Temperature dependence of electrical resistivity for carbon black filled ultra-high molecular weight polyethylene composites prepared by hot compaction

In this article, the temperature dependence of electrical resistivity is studied for carbon black (CB)/ultra-high molecular weight polyethylene (UHMWPE) composites. A new positive temperature coefficient (PTC) material with a very low percolation threshold is produced by the hot compaction method. The very low percolation threshold can be attributed to the segregation of CB in the interfacial regions of UHMWPE particles. The percolation threshold decreases with the increase of the molecular weight of UHMWPE, and with the decrease of the particle size of CB. For CB filled lower molecular weight UHMWPE (145M) composites, the PTC temperature, at which a sharp increase in the resistivity of the composite occurs, decreases with the increase of CB size. However, for a higher molecular weight UHMWPE (630M) filled with CB, the second PTC effect is observed and the negative temperature coefficient (NTC) effect is eliminated. A mechanism is proposed to explain these phenomena based on the optical microscopy and TEM observations. It can be concluded that the degree of the intermixing between CB and UHMWPE particles plays an important role in determining the electrical properties of the composites.

[1]  A. Malliaris,et al.  Influence of Particle Size on the Electrical Resistivity of Compacted Mixtures of Polymeric and Metallic Powders , 1971 .

[2]  J. Meyer.  Stability of polymer composites as positive-temperature-coefficient resistors , 1974 .

[3]  M. Sumita,et al.  Electrical conductivity of short carbon fiber filled HDPE/PMMA blends: effect of molding temperature and time , 1998 .

[4]  F. Ehrburger-Dolle,et al.  Electrical conductivity of carbon black–polyethylene composites: Experimental evidence of the change of cluster connectivity in the PTC effect , 2001 .

[5]  M. Sumita,et al.  Morphology, crystallization and melting behaviors of isotactic polypropylene/high density polyethylene blend: effect of the addition of short carbon fiber , 2000 .

[6]  T. Kimura,et al.  Self-temperature-control heaters by graphite-poly(ethylene glycol) mixed systems: mechanism of electrical conduction , 1988 .

[7]  A. Voet.  Temperature Effect of Electrical Resistivity of Carbon Black Filled Polymers , 1981 .

[8]  D. Ma,et al.  Property balancing for polyethylene-based carbon black-filled conductive composites , 1998 .

[9]  Guozhang Wu,et al.  Properties and applications of filled conductive polymer composites , 1997 .

[10]  M. Matsuo,et al.  Positive temperature coefficient effect of LMWPE–UHMWPE blends filled with short carbon fibers , 2004 .

[11]  J. Woods,et al.  I-V characteristics of carbon black-loaded crystalline polyethylene , 1993 .

[12]  M. Matsuo,et al.  Electrical properties of polyethylene and carbon black particle blends prepared by gelation/crystallization from solution , 2002 .

[13]  Kazuyuki Ohe,et al.  A New Resistor Having An Anomalously Large Positive Temperature Coefficient , 1971 .

[14]  A. Medalia.  Electrical Conduction in Carbon Black Composites , 1986 .

[15]  C. Klason,et al.  Anomalous behavior of electrical conductivity and thermal noise in carbon black‐containing polymers at Tg and Tm , 1975 .

[16]  M. Sumita,et al.  Selective location of the filler and double percolation of Ketjenblack filled High Density Polyethylene/Isotactic Polypropylene blends , 1998 .

[17]  M. Sumita,et al.  Characterization of dispersion state of filler and polymer-filler interactions in rubber-carbon black composites , 1996 .

[18]  M. Sumita,et al.  Morphology and electrical properties of short carbon fiber‐filled polymer blends: High‐density polyethylene/poly(methyl methacrylate) , 1998 .

[19]  Yoshiyuki Asano,et al.  Self-temperature-control plane heaters by polyethylene glycol-graphite systems. 3 , 1996 .

[20]  M. Sumita,et al.  Selective location and double percolation of short carbon fiber filled polymer blends: high-density polyethylene/isotactic polypropylene , 1998 .

[21]  J. Meyer,et al.  Glass transition temperature as a guide to selection of polymers suitable for PTC materials , 1973 .

[22]  M. Narkis,et al.  Effect of crosslinking on carbon black/polyethylene switching materials , 1980 .