Pd/B4C/Y multilayer coatings for extreme ultraviolet applications near 10  nm wavelength.

A new extreme ultraviolet (EUV) multilayer coating has been developed comprising Pd and Y layers with thin B4C barrier layers at each interface, for normal incidence applications near 10 nm wavelength. Periodic, nonperiodic, and dual-stack coatings have been investigated and compared with similar structures comprising either Mo/Y or Pd/B4C bilayers. We find that Pd/B4C/Y multilayers provide higher reflectance than either Mo/Y or Pd/B4C, with much lower film stress than Pd/B4C. We have also investigated the performance of periodic multilayers comprising repetitions of Pd/Y, Ru/Y, or Ru/B4C/Y, as well as Pd/B4C multilayers deposited using reactive sputtering with an Ar:N2 gas mixture in order to reduce stress: these material combinations were all found to provide poor EUV performance. The temporal stability of a periodic Pd/B4C/Y multilayer stored in air was investigated over a period of 16 months, and a slight reduction in peak reflectance was observed. Periodic Pd/B4C/Y multilayers were also found to be thermally stable up to 100°C; at higher temperatures (200°C and 300°C) we observe a slight reduction in peak reflectance and a slight increase in multilayer period. High-resolution transmission electron microscopy and selected area diffraction of an as-deposited Pd/B4C/Y film indicates a fully amorphous structure, with interfaces that are both smoother and more abrupt than those observed in a comparable Pd/B4C multilayer in which the Pd layers are polycrystalline. The new Pd/B4C/Y multilayers are suitable for normal-incidence imaging and spectroscopy applications, including solar physics, plasma physics, high-brightness EUV light sources, and others.

[1]  S. O. Kastner,et al.  Solar-flare emission lines in the range from 66 to 171 A; 2sr 2pk - 2s/r-1/ 2p/k+1/ transitions in highly ionized iron , 1974 .

[2]  Benjawan Kjornrattanawanich,et al.  Structural characterization and lifetime stability of Mo/Y extreme-ultraviolet multilayer mirrors. , 2004, Applied optics.

[3]  Maria Guglielmina Pelizzo,et al.  Extreme ultraviolet multilayer for the FERMI@Elettra free electron laser beam transport system. , 2012, Optics express.

[4]  Craig E. Deforest,et al.  The High-Resolution Coronal Imager (Hi-C) , 2014 .

[5]  David L. Windt,et al.  IMD—software for modeling the optical properties of multilayer films , 1998 .

[6]  Regina Soufli,et al.  Multisegmented, multilayer-coated mirrors for the Solar Ultraviolet Imager , 2013 .

[7]  B. Weir,et al.  Stress relaxation in Mo/Si multilayer structures , 1992 .

[8]  Eric M. Gullikson,et al.  Recent developments in EUV reflectometry at the Advanced Light Source , 2001, SPIE Advanced Lithography.

[9]  Charles M. Falco,et al.  Survey of Ti-, B-, and Y-based soft x-ray-extreme ultraviolet multilayer mirrors for the 2- to 12-nm wavelength region. , 1996, Applied optics.

[10]  R. S. Rosen,et al.  Fabrication of high‐reflectance Mo–Si multilayer mirrors by planar‐magnetron sputtering , 1991 .

[11]  J. Gautier,et al.  Two channel multilayer mirrors for astrophysics , 2008 .

[12]  David L. Windt,et al.  Reduction of stress and roughness by reactive sputtering in W/B4C multilayer films , 2007, SPIE Optical Engineering + Applications.

[13]  R S Rosen,et al.  Normal-incidence x-ray mirror for 7 nm. , 1991, Optics letters.

[14]  Molybdenum-strontium multilayer mirrors for the 8-12-nm extreme-ultraviolet wavelength region. , 2001, Optics letters.

[15]  David L. Windt,et al.  Depth-graded Co/C multilayers prepared by reactive sputtering , 2009, Optical Engineering + Applications.

[16]  D. Windt,et al.  Multilayer facilities required for extreme‐ultraviolet lithography , 1994 .

[17]  C. J. Wolfson,et al.  The Atmospheric Imaging Assembly (AIA) on the Solar Dynamics Observatory (SDO) , 2011 .

[18]  F. Salmassi,et al.  Optical constants of magnetron-sputtered boron carbide thin films from photoabsorption data in the range 30 to 770 eV. , 2008, Applied optics.