Deformation mechanism of polypropylene composites filled with magnesium hydroxide

The fracture behavior and deformation mechanism of polypropylene (PP) composites filled with magnesium hydroxide [Mg(OH)2] were investigated. The incorporation of Mg(OH)2 particles into the PP matrix led to an increase in Young's modulus and a significant reduction in the tensile yield strength and elongation at break. Surface modification on filler particles with stearic acid could reduce the interfacial adhesion between the filler and PP matrix and improve the stress transferability. The deformation mechanism of the Mg(OH)2/PP composites depended on the interfacial adhesion and the deformability of ligaments between microvoids caused by debonding. The deformability of the ligaments could be significantly improved by surface modification on the particle surface. The dependence of the deformation behavior of the Mg(OH)2/PP composites on the filler content was in accordance with percolation theory. The agglomeration of microvoids and fibrillation of ligaments in the PP composites with excessive filler content indicated the weak resistance of the polymer matrix to crack propagation and premature fracture in a brittle manner. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1922–1930, 2005

[1]  P. P. Kundu,et al.  Tensile property and interfacial dewetting in the calcite filled HDPE, LDPE, and LLDPE composites , 2002 .

[2]  A. Argon,et al.  Toughenability of Nylon-6 with CaCO3 filler particles: new findings and general principles , 2001 .

[3]  R. J. Gaymans,et al.  Polypropylene–rubber blends: 3. The effect of the test speed on the fracture behaviour , 1999 .

[4]  Robert E. Cohen,et al.  Toughness mechanism in semi-crystalline polymer blends: II. High-density polyethylene toughened with calcium carbonate filler particles , 1999 .

[5]  E. Fekete,et al.  Adhesion and Surface Modification , 1999 .

[6]  J. Velasco,et al.  Low-rate fracture behaviour of magnesium hydroxide filled polypropylene block copolymer , 1998 .

[7]  G. Michler,et al.  Micromechanical deformation processes in toughened and particle filled semicrystalline polymers: Part 2. model representation for micromechanical deformation processes , 1998 .

[8]  G. Michler,et al.  Relationship between morphology and micromechanical toughening mechanisms in modified polypropylenes , 1996 .

[9]  A. Argon,et al.  Toughening mechanism of rubber-modified polyamides , 1995 .

[10]  A. Argon,et al.  Crystalline morphology of polyamide-6 near planar surfaces , 1995 .

[11]  P. Hornsby,et al.  Interfacial modification of polypropylene composites filled with magnesium hydroxide , 1995, Journal of Materials Science.

[12]  Andrea Lazzeri,et al.  Dilatational bands in rubber-toughened polymers , 1993, Journal of Materials Science.

[13]  Q. Fu,et al.  Effect of morphology on brittle-ductile transition of HPDE/CaCO3 blends† , 1993 .

[14]  Q. Fu,et al.  Polyethylene toughened by CaCO3 particle: Brittle‐ductile transition of CaCO3‐toughened HDPE , 1993 .

[15]  Q. Fu,et al.  Polyethylene toughened by CaCO3 particles-percolation model of Brittle-Ductile transition in HDPE/CaCO3 blends , 1993 .

[16]  Q. Fu,et al.  Polyethylene toughened by rigid inorganic particles , 1992 .

[17]  F. Maurer,et al.  Effect of nucleation, filler anisotropy and orientation on the properties of PP composites , 1994 .

[18]  D. Theodorou,et al.  ATOMISTIC SIMULATION OF A GLASSY POLYMER/GRAPHITE INTERFACE , 1991 .

[19]  S. N. Maiti,et al.  Mechanical properties of i-PP/CaCO3 composites , 1991 .

[20]  G. Akay.  Flow induced polymer-filler interactions: Bound polymer properties and bound polymer-free polymer phase separation and subsequent phase inversion during mixing† , 1990 .

[21]  J. Kučera,et al.  Yield behavior of polypropylene filled with CaC03 and Mg(OH)2. I: “Zero” interfacial adhesion , 1990 .

[22]  J. Kučera,et al.  Yield behavior of PP/CaC03 and PP/Mg(OH)2 composites. II: Enhanced interfacial adhesion , 1990 .

[23]  B. Pukánszky.  Influence of interface interaction on the ultimate tensile properties of polymer composites , 1990 .

[24]  E. Nauman,et al.  On the micromechanics of composites containing spherical inclusions , 1990 .

[25]  Pht Peter Vollenberg,et al.  Particle size dependence of the Young's modulus of filled polymers: 1. Preliminary experiments , 1989 .

[26]  E. Fekete,et al.  Surface tension and mechanical properties in polyolefin composites , 1989 .

[27]  Souheng Wu.  A generalized criterion for rubber toughening: The critical matrix ligament thickness , 1988 .

[28]  M. Folkes,et al.  Direct study of the structure and properties of transcrystalline layers , 1987 .

[29]  Souheng Wu.  Phase structure and adhesion in polymer blends: a criterion for rubber toughening , 1985 .

[30]  F. Maurer,et al.  Interfacial interaction in kaolin-filled polyethylene composites , 1985 .

[31]  M. Narkis,et al.  Stress-strain behavior of styrene-acrylonitrile/glass bead composites in the glassy region , 1971 .