IMC-based PID controllers design for torsional vibration system

In the paper presents performance speed control design of PID controllers for a torsional vibration system based on internal model control (IMC). For the model of the trosional vibration suppression in two-mass system which includes an IMC filter must be selected properly so that the designed IMC controllers can be approximated as PID controller by using Maclaurin approximation, are increasingly required in embedded system implemented on microcontrollers, oriented controlled ac motor drive system trosional vibration mechanical system, the characteristics of speed controller and typical IMC-PID speed controller. The simulation and experiment results verify the applicability and satisfied performance of the proposed control system.

[1]  T. Harris,et al.  "Internal model control. 4. PID controller design." Comments , 1987 .

[2]  H. H. Rosenbrock,et al.  Computer Aided Control System Design , 1974, IEEE Transactions on Systems, Man, and Cybernetics.

[3]  Y. Ebihara.  Dual LMI approach to linear positive system analysis , 2012, 2012 12th International Conference on Control, Automation and Systems.

[4]  Noriyuki Komine,et al.  IMC-based PID controllers design for a two-links SCARA robot , 2011, TENCON 2011 - 2011 IEEE Region 10 Conference.

[5]  Quan Ling,et al.  Base on all-pole approximation a new internal model PID control method for the system with time delays , 2009, 2009 International Conference on Mechatronics and Automation.

[6]  M. Morari,et al.  Internal model control: PID controller design , 1986 .

[7]  Junji Furusho,et al.  Speed control of two-inertia system by PI/PID control , 1999, Proceedings of the IEEE 1999 International Conference on Power Electronics and Drive Systems. PEDS'99 (Cat. No.99TH8475).