Characterization of soluble and insoluble components in PM2.5 and PM10 fractions of airborne particulate matter in Kofu City, Japan

Abstract A systematic method combining water and diluted-acid extractions has been developed for the manifold evaluation of soluble and insoluble fractions in ambient aerosol. The pre-washed regenerated cellulose membrane filter was used as a collection medium of a low-volume air sampler. The collection time of 7–14 days was required to obtain the sample amounts enough for the systematic analysis. Simple and efficient extraction procedures using the filtration of water and 0.1 M hydrochloric acid were recommended in order to obtain the information about the dissolution behaviors of various elements in the aerosol. Soluble components in both the extracts were determined by inductively coupled plasma atomic emission spectrometry (ICP-AES) and ion chromatography (IC). These extraction procedures were also preferred to prepare thin-layer specimens suitable to the succeeding X-ray fluorescence spectrometry (XRF) for insoluble components. Elemental compositions of the extraction residues were conveniently determined by the XRF calibrated with thin-layer standard specimens prepared with activated carbon. The determination of the 17 representative elements (Na, Mg, Al, Si, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Cu, Zn, Br, Pb) in these three fractions from an aerosol sample was performed rapidly within 4 h. The proposed systematic method was applied to PM 2.5 and PM 10 aerosol samples collected in Kofu City, Central Japan, and the enrichment behaviors of various elements and their source apportionment such as soil, anthropogenic substances and vehicle exhaust particulates could be demonstrated by the present method.