High-Performance Polyethylene fibers

[1]  P. Morse.  Diatomic Molecules According to the Wave Mechanics. II. Vibrational Levels , 1929 .

[2]  W. H. Carothers,et al.  STUDIES OF POLYMERIZATION AND RING FORMATION. XV. ARTIFICIAL FIBERS FROM SYNTHETIC LINEAR CONDENSATION SUPERPOLYMERS , 1932 .

[3]  K. Meyer,et al.  Sur l'élasticité de la cellulose. (Sur la constitution de la partie cristallisée de la cellulose IV) , 1936 .

[4]  K. H. Storks.  An Electron Diffraction Examination of Some Linear High Polymers , 1938 .

[5]  C. Bunn,et al.  The crystal structure of long-chain normal paraffin hydrocarbons. The “shape” of the , 1939 .

[6]  Hans-Dieter Martin,et al.  Das Mülheimer Normaldruck‐Polyäthylen‐Verfahren , 1955 .

[7]  P. H. Till.  The growth of single crystals of linear polyethylene , 1957 .

[8]  A. Keller.  A note on single crystals in polymers: Evidence for a folded chain configuration , 1957 .

[9]  J. E. Dorn,et al.  Anelastic creep of polymethyl methacrylate , 1958 .

[10]  L. Treloar.  Calculations of elastic moduli of polymer crystals: I. Polyethylene and nylon 66 , 1960 .

[11]  K. Nakamae,et al.  Elastic moduli of polymer crystals for the chain axial direction , 1964 .

[12]  A. Peterlin.  Hydrodynamics of macromolecules in a velocity field with longitudinal gradient , 1966 .

[13]  P. R. Pinnock,et al.  The mechanical properties of solid polymers , 1966 .

[14]  W. Statton.  Coherence and Deformation of Lamellar Crystals after Annealing , 1967 .

[15]  A. Pennings,et al.  Hydrodynamically induced crystallization of polymers from solution , 1970 .

[16]  R. Porter,et al.  The properties of polyethylene crystallized under the orientation and pressure effects of a pressure capillary viscometer , 1970 .

[17]  Roger S. Porter,et al.  Polyethylene crystallized under the orientation and pressure of a pressure capillary viscometer. Part I , 1970 .

[18]  F. Frank,et al.  The strength and stiffness of polymers , 1970, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[19]  O. L. Blakslee,et al.  Elastic Constants of Compression-Annealed Pyrolytic Graphite , 1970 .

[20]  A. Pennings,et al.  Hydrodynamically induced crystallization of polymers from solution , 1971 .

[21]  A. Peterlin,et al.  Molecular model of drawing polyethylene and polypropylene , 1971 .

[22]  A. Pennings,et al.  Longitudinal growth of polymer crystals from solutions subjected to single shear flow , 1973 .

[23]  I. Ward,et al.  Properties of Ultra-high Modulus Linear Polyethylenes , 1973 .

[24]  P. Gennes.  Coil-stretch transition of dilute flexible polymers under ultrahigh velocity gradients , 1974 .

[25]  I. Ward,et al.  Preparation of ultra-high modulus linear polyethylenes; effect of molecular weight and molecular weight distribution on drawing behaviour and mechanical properties , 1974 .

[26]  J. H. Greenwood,et al.  Compressive behaviour of Kevlar 49 fibres and composites , 1974 .

[27]  I. Ward,et al.  Ultra-high-modulus linear polyethylene through controlled molecular weight and drawing , 1975 .

[28]  I. M. Ward,et al.  Structure and properties of oriented polymers , 1975 .

[29]  I. Ward,et al.  Effect of molecular weight on the morphology and drawing behaviour of melt crystallized linear polyethylene , 1975 .

[30]  A. Pennings,et al.  Longitudinal growth of polymer crystals from flowing solutions II. Polyethylene crystals in Poiseuille flow , 1975 .

[31]  N. E. Weeks,et al.  Polymer modulus and morphology: The tensile properties of polyethylene , 1975 .

[32]  W. Jackson,et al.  Liquid crystal polymers. I. Preparation and properties of p-hydroxybenzoic acid copolyesters† , 1976 .

[33]  A. Pennings,et al.  Longitudinal growth of polymer crystals from flowing solutions. IV. The mechanical properties of fibrillar polyethylene crystals , 1976 .

[34]  A. Zwijnenburg,et al.  Longitudinal growth of polymer crystals from flowing solutions III. Polyethylene crystals in Couette flow , 1976 .

[35]  I. Ward.  Ultrahigh Modulus Polymers , 1977 .

[36]  J. R. Schaefgen,et al.  Synthesis, Anisotropic Solutions, and Fibers of Poly(1,4-benzamide) , 1977 .

[37]  Anton Peterlin,et al.  Annealing of drawn crystalline polymers , 1978 .

[38]  K. Tashiro,et al.  Calculation of Three-Dimensional Elastic Constants of Polymer Crystals. 2. Application to Orthorhombic Polyethylene and Poly(vinyl alcohol) , 1978 .

[39]  A. G. Gibson,et al.  Dynamic mechanical behaviour and longitudinal crystal thickness measurements on ultra-high modulus linear polyethylene: a quantitative model for the elastic modulus , 1978 .

[40]  I. M. Ward,et al.  Tensile creep and recovery in ultra-high modulus linear polyethylenes , 1978 .

[41]  Pj Piet Lemstra,et al.  Ultrahigh-strength polyethylene filaments by solution spinning/drawing, 2. Influence of solvent on the drawability† , 1979 .

[42]  M. Ratner,et al.  Ab initio calculations of the deformation of polyethylene , 1979 .

[43]  W. B. Black,et al.  High‐strength polyethylene , 1979 .

[44]  Pj Piet Lemstra,et al.  Ultra-drawing of high molecular weight polyethylene cast from solution , 1980 .

[45]  P. J. Lemstra,et al.  Ultra-high-strength polyethylene filaments by solution spinning/drawing , 1980 .

[46]  Pj Piet Lemstra,et al.  Ultra-high strength polyethylene filaments by solution spinning/drawing. 3. Influence of drawing temperature , 1980 .

[47]  D. J. Johnson,et al.  Structural aspects of high modulus aromatic polyamide fibres , 1980, Philosophical transactions of the Royal Society of London. Series A: Mathematical and physical sciences.

[48]  D. J. Johnson,et al.  Compressional behaviour of Kevlar fibres , 1981 .

[49]  ROUTES TO IMPROVED CREEP BEHAVIOUR IN DRAWN LINEAR POLYETHYLENE. , 1981 .

[50]  Pj Piet Lemstra,et al.  Ultradrawing of high-molecular-weight polyethylene cast from solution. II.Influence of initial polymer concentration , 1981 .

[51]  I. M. Ward,et al.  Creep and recovery of ultra high modulus polyethylene , 1981 .

[52]  Pj Piet Lemstra,et al.  Tensile strength of highly oriented polyethylene. II. Effect of molecular weight distribution , 1982 .

[53]  I. Ward,et al.  A study of the adhesion of drawn polyethylene fibre/polymeric resin systems , 1983 .

[54]  T. Kanamoto,et al.  On Ultra-High Tensile Modulus by Drawing Single Crystal Mats of High Molecular Weight Polyethylene , 1983 .

[55]  I. Ward,et al.  Creep and stress-relaxation in ultra-high modulus linear polyethylene , 1984 .

[56]  J. Pennings,et al.  Influence of draw ratio on morphological and structural changes in hot-drawing of UHMW polyethylene fibres as revealed by DSC , 1984 .

[57]  A. J. Pennings,et al.  The fracture process of ultra-high strength polyethylene fibres , 1984 .

[58]  I. M. Ward,et al.  Creep behavior of ultrahigh‐modulus polyethylene: Influence of draw ratio and polymer composition , 1984 .

[59]  P. Smith,et al.  Extension ratios of polymer molecules , 1984 .

[60]  M. Fisher,et al.  Non-Fickian diffusion of water in melamine-formaldehyde resins , 1984 .

[61]  A. Pennings,et al.  Crosslinking of ultra-high molecular weight polyethylene in the oriented state with dicumylperoxide , 1984 .

[62]  R. H. Boyd.  Relaxation processes in crystalline polymers: experimental behaviour — a review , 1985 .

[63]  M. Matsuo,et al.  Dynamic mechanical behavior of ultradrawn polyethylene films produced by gelation/crystallization from solution , 1985 .

[64]  A. Keller,et al.  The extensibility of macromolecules in solution; A new focus for macromolecular science , 1985 .

[65]  H. Chanzy,et al.  Drawing of virgin ultrahigh molecular weight polyethylene: an alternative route to high strength fibres , 1985 .

[66]  R. Farris,et al.  A model for the compressive buckling of extended chain polymers , 1985 .

[67]  P. Meakin,et al.  Theoretical study of the influence of the molecular weight on the maximum tensile strength of polymer fibers , 1985 .

[68]  Pj Piet Lemstra,et al.  Speciality products based on commodity polymers , 1985 .

[69]  A. R. Postema,et al.  Effect of chlorosulfonation of ultra-high strength polyethylene fibres on mechanical properties and bonding with gypsum plaster , 1986 .

[70]  Chain-extended flexible polymers , 1986 .

[71]  P. Meakin,et al.  Theoretical study of the influence of strain rate and temperature on the maximum strength of perfectly ordered and oriented polyethylene , 1986 .

[72]  I. Ward,et al.  Ultra-high-modulus polyethylene fibre composites: I—The preparation and properties of conventional epoxy resin composites , 1986 .

[73]  I. Ward,et al.  Ultra-high-modulus polyethylene fibre composites: II—Effect of resin composition on properties , 1986 .

[74]  Paul S. Smith,et al.  Development of the axial Young's modulus with draw ratio of flexible-chain polymers , 1986 .

[75]  T. He.  AN ESTIMATE OF THE STRENGTH OF POLYMERS , 1986 .

[76]  Y. Termonia,et al.  Theoretical study of the ultimate mechanical properties of poly(p-phenylene-terephthalamide) fibres , 1986 .

[77]  Peter Schwartz,et al.  Effects of Strain Rate and Gauge Length on the Failure of Ultra-High Strength Polyethylene Fibers , 1986 .

[78]  H. Makino,et al.  High‐strength–high‐modulus polyimide fibers II. Spinning and properties of fibers , 1986 .

[79]  Y. Termonia,et al.  Kinetic model for tensile deformation of polymers , 1987 .

[80]  I. Ward,et al.  Influence of surface treatment on adhesion of polyethylene fibres , 1987 .

[81]  I. Ward.  Developments in oriented polymers , 1987 .

[82]  Paul S. Smith,et al.  Drawing of virgin ultrahigh molecular weight polyethylene: An alternative route to high strength/high modulus materials , 1987 .

[83]  R. Porter,et al.  Super-drawing of ultrahigh molecular weight polyethylene. 1. Effect of techniques on drawing of single crystal mats , 1988 .

[84]  K. Nakamae,et al.  Temperature dependence of the elastic modulus of crystalline regions of Poly(ethylene terephthalate) , 1988 .

[85]  F. Arnold.  Structural Modifications of Rigid-Rod Polymers , 1988 .

[86]  D. Grubb,et al.  Effect of drawing on the α relaxation of poly(vinyl alcohol) , 1988 .

[87]  R. Farris,et al.  Experimental verification of a microbuckling model for the axial compressive failure of high performance polymer fibres , 1988 .

[88]  D. Dijkstra,et al.  Temperature-dependent fracture mechanisms in ultra-high strength polyethylene fibers , 1989 .

[89]  A. Pennings,et al.  STUDY ON THE DRAWING BEHAVIOR OF POLY(L-LACTIDE) TO OBTAIN HIGH-STRENGTH FIBERS , 1989 .

[90]  B. Rånby,et al.  Photocrosslinking of polyethylene. I: Photoinitiators, crosslinking agent, and reaction kinetics , 1989 .

[91]  I. Ward,et al.  The adhesion behaviour of high modulus polyethylene fibres following plasma and chemical treatment , 1989 .

[92]  Paul S. Smith,et al.  High strength/high modulus polyethylene: synthesis and processing of ultra-high molecular weight virgin powders , 1989 .

[93]  H. Wagner,et al.  Stochastic strength and size effect in ultra-high strength polyethylene fibres , 1989 .

[94]  Y. Termonia,et al.  Effect of chain-end segregation on the theoretical tensile strength of polyethylene and Kevlar , 1989 .

[95]  J. V. Dingenen,et al.  High performance dyneema fibres in composites , 1989 .

[96]  13C Solid State NMR Study of Ethylene-Vinyl Alcohol Copolymers , 1989 .

[97]  M. Matsuo,et al.  Temperature dependence of crystal lattice modulus and dynamic mechanical properties of ultradrawn polypropylene films , 1989 .

[98]  Leon Le Govaert,et al.  Viscoelastic properties of UHMW‐PE fibers in simple elongation , 1989 .

[99]  Pj Piet Lemstra,et al.  Melting behaviour of gelspun/drawn polyolefins , 1989 .

[100]  R. Farris,et al.  Complications of cylindrical anisotropy on the properties of fibres , 1990 .

[101]  R. Schellekens,et al.  Preparation and characterization of solution(gel)-spun ethylene-vinyl alcohol fibres , 1990 .

[102]  P. Schwartz,et al.  Amination of ultra-high strength polyethylene using ammonia plasma , 1990 .

[103]  K. Yamaura,et al.  Preparation of high modulus poly(vinyl alcohol) by drawing , 1990 .

[104]  T. Kanamoto,et al.  Effects of sample geometry and draw conditions on the mechanical properties of drawn poly(ethylene terephthalate) , 1990 .

[105]  H. L. Doppert,et al.  A semiempiric model for establishing the drawability of solution-spun linear polyamides and other flexible chain polymers , 1990 .

[106]  K. Nakamae,et al.  Temperature dependence of the elastic modulus of crystalline regions of polyoxymethylene , 1990 .

[107]  A. R. Postema,et al.  Ultra-drawing of polyamides : the hydrogen bond barrier , 1990 .

[108]  T. Kanamoto,et al.  Preparation of high‐modulus and high‐strength fibers from high molecualar weight poly(ethylene terephthalate) , 1990 .

[109]  Pj Piet Lemstra,et al.  Hybrid composites based on polyethylene and carbon fibres Part 3: Impact resistant structural composites through damage management , 1990 .

[110]  C. Bastiaansen.  Influence of initial polymer concentration in solution and weight-average molecular weight on the drawing behavior of polyethylenes , 1990 .

[111]  Two‐stage drawing of acetone treated poly(ethylene terephthalate) fibers , 1990 .

[112]  C. Bastiaansen,et al.  The theoretical modulus of biaxially oriented polymer films , 1990 .

[113]  Pj Piet Lemstra,et al.  Hybrid composites based on polyethylene and carbon fibres Part 2: influence of composition and adhesion level of polyethylene fibres on mechanical properties , 1990 .

[114]  H. H. Meijer,et al.  ANALOGY BETWEEN THE MODELLING OF PULLOUT IN SOLUTION SPINNING AND THE PREDICTION OF THE VORTEX SIZE IN CONTRACTION FLOWS , 1990 .

[115]  A. Altomare,et al.  Optically active polymers containing side-chain photoreactive benzoin methyl ether moieties , 1990 .

[116]  A. Pennings,et al.  On the theoretical strength of gelspun/hotdrawn ultra-high molecular weight polyethylene fibres , 1990 .

[117]  D. E. Beers,et al.  Vectran High-performance Fibre , 1990 .

[118]  B. Pourdeyhimi,et al.  Mechanical performance of ultra-high-strength polyethylene fibers , 1991 .

[119]  Li-Hui Wang,et al.  Two-stage drawing of high-molecular-weight polyethylene reactor powder , 1991 .

[120]  Oriented structures based on flexible polymers : drawing behaviour and properties , 1991 .

[121]  Leon Le Govaert,et al.  A micromechanical approach to the viscoelasticity of unidirectional hybrid composites , 1991 .

[122]  I. Ward,et al.  A study of the influence of fibre/resin adhesion on the mechanical behaviour of ultra-high-modulus polyethylene fibre composites , 1991 .

[123]  F. Mcgarry,et al.  Mechanical behaviour of rigid-rod polymer fibres: 2. Improvement of compressive strength☆ , 1991 .

[124]  A. Peijs,et al.  Hybrid composites based on polyethylene and carbon fibres. Part 4: Influence of hybrid design on impact strength , 1991 .

[125]  R. Schellekens,et al.  The drawing behavior of polyvinylalcohol fibers , 1991 .

[126]  K. Nakamae,et al.  Temperature dependence of the elastic modulus of crystalline regions of isotactic poly(4-methyl-1-pentene) , 1991 .

[127]  Aajm Ton Peijs,et al.  Impact resistant and damage tolerant hybrid composite structures based on carbon and polyethylene fibers , 1991 .

[128]  A. Pennings,et al.  Tensile deformation of high strength and high modulus polyethylene fibers , 1991 .

[129]  A. Netravali,et al.  Surface modification of UHSPE fibers through allylamine plasma deposition. II. Effect on fiber and fiber/epoxy interface , 1992 .

[130]  C. Bastiaansen,et al.  Tensile strength of solution-spun, ultra-drawn ultra-high molecular weight polyethylene fibres: 2. Influence of propylene comonomer content , 1992 .

[131]  A Raman microscopy study of stress transfer in high‐performance epoxy composites reinforced with polyethylene fibers , 1992 .

[132]  M. Northolt,et al.  Lyotropic main chain liquid crystal polymers , 1992 .

[133]  Z. Mathys,et al.  Plasma surface modification of advanced organic fibres , 1992, Journal of Materials Science.

[134]  C. Bastiaansen.  Tensile strength of solution-spun, ultra-drawn ultra-high molecular weight polyethylene fibres: 1. Influence of fibre diameter , 1992 .

[135]  A. Bunsell,et al.  Solid phase change controlling the tensile and creep behaviour of gel-spun high-modulus polyethylene fibres , 1992, Journal of Materials Science.

[136]  W. Sweeny.  Improvements in compressive properties of high modulus fibers by crosslinking , 1992 .

[137]  K. Nakamae,et al.  Temperature dependence of the elastic modulus of crystalline regions of polyethylene with different microstructures—explanation with the kinked-chain model , 1992 .

[138]  Pj Piet Lemstra,et al.  Deformation behavior of oriented UHMW-PE fibers , 1992 .

[139]  Benjamin J. Brown,et al.  Temperature dependence of the Young's modulus of oriented polyethylene , 1992 .

[140]  Aajm Ton Peijs,et al.  Hybrid composites based on polyethylene and carbon fibres Part V Energy absorption under quasi-static crash conditions , 1992 .

[141]  A. Pennings,et al.  Preparation and properties of absorbable fibres from l-lactide copolymers , 1993 .

[142]  I. Ward,et al.  The hot compaction of high modulus melt-spun polyethylene fibres , 1993 .

[143]  C. M. Kindervater,et al.  Composite Strength and Energy Absorption as an Aspect of Structural Crash Resistance , 1993 .

[144]  Pj Piet Lemstra,et al.  Improved adhesive properties of high-modulus polyethylene structures , 1993 .

[145]  Shang‐lin Gao,et al.  Surface modification of ultrahigh molecular weight polyethylene fibers by plasma treatment. II. Mechanism of surface modification , 1993 .

[146]  Aajm Ton Peijs,et al.  Creep behaviour of Hybrid Composites Based on Polyethylene and Carbon Fibres , 1993 .

[147]  M. Silverstein,et al.  Mechanical properties and failure of etched UHMW-PE fibres , 1993, Journal of Materials Science.

[148]  F. Mercx.  Improved adhesive properties of high-modulus polyethylene structures: 2. Corona grafting of acrylic acid , 1993 .

[149]  H. Yang,et al.  Kevlar Aramid Fiber , 1993 .

[150]  B. Lommerts,et al.  Structure and melting of perfectly alternating ethylene‐carbon monoxide copolymers , 1993 .

[151]  Shang-Lin Gao,et al.  Surface modification of ultrahigh molecular weight polyethylene fibers by plasma treatment. I. Improving surface adhesion , 1993 .

[152]  Wettability and flotation of etched ultra high molecular weight polyethylene fibres , 1993 .

[153]  Aajm Ton Peijs,et al.  Hybrid composites based on polyethylene and carbon fibres. Part 6: Tensile and fatigue behaviour , 1993 .

[154]  L. Govaert,et al.  Stress-strain analysis of oriented polyethylene , 1993 .

[155]  M. Silverstein,et al.  Adhesive properties and failure of etched UHMW-PE fibres , 1993, Journal of Materials Science.

[156]  T. Peijs,et al.  Strain rate and temperature effects on energy absorption of polyethylene fibres and composites , 1994 .

[157]  H. Yasuda,et al.  Short branch effects on the creep properties of the ultra‐high strength polyethylene fibers , 1994 .

[158]  P. J. Lemstra,et al.  The role of interface and fibre anisotropy in controlling the performance of polyethylene-fibre-reinforced composites , 1994 .

[159]  F. Mercx.  Improved adhesive properties of high-modulus polyethylene structures: 3. Air- and ammonia-plasma treatment , 1994 .

[160]  F. Arnold.  Rigid-rod polymers and molecular composites , 1994 .

[161]  Aj Pennings,et al.  Influence of chemical crosslinking on the creep behavior of ultra-high molecular weight polyethylene fibers , 1994 .

[162]  Structure development in polyketone and polyalcohol fibers , 1994 .

[163]  T. Peijs,et al.  Influence of applied stress and temperature on the deformation behaviour of high-strength poly(vinyl alcohol) fibres , 1995 .

[164]  T. Peijs,et al.  Tensile strength and work of fracture of oriented polyethylene fibre , 1995 .

[165]  T. Peijs,et al.  Mechanical properties of poly(vinyl alcohol) fibres and composites , 1995 .

[166]  M. Yasuniwa,et al.  Melting and Crystallization of Ultra-High Molecular Weight Polyethylene with Appearance of Hexagonal Phase I. Melting Processes of Fibers under Constrained State , 1996 .

[167]  S. Nishijima,et al.  Coil Bobbin for Stable Superconducting Coils , 1996 .

[168]  Seeram Ramakrishna,et al.  Energy Absorption Characteristics of Crash Worthy Structural Composite Materials , 1997 .

[169]  S. Ramakrishna.  MICROSTRUCTURAL DESIGN OF COMPOSITE MATERIALS FOR CRASHWORTHY STRUCTURAL APPLICATIONS , 1997 .

[170]  Impact Response and Failure Mechanisms of Ultrahigh Modulus Polyethylene Fiber Composites and Polyethylene Fiber-Carbon Fiber Hybrid Composites , 1997 .

[171]  I. Ward,et al.  The hot compaction of SPECTRA gel-spun polyethylene fibre , 1997 .

[172]  D. Sikkema.  Design, synthesis and properties of a novel rigid rod polymer, PIPD or `M5': high modulus and tenacity fibres with substantial compressive strength , 1998 .

[173]  R. Meier,et al.  Ultra strong polymer fibers: Ab initio calculations on polyethylene , 1998 .

[174]  T. Ogawa,et al.  Mechanical properties of ultrahigh‐molecular‐weight polyethylene fiber‐reinforced PE composites , 1998 .

[175]  I. Chodák.  High modulus polyethylene fibres: preparation, properties and modification by crosslinking , 1998 .

[176]  M. Northolt,et al.  Mechanical properties and structural transitions in the new rigid-rod polymer fibre PIPD (`M5') during the manufacturing process , 1998 .

[177]  A comparison of the properties of hot compacted gel-spun polyethylene fibre composites with conventional gel-spun polyethylene fibre composites , 1999 .

[178]  C. Choy,et al.  Compressive and flexural behavior of ultra-high-modulus polyethylene fiber and carbon fiber hybrid composites , 1999 .

[179]  A novel, efficient route for the crosslinking and creep improvement of high modulus and high strength polyethylene fibres , 2000 .

[180]  T. Kitagawa,et al.  An analysis of deformation process on poly‐p‐phenylenebenzobisoxazole fiber and a structural study of the new high‐modulus type PBO HM+ fiber , 2000 .

[181]  G. Wijs,et al.  Bond Scission in a Perfect Polyethylene Chain and the Consequences for the Ultimate Strength , 2000 .

[182]  J. Hearle,et al.  High-performance Fibres , 2001 .

[183]  M. Jacobs,et al.  Ballistic protection mechanisms in personal armour , 2001 .