Effect of dewatering on the strength of lime and cement mortars

This paper investigates the effects of dewatering on the strength and microstructure of mortars manufactured from Portland cement, hydrated calcium lime (CL90), and natural hydraulic limes of classification 2, 3.5, and 5 with binder/aggregate/water ratios of 1:2:0.78. Dewatering was achieved by placing the mortars on a high porosity brick. Dewatered and nondewatered specimens were exposed to an atmosphere containing 400 ppm carbon dioxide with a relative humidity of 65%, at 20°C for periods of 14, 28, and 56 days. Following hardening for these periods, compressive strengths were compared with evaluate the mechanical performance. The structural morphology of the samples was determined using scanning electron microscopy and chemical composition by Raman spectroscopy. Results showed CL90 mortars are unaffected by dewatering. However, dewatering resulted in an increase in the compressive strength for the hydraulic limes and cement mortars tested.

[1]  D. Gastaldi,et al.  The use of Raman spectroscopy as a versatile characterization tool for calcium sulphoaluminate cements: a compositional and hydration study , 2007 .

[2]  Sagrario Martínez-Ramírez,et al.  MICRO-RAMAN SPECTROSCOPY APPLIED TO DEPTH PROFILES OF CARBONATES FORMED IN LIME MORTAR , 2003 .

[3]  C. Ince,et al.  Analysis of the abstraction of water from freshly mixed jointing mortars in masonry construction , 2010 .

[4]  R. Ball,et al.  Pozzolanic properties of glass fines in lime mortars , 2007 .

[5]  R. Hemley,et al.  Raman spectroscopic study of microcrystalline silica , 1994 .

[6]  H. Rutt,et al.  Raman spectra of carbonates of calcite structure , 1974 .

[7]  I. Sobrados,et al.  Solid-state 27Al and 29Si NMR characterization of hydrates formed in calcium aluminate–silica fume mixtures , 2008 .

[8]  R. Cuscó,et al.  Hydration and carbonation of monoclinic C2S and C3S studied by Raman spectroscopy , 2007 .

[9]  D. D’Ayala,et al.  Determination of carbonation profiles in non-hydraulic lime mortars using thermogravimetric analysis , 2006 .

[10]  W. D. Hoff,et al.  Theoretical development and validation of a Sharp Front model of the dewatering of a slurry by an absorbent substrate , 2007 .

[11]  J. Yarwood,et al.  Structural Features of C–S–H(I) and Its Carbonation in Air—A Raman Spectroscopic Study. Part II: Carbonated Phases , 2007 .

[12]  B. Reynard,et al.  Raman Spectroscopic Investigations of Dicalcium Silicate: Polymorphs and High‐Temperature Phase Transformations , 2005 .

[13]  J. Larbi,et al.  Composition of lime-cement and air-entrained cement mortar as a function of distance to the brick-mortar interface: consequences for masonry , 2000 .

[14]  Victor M. Ferreira,et al.  Influence of the kneading water content in the behaviour of single-coat mortars , 2005 .

[15]  J. Serratosa,et al.  Silicon-29 and aluminum-27 high-resolution MAS-NMR spectra of phyllosilicates , 1984 .

[16]  J. Lanas,et al.  MECHANICAL PROPERTIES OF NATURAL HYDRAULIC LIME-BASED MORTARS , 2004 .

[17]  L. Black,et al.  SEM–SCA: combined SEM – Raman spectrometer for analysis of OPC clinker , 2007 .