Enhancement of Mechanical Properties of FDM-PLA Parts via Thermal Annealing

[1]  E. García-Plaza,et al.  Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection , 2017 .

[2]  Robert Langer,et al.  Physical and mechanical properties of PLA, and their functions in widespread applications - A comprehensive review. , 2016, Advanced drug delivery reviews.

[3]  Darren J. Martin,et al.  Enhanced thermal stability of biomedical thermoplastic polyurethane with the addition of cellulose nanocrystals , 2015 .

[4]  T. B. Green,et al.  The thermal effects on electrospinning of polylactic acid melts , 2006 .

[5]  S. Nobukawa,et al.  Chain Packing and Its Anomalous Effect on Mechanical Toughness for Poly(lactic acid). , 2015, Biomacromolecules.

[6]  M. Martorelli,et al.  The impact of process parameters on mechanical properties of parts fabricated in PLA with an open-source 3-D printer , 2015 .

[7]  M. Yasuniwa,et al.  Thermal analysis of the double-melting behavior of poly(L-lactic acid) , 2004 .

[8]  Kai Cheng,et al.  Development and use of augmented reality and 3D printing in consulting patient with complex skull base cholesteatoma , 2017 .

[9]  A. Pennings,et al.  Crystal structure, conformation and morphology of solution-spun poly(L-lactide) fibers , 1990 .

[10]  D. Gardner,et al.  Improving the impact strength of Poly(lactic acid) (PLA) in fused layer modeling (FLM) , 2017 .

[11]  Yoshito Ikada,et al.  Crystallization from the melt of poly(lactide)s with different optical purities and their blends , 1996 .

[12]  S. Andjelić,et al.  Polymer crystallization rate challenges: The art of chemistry and processing , 2015 .

[13]  Paulo Jorge Da Silva bartolo,et al.  Characterisation of PCL and PCL/PLA Scaffolds for Tissue Engineering☆ , 2013 .

[14]  J. Harings,et al.  Correlating molecular and crystallization dynamics to macroscopic fusion and thermodynamic stability in fused deposition modeling; a model study on polylactides , 2018 .

[15]  R. Mülhaupt,et al.  Polymers for 3D Printing and Customized Additive Manufacturing , 2017, Chemical reviews.

[16]  D Stamatialis,et al.  Fabrication of three-dimensional bioplotted hydrogel scaffolds for islets of Langerhans transplantation , 2015, Biofabrication.

[17]  Kevin L. Ong,et al.  New biomaterials for orthopedic implants , 2015 .

[18]  Chul B. Park,et al.  Poly(lactic acid) crystallization , 2012 .

[19]  L. Lim,et al.  Processing technologies for poly(lactic acid) , 2008 .

[20]  Ali P. Gordon,et al.  Mechanical Property Optimization of FDM PLA in Shear with Multiple Objectives , 2015, JOM.

[21]  A. Subramanian,et al.  Injectable and 3D Bioprinted Polysaccharide Hydrogels: From Cartilage to Osteochondral Tissue Engineering. , 2017, Biomacromolecules.

[22]  Julian Vincent,et al.  Structural Biomaterials: Third Edition , 2012 .

[23]  G. Wegner,et al.  Investigation of the structure of solution grown crystals of lactide copolymers by means of chemical reactions , 1973 .

[24]  Paulo Jorge Da Silva bartolo,et al.  3D bioprinting of photocrosslinkable hydrogel constructs , 2015 .

[25]  J. Langford,et al.  Scherrer after sixty years: a survey and some new results in the determination of crystallite size , 1978 .

[26]  M. Savaris,et al.  Influence of different sterilization processes on the properties of commercial poly(lactic acid). , 2016, Materials science & engineering. C, Materials for biological applications.

[27]  Hiroshi Mitomo,et al.  Degradation of poly(l-lactic acid) by γ-irradiation , 2001 .

[28]  P. Pagès,et al.  Processing of poly(lactic acid): characterization of chemical structure, thermal stability and mechanical properties , 2010 .

[29]  Ali P. Gordon,et al.  An approach for mechanical property optimization of fused deposition modeling with polylactic acid via design of experiments , 2016 .

[30]  A. M. El-hadi,et al.  Correlation between degree of crystallinity, morphology, glass temperature, mechanical properties and biodegradation of poly (3-hydroxyalkanoate) PHAs and their blends , 2002 .

[31]  A. Schindler,et al.  Polylactide. II. Viscosity–molecular weight relationships and unperturbed chain dimensions , 1979 .

[32]  K. Reichert,et al.  Thermal degradation of poly-L-lactide-studies on kinetics, modelling and melt stabilisation , 1997 .

[33]  J. Feijen,et al.  Influence of electron beam irradiation on physicochemical properties of poly(trimethylene carbonate) , 2011 .

[34]  Catia Bastioli,et al.  Effect of molecular weight and crystallinity on poly(lactic acid) mechanical properties , 1996 .