Comparison of BEM-CFD and full rotor geometry simulations for the performance and flow field of a marine current turbine

Recent studies have coupled blade element momentum (BEM) theory with the Reynolds Averaged Navier–Stokes equations in computational fluid dynamics (CFD) software, as the BEM-CFD method to analyse the flows in marine current turbines is with much less computational resources. The accuracy of the BEM-CFD calculation was evaluated by analysing the performance and flow field characteristics of an isolated horizontal axis marine current turbine with comparisons to a full rotor geometry simulation and experimental data. The comparisons show that the full rotor geometry simulation gives good predictions near the optimal conditions (TSR = 5–7), but is less accurate for off-design conditions. The BEM-CFD results, which are based on two-dimensional hydrofoil theory, are evaluated using the experimental and numerical lift and drag coefficients. It shows that the two-dimensional lift and drag coefficients had significant effects on the BEM-CFD predictions. Overall, the BEM-CFD based on the numerical hydrofoil data can accurately predict the thrust, but generally overestimates the power. The influence of the lift and drag terms on the BEM-CFD predictions suggest that more reasonable 2D predictions for hydrofoils and the 3D effects should be considered to improve the BEM-CFD accuracy. BEM-CFD can reasonably reflect the circumferential averaged velocity characteristics near the rotor for the optimal condition (TSR = 6) and gets symmetrical features in the wake, but it cannot predict the detailed flow features caused by the finite number of blades due to the limitations of the BEM-CFD method.

[1]  A. Bahaj,et al.  A blade element actuator disc approach applied to tidal stream turbines , 2010, OCEANS 2010 MTS/IEEE SEATTLE.

[2]  P. Moriarty,et al.  A large-eddy simulation study of wake propagation and power production in an array of tidal-current turbines , 2013, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[3]  D. C. Janetzke,et al.  Theoretical and experimental power from large horizontal-axis wind turbines , 1982 .

[4]  Fotis Sotiropoulos,et al.  Numerical simulation of 3D flow past a real-life marine hydrokinetic turbine , 2012 .

[5]  T. Y. Chen,et al.  Blockage corrections in wind tunnel tests of small horizontal-axis wind turbines , 2011 .

[6]  Young-Ho Lee,et al.  Large eddy simulation of the wind turbine wake characteristics in the numerical wind tunnel model , 2013 .

[7]  Ervin Bossanyi,et al.  Wind Energy Handbook , 2001 .

[8]  Jun Li,et al.  Numerical investigations of the effects of different arrays on power extractions of horizontal axis tidal current turbines , 2013 .

[9]  A. Bahaj,et al.  Comparison between CFD simulations and experiments for predicting the far wake of horizontal axis tidal turbines , 2010 .

[10]  Alexander B. Phillips,et al.  Modelling tidal current turbine wakes using a coupled RANS-BEMT approach as a tool for analysing power capture of arrays of turbines , 2011 .

[11]  L. E. Myers,et al.  An experimental investigation simulating flow effects in first generation marine current energy converter arrays , 2012 .

[12]  Anthony F. Molland,et al.  Measurements and predictions of forces, pressures and cavitation on 2-D sections suitable for marine current turbines , 2004 .

[13]  Anthony F. Molland,et al.  Power and thrust measurements of marine current turbines under various hydrodynamic flow conditions in a cavitation tunnel and a towing tank , 2007 .

[14]  M. Drela XFOIL: An Analysis and Design System for Low Reynolds Number Airfoils , 1989 .

[15]  A. Bahaj,et al.  Accuracy of the actuator disc-RANS approach for predicting the performance and wake of tidal turbines , 2013, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[16]  Anthony F. Molland,et al.  EXPERIMENTALLY VALIDATED NUMERICAL, METHOD FOR THE HYDRODYNAMIC DESIGN OF HORIZONTAL AXIS TIDAL TURBINES , 2007 .

[17]  Anthony F. Molland,et al.  Hydrodynamics of marine current turbines , 2006 .

[18]  T. N. Croft,et al.  A coupled blade element momentum – Computational fluid dynamics model for evaluating tidal stream turbine performance , 2013 .