A framework for in-situ geometric data acquisition using laser scanning for BIM modelling

Abstract Laser scanning, as a rising topic within the Architecture, Engineering and Construction (AEC) industry, has been increasing both in importance and practice as a means of gathering in-situ geometric data. Several studies have covered possible applications of this technology, from construction monitoring to damage assessment, with Building Information Modelling (BIM) being one of its focus. Despite this, to present, no research was found to fully explore the laser scanning survey process, with most studies either focusing the process after the point cloud acquisition or after its conversion to BIM. To help fill this knowledge gap, the present article introduces a full-fledged laser scanning framework for geometric data acquisition, comprising the entire spectrum from planning, surveying and data analysis. The result is a framework that details the necessary steps to acquire a point cloud that is applicable to BIM modelling. The framework is validated through its application to a recently renewed bus station in Porto, Portugal. Relevant conclusions regarding setting selection, station positioning, optimization, point cloud decimation and treatment, required resolution, along other topics, are drawn through laboratory tests and the previously mentioned case study.

[1]  Martial Hebert,et al.  Fully automatic registration of multiple 3D data sets , 2003, Image Vis. Comput..

[2]  Jean-Laurent Hippolyte,et al.  Review: reconstruction of 3D building information models from 2D scanned plans , 2015 .

[3]  Charles M. Eastman,et al.  BIM Handbook: A Guide to Building Information Modeling for Owners, Managers, Designers, Engineers and Contractors , 2008 .

[4]  Pedro Arias,et al.  Non-destructive approach for the generation and thermal characterization of an as-built BIM , 2014 .

[5]  Xianbo Zhao,et al.  A scientometric review of global BIM research: Analysis and visualization , 2017 .

[6]  Chih-Chen Chang,et al.  Automated dimensional quality assurance of full-scale precast concrete elements using laser scanning and BIM , 2016 .

[7]  Daniel W.M. Chan,et al.  Perceived benefits of and barriers to Building Information Modelling (BIM) implementation in construction: The case of Hong Kong , 2019, Journal of Building Engineering.

[8]  Burcu Akinci,et al.  Automatic Creation of Semantically Rich 3D Building Models from Laser Scanner Data , 2013 .

[9]  Chao Wang,et al.  Automatic BIM component extraction from point clouds of existing buildings for sustainability applications , 2015 .

[10]  Stefano Girardi,et al.  Discrimination between marls and limestones using intensity data from terrestrial laser scanner , 2009 .

[11]  Salam Al-Bizri,et al.  Building information modeling for facilities management: A literature review and future research directions , 2019, Journal of Building Engineering.

[12]  Lucía Díaz-Vilariño,et al.  Automatic thermographic and RGB texture of as-built BIM for energy rehabilitation purposes , 2013 .

[13]  Linda G. Shapiro,et al.  Computer Vision , 2001 .

[14]  Ying Hua,et al.  A BIM-GIS integrated pre-retrofit model for building data mapping , 2016 .

[15]  Dieter Fox,et al.  RGB-D Mapping: Using Depth Cameras for Dense 3D Modeling of Indoor Environments , 2010, ISER.

[16]  Asli Akcamete-Gungor,et al.  Investigation of Terrestrial Laser Scanning Reflectance Intensity and RGB Distributions to Assist Construction Material Identification , 2017 .

[17]  Philippe Veron,et al.  FROM POINT CLOUD TO BIM: A SURVEY OF EXISTING APPROACHES , 2013 .

[18]  A. Choudhury.  Colour-difference assessment , 2015 .

[19]  Geoffrey Qiping Shen,et al.  Mapping the knowledge domains of Building Information Modeling (BIM): A bibliometric approach , 2017 .

[20]  Frédéric Bosché,et al.  Tracking the Built Status of MEP Works: Assessing the Value of a Scan-vs-BIM System , 2014, J. Comput. Civ. Eng..

[21]  Chao Wang,et al.  Performance Evaluation of Automatically Generated BIM from Laser Scanner Data for Sustainability Analyses , 2015 .

[22]  Burcu Akinci,et al.  Automatic Reconstruction of As-Built Building Information Models from Laser-Scanned Point Clouds: A Review of Related Techniques | NIST , 2010 .

[23]  Hyojoo Son,et al.  Scan-to-BIM - An Overview of the Current State of the Art and a Look Ahead , 2015 .

[24]  Frédéric Bosché,et al.  The value of integrating Scan-to-BIM and Scan-vs-BIM techniques for construction monitoring using laser scanning and BIM: The case of cylindrical MEP components , 2015 .

[25]  Marc Jaeger,et al.  Segmentation of architecture shape information from 3D point cloud , 2009, VRCAI '09.

[26]  Burcu Akinci,et al.  Efficient and Effective Quality Assessment of As-Is Building Information Models and 3D Laser-Scanned Data , 2011 .

[27]  Changmin Kim,et al.  Automated construction progress measurement using a 4D building information model and 3D data , 2013 .

[28]  Klaus Schilling,et al.  Evaluation of a Backpack-Mounted 3D Mobile Scanning System , 2015, Remote. Sens..

[29]  Bilal Succar,et al.  Building information modelling framework: A research and delivery foundation for industry stakeholders , 2009 .

[30]  Ahmad Baik,et al.  From point cloud to Jeddah Heritage BIM Nasif Historical House - case study , 2017, Digit. Appl. Archaeol. Cult. Heritage.

[31]  Iva Kovacic,et al.  Building Information Modelling for analysis of energy efficient industrial buildings – A case study , 2017 .

[32]  Jeff Haberl,et al.  Developing a physical BIM library for building thermal energy simulation , 2015 .

[33]  F. H. Abanda,et al.  An investigation of the impact of building orientation on energy consumption in a domestic building using emerging BIM (Building Information Modelling) , 2016 .

[34]  Syahrul Nizam Kamaruzzaman,et al.  Sustainability-led design: Feasibility of incorporating whole-life cycle energy assessment into BIM for refurbishment projects , 2019, Journal of Building Engineering.

[35]  Eddy Krygiel,et al.  Green BIM: Successful Sustainable Design with Building Information Modeling , 2008 .

[36]  Mani Golparvar-Fard,et al.  Mapping actual thermal properties to building elements in gbXML-based BIM for reliable building energy performance modeling , 2015 .

[37]  S. Soudarissanane,et al.  Influence of atmospheric conditions on the range distance and number of returned points in Leica Scanstation 2 point clouds , 2010 .

[38]  Ralf Klein,et al.  A combined scientometric and conventional literature review to grasp the entire BIM knowledge and its integration with energy simulation , 2019, Journal of Building Engineering.

[39]  Craig L. Glennie,et al.  Synthesis of Transportation Applications of Mobile LIDAR , 2013, Remote. Sens..

[40]  Stephen Emmitt,et al.  Beyond the third dimension of BIM: A systematic review of literature and assessment of professional views , 2018, Journal of Building Engineering.

[41]  Sarah Smith-Voysey,et al.  Geometric validation of a ground-based mobile laser scanning system , 2008 .

[42]  B. Giel,et al.  Using Laser Scanning to Access the Accuracy of As-Built BIM , 2011 .

[43]  M. Bassier,et al.  Classification of sensor independent point cloud data of building objects using random forests , 2019, Journal of Building Engineering.

[44]  Nuno M.M. Ramos,et al.  Building information modeling for energy retrofitting – A review , 2018, Renewable and Sustainable Energy Reviews.

[45]  Chih-Chen Chang,et al.  A framework for dimensional and surface quality assessment of precast concrete elements using BIM and 3D laser scanning , 2015 .

[46]  Chih-Chen Chang,et al.  Automated dimensional quality assessment of precast concrete panels using terrestrial laser scanning , 2014 .

[47]  Antonio Grilo,et al.  Bibliometric analysis and review of Building Information Modelling literature published between 2005 and 2015 , 2017 .

[48]  Qingwu Hu,et al.  Shield subway tunnel deformation detection based on mobile laser scanning , 2019, Automation in Construction.

[49]  Henrique Lorenzo,et al.  Methods for documenting historical agro-industrial buildings: a comparative study and a simple photogrammetric method , 2006 .

[50]  Jun Cao,et al.  LiDAR point-cloud mapping of building façades for building energy performance simulation , 2019, Automation in Construction.

[51]  Danijel Rebolj,et al.  Point cloud quality requirements for Scan-vs-BIM based automated construction progress monitoring , 2017 .

[52]  Xiangyu Wang,et al.  A mixed review of the adoption of Building Information Modelling (BIM) for sustainability , 2017 .

[53]  Fernanda Leite,et al.  Evaluation of accuracy of as-built 3D modeling from photos taken by handheld digital cameras , 2012 .

[54]  Brian Okorn,et al.  Methods for Automatically Modeling and Representing As-built Building Information Models , 2011 .

[55]  Burcu Akinci,et al.  Constructing as-is BIMs from progressive scan data , 2012 .

[56]  Thomas A. Funkhouser,et al.  Min-cut based segmentation of point clouds , 2009, 2009 IEEE 12th International Conference on Computer Vision Workshops, ICCV Workshops.

[57]  M. Bassier,et al.  Standalone Terrestrial Laser Scanning for Efficiently Capturing Aec Buildings for As-Built Bim , 2016 .

[58]  H. Alaka,et al.  Building Information Modelling adoption in the European Union: An overview , 2019, Journal of Building Engineering.

[59]  Ioannis Brilakis,et al.  Comparison of Optical Sensor-Based Spatial Data Collection Techniques for Civil Infrastructure Modeling , 2009 .

[60]  Mehmet Yalcinkaya,et al.  Patterns and trends in Building Information Modeling (BIM) research: A Latent Semantic Analysis , 2015 .