Dynamic performances of solar heat storage system with packed bed using myristic acid as phase change material

Abstract This paper is aimed at analyzing the thermal characteristics of packed bed containing spherical capsules, used in a latent heat thermal storage system with a solar heating collector. Myristic acid is selected as phase change material (PCM), and water is used as heat transfer fluid (HTF). The mathematical model based on the energy balance of HTF and PCM is developed to calculate the temperatures of PCM and HTF, solid fraction and heat release rate during the solidifying process. The latent efficiency, which is defined as the ratio between the instantaneous released latent heat and the maximum released heat, is introduced to indicate the thermal performances of the system. The inlet temperature of HTF (50 °C), flow rate of HTF (10 kg/min) and initial temperature of HTF (66 °C) were chosen for studying thermal performances in solar heat storage system. The influences of inlet temperature of HTF, flow rate of HTF and initial temperatures of HTF and PCM on the latent efficiency and heat release rate are also analyzed and discussed.

[1]  Khamid Mahkamov,et al.  Solar energy storage using phase change materials , 2007 .

[2]  John Beek,et al.  Design of Packed Catalytic Reactors , 1962 .

[3]  R. Velraj,et al.  Experimental investigation on a combined sensible and latent heat storage system integrated with constant/varying (solar) heat sources , 2007 .

[4]  Amar M. Khudhair,et al.  A review on phase change energy storage: materials and applications , 2004 .

[5]  Marcel Lacroix,et al.  A new PCM storage system for managing simultaneously solar and electric energy , 2006 .

[6]  S. C. Solanki,et al.  Heat transfer characteristics of thermal energy storage system using PCM capsules: A review , 2008 .

[7]  S. Iniyan,et al.  Phase change characteristic study of spherical PCMs in solar energy storage , 2009 .

[8]  A. Sari,et al.  Thermal energy storage system using stearic acid as a phase change material , 2001 .

[9]  A. Sari,et al.  Thermal performance of palmitic acid as a phase change energy storage material , 2002 .

[10]  S. C. Solanki,et al.  Latent heat thermal energy storage using cylindrical capsule: Numerical and experimental investigations , 2006 .

[11]  A. Sari,et al.  Phase change and heat transfer characteristics of a eutectic mixture of palmitic and stearic acids as PCM in a latent heat storage system , 2003 .

[12]  D. Buddhi,et al.  Numerical heat transfer studies of the fatty acids for different heat exchanger materials on the performance of a latent heat storage system , 2005 .

[13]  Hamid El Qarnia,et al.  Numerical analysis of a coupled solar collector latent heat storage unit using various phase change materials for heating the water , 2009 .

[14]  Y. Varol,et al.  Energy and exergy analysis of a latent heat storage system with phase change material for a solar collector , 2008 .

[15]  S. C. Solanki,et al.  An analysis of a packed bed latent heat thermal energy storage system using PCM capsules: Numerical investigation , 2009 .

[16]  B. Zivkovic,et al.  An analysis of isothermal phase change of phase change material within rectangular and cylindrical containers , 2001 .

[17]  A. Sharma,et al.  Review on thermal energy storage with phase change materials and applications , 2009 .

[18]  A. Sari,et al.  Preparation and thermal properties of capric acid/palmitic acid eutectic mixture as a phase change energy storage material , 2008 .

[19]  Tarik Kousksou,et al.  Second law analysis of latent thermal storage for solar system , 2007 .

[20]  Mohammed A. Hamdan,et al.  Experimental and numerical investigation of solid particles thermal energy storage unit , 2006 .