Study of ADRC on fluid power transmission system control characteristics of 60MN hydraulic press

Heavy forgings quality and production capacity represent an important symbol of the level of the country's industrial development. Large water press is the equipment for heavy forgings forming, and it's essential to improve the control performance of power transmission system. In this paper, the mathematical models of the key elements for fluid power transmission system, including water pump, accumulator, inlet valve, outlet valve, main distributor, prefill valve, pipeline, actuator, load, working medium, electro-hydraulic servo system, are established, and the complete mathematical model of fluid power transmission system is derived. Based on the mathematical model of electro-hydraulic position servo control system of hydraulic press, the load characteristics of the electro-hydraulic position servo control system are analyzed, the strategy of active disturbance rejection control (ADRC) is derived, the principle of selecting the control parameters is obtained. Furthermore, the effect of ADRC control and PI control of hydraulic press is analyzed under no load, step, sinusoidal and ramp disturbance force respectively. The results show that: compared to the PI control, the ADRC can make distributor more rapid and sensitive, and improve the control performance and anti-disturbance capability of electro-hydraulic servo system of hydraulic press, and improve the overall response speed and compensate the position control accuracy under the low-frequency disturbances. Above research work can provide theoretical and experimental basis for studying on control method of fluid power transmission system of 60MN hydraulic press.

[1]  Chunyan Wang,et al.  Reduced-order observer-based robust control for cold rolling mill HAGC system with measurement delay , 2010, Proceedings of the 29th Chinese Control Conference.

[2]  Wenchao Xue,et al.  On frequency-domain analysis of ADRC for uncertain system , 2013, 2013 American Control Conference.

[3]  Jun Zou.  APPLICATION OF ADAPTIVE INTERACTION PID CONTROLLER IN HYDRAULIC SERVO SYSTEM , 2006 .

[4]  Ali Ghaffari,et al.  Modeling and identification of a solenoid valve for PWM control applications , 2009 .

[5]  Zhu Xue-feng,et al.  On Parameters Tuning and Optimization of Active Disturbance Rejection Controller , 2004 .

[6]  Xuanyin Wang,et al.  Observer-based cascade control of a 6-DOF parallel hydraulic manipulator in joint space coordinate , 2010 .

[7]  Mahdi Tavakoli,et al.  Sliding-mode bilateral teleoperation control design for master–slave pneumatic servo systems , 2012 .

[8]  Chen Hua-yuan.  Auto-disturbances-rejection controller design and its parameter optimization for aircraft longitudinal attitude , 2010 .

[9]  Quan Lingxiao.  Electro-hydraulic Servo Control System Modeling and Simulation of 50MN Water Press for Free Forging , 2007 .

[10]  Zhang Hong.  Discussion on the Development Process of Forging Hydraulic Press and Trends , 2010 .

[11]  Liu Kun.  Design of Robust Control Based on Internal Model Control for Electro-hydraulic Position Servo System , 2007 .

[12]  Yao Baosen.  The Current Status and Development of National Hydraulic Press for Plate Punching , 2007 .

[13]  Wen Tan,et al.  Disturbance rejection in thermal power plants , 2011, Proceedings of the 30th Chinese Control Conference.