Tests on Stub Columns of Concrete-filled RHS Sections

The behavior of stub columns of concrete-filled rectangular hollow sections (RHS) subjected to axial load was investigated experimentally. A total of 24 specimens were studied. The main parameters varied in the tests are: (1) constraining factor (ξ) from 0.5 to 1.3, (2) tube width ratio (β) from 1.0 to 1.75. The main objectives of these tests were threefold: firstly, to describe a series of tests on composite columns; and secondly, to analyze the influence of several parameters such as constraining factor and width ratio on the behavior of stub concrete-filled RHS columns. And finally, to compare the accuracy of the predictions by using the recommendations of LRFD (AISC. Load and resistance factor design specification for structural steel buildings. 1994), AIJ (Architectural Institute of Japan. Recommendations for design and construction of concrete filled steel tubular structures, 1997), EC4 (Eurocode 4. Design of steel and concrete structures, Part 1.1, General rules and rules doe building. 1996) and GJB4142-2000 (GJB4142-2000. Technical specifications for early-strength model composite structures. 2001). Experimental results indicate that the constraining factor and the width ratio have significant influence on both the compressive load capacity and the ductility of the steel tube. The loading capacity of the concrete-filled RHS stub columns can be conservatively predicted by using LRFD, AIJ, EC4 and GJB4142-2000 recommendations. The GJB4142-2000 methods gave closer predictions of the test results than the LRFD, EC4 and AIJ methods, and are acceptable for the calculation of the section capacity for axially loaded concrete-filled RHS stub columns.

[1]  Reinhard Bergmann,et al.  Design guide for concrete filled hollow section columns under static and seismic loading , 1995 .

[2]  Russell Q. Bridge,et al.  Tests on Circular Thin-walled Steel Tubes Filled with Medium and High Strength Concrete , 1998 .

[3]  Lin-Hai Han,et al.  Fire performance of concrete filled steel tubular beam-columns , 2001 .

[4]  M. Joyce,et al.  Strength of Eccentrically Loaded Slender Steel Tubular Columns Filled With High-Strength Concrete , 1992 .

[5]  Richard W. Furlong,et al.  Strength of Steel-Encased Concrete Beam Columns , 1967 .

[6]  Hanbin Ge,et al.  Cyclic Tests of Concrete-Filled Steel Box Columns , 1996 .

[7]  Stephen P. Schneider,et al.  Axially Loaded Concrete-Filled Steel Tubes , 1998 .

[8]  R. S. Ghosh,et al.  STRENGTHENING OF SLENDER HOLLOW STEEL COLUMNS BY FILLING WITH CONCRETE , 1977 .

[9]  Robert Park,et al.  Axial Load Design for Concrete Filled Steel Tubes , 1970 .

[10]  M. Ala Saadeghvaziri,et al.  State of the Art of Concrete-Filled Steel Tubular Columns , 1997 .

[11]  Robert Park,et al.  Strength of Concrete Filled Steel Tubular Columns , 1969 .

[12]  Yong Wang Tests on slender composite columns , 1999 .

[13]  Richard W. Furlong Design of Steel-Encased Concrete Beam-Columns , 1968 .

[14]  Lin-Hai Han,et al.  The Influence of Concrete Compaction on the Strength of Concrete Filled Steel Tubes , 2000 .

[15]  R Q Bridge Concrete filled steel tubular columns , 1976 .

[16]  Hanbin Ge,et al.  Strength of Concrete‐Filled Thin‐Walled Steel Box Columns: Experiment , 1992 .

[17]  Masahide Tomii,et al.  Experimental Studies on Concrete-Filled Steel Tubular Stub Columns under Concentric Loading , 1977 .

[18]  Hanbin Ge,et al.  Strength analysis of concrete-filled thin-walled steel box columns , 1994 .

[19]  N. J. Gardner,et al.  Structural Behavior of Concrete Filled Steel Tubes , 1967 .