Economical treatment of reverse osmosis reject of textile industry effluent by electrodialysis–evaporation integrated process

Abstract Membrane separation methods such as electrodialysis (ED) can reduce the volume load on evaporators by facilitating further concentration of rejects from reverse osmosis (RO) plants. ED studies were carried out on a bench-scale system using five membrane cell pairs to obtain a textile effluent concentrate containing approximately 6 times the quantity of salts present in the RO reject. The limiting current densities were determined to be in the range 2.15–3.35 amp/m 2 for feed flow rates varying from 18 to 108 L/h. Apart from feed rate, the influence of volume of concentrate and current on membrane performance was evaluated to optimize current utilization. An estimation of energy requirement of an integrated process constituting ED and evaporation for concentration of inorganics present in textile effluent from 4.35% to 24% was made and found to be approximately one eighth of the operating cost incurred by evaporation alone. Detailed design of a commercial ED system revealed that a membrane area of 13.1 m 2 was required to treat a feed rate of 1500 L/h. The payback period to recover capital investment was found to be 110 days.

[1]  Liang Teh-Ming,et al.  A feasibility study of industrial wastewater recovery using electrodialysis reversal , 2008 .

[2]  Thirumalachari Ramasami,et al.  Sustaining tanning process through conservation, recovery and better utilization of chromium , 2003 .

[3]  Matthias Wessling,et al.  Towards spacer free electrodialysis , 2009 .

[4]  D. Akretche,et al.  Water reuse of an industrial effluent by means of electrodeionisation , 2004 .

[5]  Matthias Wessling,et al.  Multi-layer spacer geometries with improved mass transport , 2006 .

[6]  M. Turek,et al.  Brackish water desalination in RO–single pass EDR system , 2009 .

[7]  R. Guardani,et al.  Modeling and Optimization of Multistage Electrodialysis Systems for Water Desalination , 2011 .

[8]  Hong-Joo Lee,et al.  Designing of an electrodialysis desalination plant , 2002 .

[9]  Soteris A. Kalogirou,et al.  Seawater desalination using renewable energy sources , 2005 .

[10]  B. Bruggen,et al.  Electrodialysis on RO concentrate to improve water recovery in wastewater reclamation , 2011 .

[11]  Yoshinobu Tanaka.  Simulation of an ion exchange membrane electrodialysis process for continuous saline water desalination , 2010 .

[12]  Enrico Drioli,et al.  4.09 – Membrane Systems for Seawater and Brackish Water Desalination , 2010 .

[13]  Catherine Charcosset,et al.  A review of membrane processes and renewable energies for desalination , 2009 .

[14]  A. B. de Haan,et al.  Novel spacers for mass transfer enhancement in membrane separations , 2005 .

[15]  Jack Gilron,et al.  Pilot studies on high recovery BWRO-EDR for near zero liquid discharge approach , 2010 .

[16]  S. Satyanarayana,et al.  Development of an electrodialysis–distillation integrated process for separation of hazardous sodium azide to recover valuable DMSO solvent from pharmaceutical effluent , 2013 .

[17]  Xianhao Cheng,et al.  Control of DMSO in wastewater to prevent DMS nuisance odors. , 2009, Water research.

[18]  Yoshinobu Tanaka,et al.  Ion-exchange membrane electrodialytic salt production using brine discharged from a reverse osmosis seawater desalination plant , 2003 .

[19]  Johann Fischer,et al.  Desalination of whey by electrodialysis and ion exchange resins: analysis of both processes with regard to sustainability by calculating their cumulative energy demand , 2002 .

[20]  Lazaros G. Papageorgiou,et al.  Optimal design of an electrodialysis brackish water desalination plant , 2005 .

[21]  S. Sridhar,et al.  Processing of composite industrial effluent by reverse osmosis , 2003 .

[22]  E. Korngold,et al.  Electrodialysis of brine solutions discharged from an RO plant , 2009 .

[23]  M. Rodrigues,et al.  Synthesis and characterisation of high impact polystyrene/polyaniline composite membranes for electrodialysis , 2004 .