Strength and microscopic characteristics of alkali-activated fly ash-cement

The effects of different activator concentration, liquid/fly ash ratio, and curing temperature and time on the compressive strength of specimens prepared from low-calcium fly ash activated with sodium hydroxide without the use of Portland cement were investigated. SEM, XRD and mercury intrusion porosimetry (MIP) were used to observed the structural feature, reaction products, and porosity and pore-size distribution of the specimens from alkaliactivated fly ash, respectively. It was found that the degree of reactivity, as shown by the compressive strength, the activator concentration and the ratio of liquid/fly ash, and the curing temperature always result to be significative factors. The 7, 14, and 28-day compressive strengths of specimens prepared from alkali-activated fly ash by 5M NaOH solution at 50 °C are 152, 219, and 263 kgf/cm2, while those from 6M solution are 184, 225, and 267 kgf/cm2, respectively. In SEM observation, the fly ash activated by the 5M NaOH solution shows a more continuous matrix with solid and non porous due to subsequent gel restructuring by amorphous alkaline aluminosilicate produced from alkali-activated fly ash.

[1]  Francisca Puertas,et al.  Alkali-activated slag mortars: Mechanical strength behaviour , 1999 .

[2]  Hossein Rostami,et al.  Alkali ash material: a novel fly ash-based cement. , 2003, Environmental science & technology.

[3]  C. Shi,et al.  Pozzolanic reaction in the presence of chemical activators. Part I. Reaction kinetics , 2000 .

[4]  A. Katz.  Microscopic study of alkali-activated fly ash , 1998 .

[5]  S. Komarneni,et al.  Pore structures of fly ashes activated by Ca(OH)2 and CaSO4 · 2H2O , 1995 .

[6]  F. Puertas,et al.  Mineralogical and microstructural characterisation of alkali-activated fly ash/slag pastes , 2003 .

[7]  J. Davidovits.  Geopolymers : inorganic polymeric new materials , 1991 .

[8]  J.S.J. van Deventer,et al.  The potential use of geopolymeric materials to immobilise toxic metals: Part I. Theory and applications☆ , 1997 .

[9]  S. Martínez-Ramírez,et al.  Alkali-activated fly ash/slag cements: Strength behaviour and hydration products , 2000 .

[10]  J. Sanjayan,et al.  Effect of elevated temperature curing on properties of alkali-activated slag concrete , 1999 .

[11]  S. Goñi,et al.  Hydraulic activity and microstructural characterization of new fly ash–belite cements synthesized at different temperatures , 1999 .

[12]  Caijun Shi,et al.  Pozzolanic reaction in the presence of chemical activators: Part II — Reaction products and mechanism , 2000 .

[13]  J.M.J.M. Bijen,et al.  Reactivity of Fly Ash At High pH , 1989 .

[14]  D. Roy,et al.  Chemical Activation of Low Calcium Fly Ash Part 1: Identification of Suitable Activators and their Dosage , 2001 .

[15]  S. Goñi,et al.  Activation of pozzolanic reaction of hydrated portland cement fly ash pastes in sulfate solution , 2004 .

[16]  Ángel Palomo,et al.  Alkali-activated fly ashes: A cement for the future , 1999 .

[17]  J. Biernacki,et al.  Microanalysis of alkali-activated fly ash–CH pastes , 2002 .

[18]  M. Frías,et al.  Investigations on the flyash-calcium hydroxide reactions , 1989 .