Increased sustainable electricity generation in up-flow air-cathode microbial fuel cells.

Sustainable electricity was generated from glucose in up-flow air-cathode microbial fuel cells (MFCs) with carbon cloth cathode and carbon granular anode. Plastic sieves rather than membrane were used to separate the anode and cathode. Based on 1g/l glucose as substrate, a maximum volumetric power density of 25+/-4 W/m(3) (89 A/m(3)) was obtained for the MFC with a sieve area of 30 cm(2) and 49+/-3 W/m(3) (215 A/m(3)) for the MFC with a sieve area of 60 cm(2). The increased power density with larger sieve area was mainly due to the decrease of internal resistance according to the electrochemistry impedance spectroscopy analysis. Increasing the sieve area from 30 cm(2) to 60 cm(2) resulted in a decrease of overall internal resistance from 41 ohm to 27.5 ohm and a decrease of ohmic resistance from 24.3 ohm to 14 ohm. While increasing operational recirculation ratio (RR) decreased internal resistance and increased power output at low substrate concentration, the effect of RR on cell performance was negligible at higher substrate concentration.

[1]  K. R. Cooper,et al.  Electrical test methods for on-line fuel cell ohmic resistance measurement , 2006 .

[2]  Bruce E Logan,et al.  Cathode performance as a factor in electricity generation in microbial fuel cells. , 2004, Environmental science & technology.

[3]  Stefano Freguia,et al.  Microbial fuel cells: methodology and technology. , 2006, Environmental science & technology.

[4]  Hong Liu,et al.  Increased power generation in a continuous flow MFC with advective flow through the porous anode and reduced electrode spacing. , 2006, Environmental science & technology.

[5]  Hong Liu,et al.  Electricity generation using an air-cathode single chamber microbial fuel cell in the presence and absence of a proton exchange membrane. , 2004, Environmental science & technology.

[6]  Sangeun Oh,et al.  Proton exchange membrane and electrode surface areas as factors that affect power generation in microbial fuel cells , 2006, Applied microbiology and biotechnology.

[7]  Hong Liu,et al.  Power generation in fed-batch microbial fuel cells as a function of ionic strength, temperature, and reactor configuration. , 2005, Environmental science & technology.

[8]  D. Lovley,et al.  Novel Mode of Microbial Energy Metabolism: Organic Carbon Oxidation Coupled to Dissimilatory Reduction of Iron or Manganese , 1988, Applied and environmental microbiology.

[9]  Hong Liu,et al.  Production of electricity during wastewater treatment using a single chamber microbial fuel cell. , 2004, Environmental science & technology.

[10]  Frano Barbir,et al.  PEM Fuel Cells: Theory and Practice , 2012 .

[11]  Qingliang Zhao,et al.  A microbial fuel cell using permanganate as the cathodic electron acceptor , 2006 .

[12]  Willy Verstraete,et al.  Tubular microbial fuel cells for efficient electricity generation. , 2005, Environmental science & technology.

[13]  Zhen He,et al.  An upflow microbial fuel cell with an interior cathode: assessment of the internal resistance by impedance spectroscopy. , 2006, Environmental science & technology.

[14]  Bruce E. Logan,et al.  Increased performance of single-chamber microbial fuel cells using an improved cathode structure , 2006 .

[15]  B. Min,et al.  Electricity generation using membrane and salt bridge microbial fuel cells. , 2005, Water research.

[16]  B. Logan,et al.  Electricity-producing bacterial communities in microbial fuel cells. , 2006, Trends in microbiology.