]  Lijie Wang,et al.  Effect of nitriding-sulfurizing composite treatment on the tribological behavior of titanium alloys , 2010 .

[4]  L. Ceschini,et al.  PEO layers obtained from mixed aluminate–phosphate baths on Ti–6Al–4V: Dry sliding behaviour and influence of a PTFE topcoat , 2010 .

[5]  J. A. Curran,et al.  Evaluation of micromechanical behaviour of plasma electrolytic oxidation (PEO) coatings on Ti–6Al–4V , 2010 .

[6]  Zhongping Yao,et al.  Preparation of PEO ceramic coating on Ti alloy and its high temperature oxidation resistance , 2010 .

[7]  Chen Fei,et al.  Study on the tribological performance of ceramic coatings on titanium alloy surfaces obtained through microarc oxidation , 2009 .

[8]  Yong Han,et al.  Mechanical properties of Ti(C0.7N0.3) film produced by plasma electrolytic carbonitriding of Ti6Al4V alloy , 2008 .

[9]  Fu-ping Wang,et al.  Growth characteristics of plasma electrolytic oxidation ceramic coatings on Ti–6Al–4V alloy , 2008 .

[10]  L. Ceschini,et al.  Comparison of dry sliding friction and wear of Ti6Al4V alloy treated by plasma electrolytic oxidation and PVD coating , 2008 .

[11]  G. E. Thompson,et al.  Real-time imaging of coating growth during plasma electrolytic oxidation of titanium , 2007 .

[12]  H. Habazaki,et al.  Spark anodizing of β-Ti alloy for wear-resistant coating , 2007 .

[13]  P. Gupta,et al.  Electrolytic plasma technology: Science and engineering—An overview , 2007 .

[14]  Fu-ping Wang,et al.  Oxidation behavior of ceramic coatings on Ti–6Al–4V by micro-plasma oxidation , 2007 .

[15]  Yong Han,et al.  Mechanical properties of titania prepared by plasma electrolytic oxidation at different voltages , 2007 .

[16]  P. Chu,et al.  Anode current effects in plasma electrolytic oxidation , 2007 .

[17]  R. Anantheswaran,et al.  Dielectric properties of starch slurries as influenced by starch concentration and gelatinization , 2007 .

[18]  A. A. Youssef,et al.  Surface modification of Ti–6Al–4V alloy by nitrogen ion implantation , 2006 .

[19]  G. Tang,et al.  Structure and tribological performance of modified layer on Ti6Al4V alloy by plasma-based ion implantation with oxygen , 2006 .

[20]  T. Clyne,et al.  Porosity in plasma electrolytic oxide coatings , 2006 .

[21]  Wei-min Liu,et al.  Characterization and tribological investigation of sol–gel ceramic films on Ti–6Al–4V , 2006 .

[22]  Y. Tian,et al.  Wear and oxidation resistance of composite coatings fabricated on Ti-6Al-4V by laser alloying with nitrogen and silicon , 2005 .

[23]  D. Jia,et al.  Effect of discharge pulsating on microarc oxidation coatings formed on Ti6Al4V alloy , 2005 .

[24]  C. Leyens,et al.  Titanium and titanium alloys : fundamentals and applications , 2005 .

[25]  W. Jie,et al.  Wear behavior of the surface of Ti-6Al-4V alloy modified by treating with a pulsed d.c. plasma-duplex process , 2004 .

[26]  Yaming Wang,et al.  Growth, microstructure and mechanical properties of microarc oxidation coatings on titanium alloy in phosphate-containing solution , 2004 .

[27]  Hiroki Habazaki,et al.  Initial stages of plasma electrolytic oxidation of titanium , 2003 .

[28]  A. Matthews,et al.  Kinetic aspects of aluminium titanate layer formation on titanium alloys by plasma electrolytic oxidation , 2002 .

[29]  Ruth E. Cameron,et al.  The effects of concentration and sodium hydroxide on the rheological properties of potato starch gelatinisation , 2002 .

[30]  Yong Han,et al.  Porous nanocrystalline titania films by plasma electrolytic oxidation , 2002 .

[31]  W. Xue,et al.  Structure and properties characterization of ceramic coatings produced on Ti–6Al–4V alloy by microarc oxidation in aluminate solution , 2002 .

[32]  Yue Sun,et al.  Tribological performance of Ti-6Al-4V plasma-based ion implanted with nitrogen , 2000 .

[33]  A. Matthews,et al.  Plasma electrolysis for surface engineering , 1999 .

[34]  Giovanni Straffelini,et al.  Dry sliding wear of Ti–6Al–4V alloy as influenced by the counterface and sliding conditions , 1999 .

[35]  Wei-min Liu,et al.  Tribological behaviors of Ti–6Al–4V modified by chemical methods , 2010 .

[36]  J. Bemiller,et al.  Starch : chemistry and technology , 2009 .

[37]  Guo He,et al.  Ti alloy design strategy for biomedical applications , 2006 .

[38]  G. Stachowiak.  Wear - Materials, Mechanisms and Practice , 2005 .

[39]  Y. Fu,et al.  Friction and wear behaviour of carbon nitride films deposited on plasma nitrided Ti–6Al–4V , 2000 .

[40]  Joseph R. Davis.  Properties and selection : nonferrous alloys and special-purpose materials , 1990 .