An improved PWM control method to reduce surge current through capacitors in hybrid-clamped multilevel inverter

An improved pulse width modulation (PWM) control method for three-phase hybrid-clamped multilevel inverters (HCMLI) is proposed in this paper. It can significantly reduce the surge currents through the DC link capacitors by changing the relative phase of the three-phase PWM carriers. The surge currents increase the capacitor losses and decrease the capacitor life, thus increasing the cost and reducing the reliability of inverters. The operating principle of the hybrid-clamped multilevel inverter, the generation mechanism of the surge currents, and the principle of the improved PWM method are given. The simulated and experimental results show that compared with the general PWM method, the improved PWM method can effectively reduce the voltage ripples on the DC link capacitors, consequently decreasing the surge currents through them.

[1]  Xiangning He,et al.  A hybrid clamped multilevel inverter topology with neutral point voltage balancing ability , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[2]  Jing Zhao,et al.  A Novel PWM Control Method for Hybrid-Clamped Multilevel Inverters , 2010, IEEE Transactions on Industrial Electronics.

[3]  J.I. Leon,et al.  Improving multilevel flying capacitor converters features using new voltage ratios definitions , 2006, MELECON 2006 - 2006 IEEE Mediterranean Electrotechnical Conference.

[4]  Xiangning He,et al.  A novel PWM control method to eliminate the effect of dead time on the output waveform for hybrid clamped multilevel inverters , 2010, 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[5]  Ivo Barbi,et al.  Fundamentals of a new diode clamping multilevel inverter , 2000 .

[6]  H. Pinheiro,et al.  Generalised pulse width modulation approach for DC capacitor voltage balancing in diode-clamped multilevel converters , 2011 .

[7]  A.A. Sneineh,et al.  A Hybrid Capacitor-Clamp Cascade Multilevel Converter , 2006, IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics.

[8]  Hirofumi Akagi,et al.  A New Neutral-Point-Clamped PWM Inverter , 1981, IEEE Transactions on Industry Applications.

[9]  Zhan Wang,et al.  A novel hybrid diode-clamp cascade multilevel converter for high power application , 2004, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..

[10]  Thierry Meynard,et al.  Modeling of multilevel converters , 1997, IEEE Trans. Ind. Electron..

[11]  Lu Zhengyu,et al.  A New BLDC Motor Drives Method Based on BUCK Converter for Torque Ripple Reduction , 2006, 2006 CES/IEEE 5th International Power Electronics and Motion Control Conference.

[12]  Ming-yan Wang,et al.  A New Topology of Capacitor-Clamp Cascade Multilevel Converters , 2006, 2006 CES/IEEE 5th International Power Electronics and Motion Control Conference.

[13]  Xiangning He,et al.  Four-bridge Multilevel Converters Based on Hybrid-clamped Techniques , 2006, 2006 CES/IEEE 5th International Power Electronics and Motion Control Conference.

[14]  Zhan Wang,et al.  A new diode-clamp cascade multilevel converter , 2003, IECON'03. 29th Annual Conference of the IEEE Industrial Electronics Society (IEEE Cat. No.03CH37468).