Fabrication and investigation of in-plane compliant SU8 structures for MEMS and their application to micro valves and micro grippers

Abstract This paper demonstrates the versatile application potential of SU8 photoepoxy for micromechanical components. Its outstanding aspect ratio and attainable film thicknesses enable the design of structures such as beams and hinges that are compliant in the wafer plane. The applicability of this technology is demonstrated on shape memory alloy and pneumatically actuated micro grippers [1] , [2] as well as a micro fluidic channel with integrated check valve. Besides reporting on the improved technology for 300–400 μm SU8 structures, we will present elastic material properties measured on micro compliant beams and flexural hinges employing a tactile force sensor [3] . The material properties measured on micro specimen are compared to large scale standard tensile test results.

[1]  L.J. Guerin,et al.  Simple and low cost fabrication of embedded micro-channels by using a new thick-film photoplastic , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[2]  P. Vettiger,et al.  Two steps micromoulding and photopolymer high-aspect ratio structuring for applications in piezoelectric motor components , 1998 .

[3]  N. F. de Rooij,et al.  New integrated axle fabrication for piezoelectric motors based on a rotor clip assembling operation , 1999 .

[4]  Stephanus Büttgenbach,et al.  A New Micro Pneumatic Actuator for Micromechanical Systems , 2001 .

[5]  N. D. Rooij,et al.  All-photoplastic, soft cantilever cassette probe for scanning force microscopy , 2000 .

[6]  P. Vettiger,et al.  Fabrication of photoplastic high-aspect ratio microparts and micromolds using SU-8 UV resist , 1998 .

[7]  N. D. Rooij,et al.  Micromachined photoplastic probe for scanning near-field optical microscopy , 2001 .

[8]  Jane M. Shaw,et al.  Micromachining applications of a high resolution ultrathick photoresist , 1995 .

[9]  M. Despont,et al.  SU-8: a low-cost negative resist for MEMS , 1997 .

[10]  N. D. Rooij,et al.  Soft, entirely photoplastic probes for scanning force microscopy , 1999 .

[11]  Peter Vettiger,et al.  High-aspect-ratio, ultrathick, negative-tone near-UV photoresist and its applications for MEMS , 1998 .

[12]  Philippe Renaud,et al.  High aspect ratio planar coils embedded in SU8 photoepoxy for MEMS applications , 1998 .

[13]  M. Laudon,et al.  Mechanical characterization of a new high-aspect-ratio near UV-photoresist , 1998 .

[14]  P. Vettiger,et al.  Fabrication process of high aspect ratio elastic structures for piezoelectric motor applications , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).